Re: Referencing a word template

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Mark,

If you think that its OK to move to putting templates on the server, I don't recommend it, but I'll tell you what you need to do.

I'm assuming here from the context that the situation is as follows: templates that were formerly at C:\Program Files\Microsoft Office\Office10\Startup were automatically loaded as add-ins, and you want the templates still to be automatically loaded as add-ins in their new location.

It can be done by hand in Word by going to Tools, Options. Click the File Locations tab. Select the Startup folder, click the Modify button and browse to the appropriate folder where your global add-ins are located.

If you are also moving templates that documents are based on onto the network, do the same for the Workgroup Templates folder (which is probably not currently set to anything at all) and point it to where those templates are held.

Do not under any circumstances change the User Templates path to a shared folder. Doing this would change the location where Word looks for normal.dot. Trying to share normal.dot between multiple users is a recipe for several varieties of chaos.

The same thing can be done using automation by setting the values of the Options.DefaultFilePath(wdStartupPath) and Options.DefaultFilePath(wdWorkgroupTemplatesPath) properties

You can also set this directly in the registry, by setting the following values in this key:

HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Common\General

(Within that key, 10.0 is for Office XP. Change it to 9.0 if you have Office 2000 or 11.0 if you use Office 2003)

Within this key, you should set the SharedTemplates value to the path for the Workgroup templates, and the Startup value to the path for your global add-ins.

If you have multiple users sharing a single PC, then you need to modify the equivalent key for every user.

By the way, I have a commercial client (a major internet services company) who thought as you did and placed all the templates I had made for them on the network despite my warnings. After a year or so, they decided I was right and changed to local installation. Items 4 & 5 turned out to be the decisive issue for them.

--
Regards
Jonathan West - Word MVP
www.intelligentdocuments.co.uk
Please reply to the newsgroup
Keep your VBA code safe, sign the ClassicVB petition www.classicvb.org


"Mark" <Mark@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:73417631-D5EC-4953-BE36-54802F241B59@xxxxxxxxxxxxxxxx
Jonathan,

But is there a way to do this?

Here are our answers to your points.

I really, really would recommend you think again on this. Putting templates
on the network has several significant disadvantages.

1. You increase network traffic significantly, reducing the performance of
applicationswhich *must* use the network



We are going to use DFS distribution which uses multiple
‘servers´atstrategic network points to avoid heavy network traffic



2. When opening any document, Word also opens the template it is based on.
Since the time to open a network template is usually greater than for a
templatestored on a local drive, you will increase response times for
opening and creating all documents.



Same answer as one above.


3. If the network or server goes down, many of your organisation's
activitieswill grind to a halt. Do you really want to add word-processing
tothat list?





Same answer as number one. If the network itself goes down force wide, I
don’t think anybody will be worrying about whether the force forms are
loading. If a server goes down then DFS will redirect the user to another
server automatically.


4. If you change the server location at some future date, Word has a bug in
itsuch that when you try to open documents created when the templates were
in the old location, Word will hang for perhaps 2 minutes before deciding
that the template at the old network location is not going to be found. This
problem applies only to documents based on templates stored at a UNC
location, not on templates stored on a local drive. There is a patch for
thisproblem available from Microsoft, but it doesn't seem to be reliable,
and as far as I am aware has never been incorporated into any service pack.



Same answers as above. Also, remember the design of the U drive is based
around the use of DFS as well and is working successfully for over 2 years.


5. If you send Word documents to people outside your organisation, the same
Wordbug will result in their copy of Word hanging, since they will not be
able to access the UNC path of your server. You can't assume that your
customerswill have the patch installed.




6. Templates that are constantly in use are very hard to update - somebody
isbound to leave a document open overnight, which will maintain a lock on
the network template. You will have to break that lock in order to replace
thetemplate with an updated one.


DFS allows for one server to be unavailable to users yet still replicate
data changes, this means that updates can be made to this share without
disconnecting users from the existing template. Template updates to other
servers will then become available as the file becomes unlocked.

--
Mark


"Mark" wrote:

Is there a way with code to reference a template?

We are in the process of moving all our templates to a UNC path and need to
be able to change the existing reference from

C:\Program Files\Microsoft Office\Office10\Startup

to

\\WYP_NT\forms$\Office\Startup

Any solutions would be greatly appreciated.

--
Mark

.

Quantcast