Re: CE 6.0 Remote Tools - How to use? Platform Manager not recommended!

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Bruce:
Thanks for contributing to this issue with CE 6.0 R2.

Verified that "Target Control Support" catalog item is indeed checked
within "Kernel Functionality" group.

Also have tried the procedure documented by Sue Loh at
http://blogs.msdn.com/ce_base/archive/2007/04/02/using-platform-builder-remote-tools-over-activesync.aspx
and that didn't make anything better for me.

based upon her procedure, have tried configuring all combinations of
Transport and Startup Server in "Configure Windows CE Platform
Manager" to no avail:

#1 - Microsoft ActiveSync and KITL Bootstrap Server combo seems
"almost work". Status text indicates "Establishing platform manager
connection to device" forever. Never completes!

#2 - KITL Transport for Windows CE and KITL Bootstrap combo causes
this reaction from the target:
CreateNewProc failure on CEMGRC.EXE!, dwErr = 00000002
NKCreateProcess exit: dwErr = 00000002
OSAXST1: <<< Unloading Module '' (0x8734E264) at address
0x00000000-0x00000000 in Process '' (0x8734E264)

#3 - Microsft ActiveSync and Microsoft ActiveSync combo results in a
pop-up within Platform Builder stating:
"Unable to establish connection with device. Please check
server configuration settings"

For #3 above, are "server configuration settings" referring to options
with Target Connectivty dialog??

Thanks!


On Sep 17, 3:25 pm, "Bruce Eitman [eMVP]"
<bruce.eitman.nos...@xxxxxxxxxxxxxxxxxxx> wrote:
It is something like Target Control in the catalog

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOGhttp://geekswithblogs.net/bruceeitman

EuroTech Inc.www.EuroTech.com

"GeraldH" <ger...@xxxxxxxxxxxxxxxx> wrote in message

news:82ecca10-d44f-4a51-bf23-b28373dd17b8@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks for the info Valter!!

I am using KITL/Ethernet connectivity.  Not sure where/how to specify
usage of  CeShell.GeraldH

On Sep 17, 12:25 am, "Valter Minute [eMVP]"



<valter.minute@xxxxxxxxxxxxxxxxxxx> wrote:
GeraldHwrote:
From this post,
http://blogs.msdn.com/mikehall/archive/2006/11/25/ce-6-0-don-t-add-pl....,
"....Adding the Platform Manager component to a CE 6.0 operating
system design will generate build errors for a platform - the error
will read something like:
Error: Could not find file 'C:\WINCE600\OSDesigns\<Release Dir Path>
\cemgrc.exe' on disk.."

Simple Question: How does one make use of the Remote Tools from CE 6.0
R2 ?

If you are connected trough PB using KITL & CeShell you don't need any
client inside the image.
If your device uses ActiveSync the files will be transferred and
executed as required (you may need to allow them to execute if you
implemented the exe validation functions inside your OAL).
If you want to use them over a TCP/IP link you should add Visual Studio
remote debugging client and use its connectivity layer for the remote
tools (you'll have to launch the tools under the Visual Studio start
menu group and not those from PB tools menu).
To add the VS debugger to your OS design you can check this
article:http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2009/06/12/...
--
Valter Minute (eMVP)www.fortechembeddedlabs.it-Training, support and
development for
Windows CEwww.geekswithblogs.net/WindowsEmbeddedCookbook-My embedded
programming
and cooking blog
(the reply address of this message is invalid)- Hide quoted text -

- Show quoted text -

.

Relevant Pages

  • Re: Remote Tools not connecting
    ... Can you check if platform manager is configured to use CESH + KITL ... > - Enable CE Target Control Support ... > it yields the same result (remote tools not working, ... >>> remote connection as Ethernet for both Download and Kernel Transport, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Connect between Developement Board and eVC use activesync
    ... You shouldn't have to do anything special to eVC for this. ... Install the SDK for the board that you are using, select that platform as ... target device, and open the Configure Platform Manager... ... In the Startup Server drop-down list, make sure that Microsoft ActiveSync ...
    (microsoft.public.windowsce.embedded.vc)
  • Re: Connect VS 2005 to running platform without ActiveSync
    ... Are you sure that you set the target IP address in Device options in VS2005 ... Add the CoreCon functionality to the platform as a catalog component ... If target is an ActiveSync device, ... ActiveSync connection is running. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: User Creation problem in AD
    ... is any connection with RID because im not able to create new ... SOA record data from server: ... Performing upstream analysis. ... Performing downstream (of target) analysis. ...
    (microsoft.public.windows.server.active_directory)
  • Re: Cant update windows
    ... Can you *Start* the Automatic Updates service? ... If you're using Internet Explorer, download the Fixit, MicrosoftFixit50202.msi, by *right* clicking the Fixit icon and choose 'Save Target as'. ... connection to the service. ...
    (microsoft.public.windowsxp.security_admin)