Re: Breakpoint on Operative system

THANKSSSSSS


You do not need to create the autoexec: you can copy it from
%_WINCEROOT%\PLATFORM\CEPC\SRC\BOOTLOADER\DOS\BOOTDISK; with the default
settings the device will try to download the image via ethernet after it
has obtained an IP address from a DHCP server. You can assign a static IP
address modifying autoexec.bat (instruction are provided in the file
itself). All the info you need to configure the device and download the
image are in the help
http://msdn.microsoft.com/en-us/library/bb905573.aspx

--

Luca Calligaris (MVP-Windows Embedded)
l.calligaris.nospam@xxxxxxxxxxxxxxxxxx
www.eurotech.it

"Stefano" <blasiis@xxxxxxxx> ha scritto nel messaggio
news:7sHdl.2371$8Z.391@xxxxxxxxxxxxxxxxxxxxxxxx
Now NK.bin is without error. Now I must create a autoxec that send the
debug command for transfer the operitive syste,m can you send me the
loadcepc command in autoxec for connecting

Thanks

A debug OS image is significally larger (2x typically) then the release
one: you have to modify the MEMORY section of your config.bib file to
handle a bigger RAMIMAGE section.
Maybe it's easier for you to enable the debugger in the release
configuration as explained in the first part of my previous post.

--

Luca Calligaris (MVP-Windows Embedded)
l.calligaris.nospam@xxxxxxxxxxxxxxxxxx
www.eurotech.it

"Stefano" <blasiis@xxxxxxxx> ha scritto nel messaggio
news:_QCdl.2009$8Z.1881@xxxxxxxxxxxxxxxxxxxxxxxx
I was already enabled thi soption, but after make run time image I have
this erorr :

Error 1 @CESYSGEN IF without matching @CESYSGEN ENDIF
C:\WINCE600\PLATFORM\GeodeLX\FILES\platform.reg 550 1 WaferLX800
Error 2 @XIPREGION IF without matching @XIPREGION ENDIF
C:\WINCE600\PLATFORM\GeodeLX\FILES\platform.reg 250 8 WaferLX800
Error 3 @XIPREGION IF without matching @XIPREGION ENDIF
C:\WINCE600\PLATFORM\GeodeLX\FILES\platform.reg 102 9 WaferLX800
Error 20 Error: Image is too large for current RAM and RAMIMAGE
settings
Error 21 Fatal error hit, exiting...
Error 22 makeimg: FATAL ERROR: Command returned non-zero exit code 1
(dec).


If you are building a 'release' OS you can enable it via menu
Project -> <Your Project> Properties -> Configuration Properties ->
Build Options -> Enable kernel debugger. This can be a good choice if
you're debugging a specific (maybe yours?) module since you can build
a debug version of the module itself only (look for COMPILE_DEBUG in
the help); otherwise, if you want full symbolic debugging information
you have to build a 'debug' version of your OS

--

Luca Calligaris (MVP-Windows Embedded)
l.calligaris.nospam@xxxxxxxxxxxxxxxxxx
www.eurotech.it

"Stefano" <blasiis@xxxxxxxx> ha scritto nel messaggio
news:K4Cdl.1945$8Z.901@xxxxxxxxxxxxxxxxxxxxxxxx
How can I do it ?


"Luca Calligaris" <l.calligaris.nospam@xxxxxxxxxxxxxxxxxx> ha scritto
nel messaggio news:uz77ek6eJHA.1184@xxxxxxxxxxxxxxxxxxxxxxx
Have you enabled the kernel debugger?

--

Luca Calligaris (MVP-Windows Embedded)
l.calligaris.nospam@xxxxxxxxxxxxxxxxxx
www.eurotech.it

"Stefano" <blasiis@xxxxxxxx> ha scritto nel messaggio
news:bjBdl.1892$8Z.417@xxxxxxxxxxxxxxxxxxxxxxxx
How can I insert a breakpoint in the operative system WinCE 6.0
platform builder ?
I have enabled KITL and connect my board through ethernet, but it
was not enough, what should I do?


Thanks

Stefano

















.

Relevant Pages

  • Re: Breakpoint on Operative system
    ... All the info you need to configure the device and download the ... Luca Calligaris ... Image is too large for current RAM and RAMIMAGE settings ... Build Options -> Enable kernel debugger. ...
    (microsoft.public.windowsce.platbuilder)
  • kitl debug question
    ... on WINCE 5.0 I have built a debug image, ... I can download the image via ethernet but the debugger never switches to ...
    (microsoft.public.windowsce.platbuilder)
  • Re: PB Debugger The Kernel Debugger is waiting to connect
    ... I debug build NK.bin on PB6.0 and able to download at my target board throgh ... ethernet, But after that I am not able to get connected through KITL. ... PB Debugger The Kernel Debugger is waiting to connect ...
    (microsoft.public.windowsce.platbuilder)
  • RE: PB Debugger The Kernel Debugger is waiting to connect
    ... I debug build NK.bin on PB6.0 and able to download at my target board throgh ... ethernet, But after that I am not able to get connected through KITL. ... PB Debugger The Kernel Debugger is waiting to connect ...
    (microsoft.public.windowsce.platbuilder)
  • PB Debugger The Kernel Debugger is waiting to connect
    ... I debug build NK.bin on PB6.0 and able to download at my target board throgh ... ethernet, But after that I am not able to get connected through KITL. ... PB Debugger The Kernel Debugger is waiting to connect ...
    (microsoft.public.windowsce.platbuilder)