Re: GPRS internet Wince5.0

Tech-Archive recommends: Fix windows errors by optimizing your registry

Thank u Obcd:

How R u?

I had to tell you that i am now connected to the GPRS internet using my modem
over USB port, using my own virtual com port application and upper most,
using windows ce dialupnetworking...

It works fine, connects me to the internet, and then browsing goes on fine.
But when i disconnect it.. The dialer do not disconnect the modem [i think,
here, ATH must be sent perfectly by dialer but something is not going well.

When i disconnect my connection and then try again to connect. The error
arrives that port is not available. "Which according to my knowledge" comes
when modem do not reply OK at initiation.

(First connection attempt works good but once i disconnect then ... Error
arrives)

Also., i have chosen MANUAL terminal to check modem status at second attempt.
here, the modem do not reply on any command i issue. (sometimes, i disconnect
first successful connection, Modem signals are totally dropped and sometimes,
it do not end the DATA call)


Im sorry for pure English and bad writing style., please understand my
problem and give some suggestion if possible.

--
Message posted via PocketPCJunkies.com
http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200811/1

.

Relevant Pages

  • Re: Correction
    ... Normally to physically disconnect is just a matter of reaching for the ... >> I have an ADSL connection which polls my computer from time to time, ... > disallow each and every port with Windows Firewall? ...
    (microsoft.public.windowsxp.messenger)
  • Re: Fax configuration assistance required
    ... from my DSL modem feeds into one side and the line from my fax modem ... in my bedroom to filter out the noise from the DSL and/or fax connection. ... Firewall and 4 Port Switch is connected to the Modem port on the DSL filter ...
    (microsoft.public.windowsxp.print_fax)
  • Re: ISP disconnects
    ... _dial-up_ connection to my ISP, too often several times an hour. ... It's not the ISP, I ... which it does instantly if I disconnect manually. ... Could this be a modem problem? ...
    (microsoft.public.windowsxp.network_web)
  • network hardware- compatible?
    ... dlink DES-1005D 5 ports switch. ... the broadband connection to sister as a new year present. ... modem has 1 RJ45 port on the back. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Modem-to-Modem connection
    ... You are aware that you can connect two computers via a null modem cable ... COM port into an ANALOG signal for transmission over POTS (Plain Old ... The HAYES COMMAND set includes commands to facilitate POTS, ... Establish the connection and then pass that connection off to another ...
    (comp.dcom.modems)