RE: Kernel hangs while loading udevice.exe



Hi Vinoth,

Thanks for your reply

i have removed "OEMGetRealTime()" debug msgs

but there is no difference. what could be the problem?
what exact changes i should do to solve this problem

Please check latest debug msgs after removing "OEMGetRealTime()"
--------------------------------------------------------------------------------



<> Record [ 115 ] dwRecAddr = 0x0, dwRecLen = 0x90001000
ImageStart = 0x90000000, ImageLength = 0x1B5D2F8, LaunchAddr = 0x90001000
Computing checksum: image start = 0x80000000, len = 0x1B5D2F8
Checksum = 0xABBBDC60 (0x1B5D2F8 bytes)

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x90000000 Length=0x1B5D2F8 Name="" Target=RAM
ROMHDR at Address 90000044h

Image Start: 90000000
Image Size: 01b5d2f8
Image Launch Addr: 90001000
Image ROMHDR: 819a3c38

Boot Device/Type: 2/1
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
AACDE Launch Windows Embedded CE by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at 22:35:41
ProcessorType=0926 Revision=5
OEMAddressTable = 90008c14
OEMInit: init.c built on Oct 25 2008 at 11:58:06.
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x881f
+OALArgsQuery(65)
WARN: Updating local copy of BSP_ARGS
-OALArgsQuery(pData = 0x9e09f838)
Intr Init done...
+OALTimerInit(1, 27000, 100)
+OALArgsQuery(4)
-OALArgsQuery(pData = 0x00000000)
OALTimerInit: g_oalTimerIrq = 0x00000020
-OALTimerInit..(rc = 1)
Timer Init done...
+OALDumpClocks
DM644x Current Clock configuration :
Reference Clock .... 27000000 Hz
PLL0 ............. 594000000 Hz
PLL0:SYSCLK1 ..... 594000000 Hz (DSP Subsystem)
PLL0:SYSCLK2 ..... 297000000 Hz (SCR, EDMA, core clocks for VPSS, EMIFA,
EMI
FB and others)
PLL0:SYSCLK3 ..... 198000000 Hz (I/O clock for EMIFA, CRC, ECC)
PLL0:SYSCLK4 ..... 148500000 Hz (I/O clock for EMIFB)
PLL0:SYSCLK5 ..... 99000000 Hz (Core clocks for various peripherals)
PLL0:SYSCLK6 ..... 0 Hz (Reserved (TI internal))
PLL0:SYSCLK7 ..... 0 Hz (VLYNQ I/O clock)
PLL0:SYSCLK8 ..... 0 Hz (Reserved (TI internal))
PLL0:SYSCLK9 ..... 0 Hz (DARtE, McASP0-3)
PLL0:AUXCLK ...... 27000000 Hz (Peripherals at 24 MHz)
PLL1 ............. 324000000 Hz
PLL1:SYSCLK1 ..... 27000000 Hz (ARM subsystem)
PLL1:SYSCLK2 ..... 162000000 Hz (ARM peripherals)
PLL1:SYSCLK3 ..... 324000000 Hz (I/O clocks for EMIFA, CRC, ECC)
PLL1:SYSCLK4 ..... 324000000 Hz (I/O clock for EMIFB)
PLL1:SYSCLK5 ..... 324000000 Hz (I/O clock for VPBE)
PLL1:SYSCLK6 ..... 0 Hz (Reserved (TI internal use))
PLL1:SYSCLK7 ..... 0 Hz (I/O clock for LCD)
PLL1:SYSCLK8 ..... 0 Hz (I/O clock for RTI2)
-OALDumpClocks
WARN: Updating local copy of BSP_ARGS
DeviceId................. DAVINCI-57087
pArgs->flags............. 0x14
pArgs->devLoc.IfcType.... 0
pArgs->devLoc.LogicalLoc. 0x1C80000
pArgs->devLoc.PhysicalLoc 0x0
pArgs->devLoc.Pin........ 0
pArgs->ip4address........ 1
pDevice->Name............ s
pDevice->ifcType......... 0
pDevice->id.............. 0x1C80000
pDevice->resource........ 0
pDevice->type............ 2
pDevice->pDriver......... 0x91B69000
WARN: OALKitlInit: KITL Disabled
OEMInit: KITL init done
-OEMInit
Setting up softlog at 0x93ffc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 91bb0350, pTOC = 919a3c38, pTOC->ulRamFree = 91d6d000, MemForPT =
000010
00

Old or invalid version stamp in kernel structures - starting clean!
OEMGetExtensionDRAM: Added 0x94000000 -> 0x97A80000
Configuring: Primary pages: 8840, Secondary pages: 14968, Filesystem pages =
119
04

Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 91d6f000, extension: 00005000, length: 02288000
[1] : start: 94000000, extension: 00008000, length: 03a78000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c0bd0000
g_pprcNK == 0x91badbc0
Updated eptr->e32_vsize to = 0001a000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 0001a000
Updated eptr->e32_vsize to = 000a8000
Updated eptr->e32_vsize to = 00019000
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
OSAXST0: Platform Name = DavinciEVM
OSAXST1: >>> Loading Module 'kd.dll' (0x97A5D87C) at address
0xC0010000-0xC00450
00 in Process 'NK.EXE' (0x91BADBC0)
KD: Starting kernel debugger software probe (KdStub) - KD API version 22
OSAXST1: >>> Loading Module 'NK.EXE' (0x91BADBC0) at address
0x90000000-0x9001A0
00 in Process 'NK.EXE' (0x91BADBC0)
Message Queue support initialized, g_hMsgQHeap = d0040770
OSAXST1: >>> Loading Module 'filesys.dll' (0x97A397C8) at address
0xC01F0000-0xC
0289000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x97A39910) at address
0xC01D0000-0xC
01E8000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x97A39A58) at address
0xC05E0000-0xC0
625000 in Process 'NK.EXE' (0x91BADBC0)
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM Trust
Mod
el
FileSystem Starting - starting with clean file system
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index
2FSDMGR!
MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr",
Mou
ntFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
OSAXST1: >>> Loading Module 'romfsd.dll' (0x97A22E1C) at address
0xC0290000-0xC0
297000 in Process 'NK.EXE' (0x91BADBC0)
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index
3FSDMGR!Mount
Table_t::RegisterVolume: Registered volume at index 3 (Name="ROM",
MountFlags=0x
71)FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FS: Creating signal event ReleaseFSD
FSREG: Unable to read value "Start DevMgr" under
HKEY_LOCAL_MACHINE\init\BootVar
s
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0,
RootKey=System\StorageManager\Aut
oLoad, FileSystem_t=ObjectStore
FILESYS: RAM File System FSD_MountDisk registering folder "Object Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index
4FSD
MGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="",
MountFl
ags=0x46)FILESYS: Starting boot phase 1.
FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=1,
RootKey=System\StorageManager\Aut
oLoad, FileSystem_t=Relfsd
OSAXST1: >>> Loading Module 'relfsd.dll' (0x979EA100) at address
0xC05A0000-0xC0
5AF000 in Process 'NK.EXE' (0x91BADBC0)
FILESYS: Waiting for bootable file system to be mounted.
FILESYS: Device started. Boot file system ready.
FSREG: Unable to read value "SystemHiveInitialSize" under
HKEY_LOCAL_MACHINE\ini
t\BootVars
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of system hive
FILESYS: Loading system hive from \Documents and Settings\system.hv.
+OALArgsQuery(64)
-OALArgsQuery(pData = 0x9e09f83c)
OEM: Cleaning system hive
FSREG: OEM forcing clean system hive!
FSREG: Mounting clean system hive
BuildPath: Documents and Settings
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap
FSREG: Taking down boot registry. Any open keys will be invalid.
FILESYS: Registry in place.
+OALArgsQuery(64)
-OALArgsQuery(pData = 0x9e09f83c)
OEM: Cleaning user profiles
FSREG: OEM forcing user hive cleanup!
FSREG: Unable to read value "RegistryFlags" under
HKEY_LOCAL_MACHINE\init\BootVa
rs
FSVOL: Using system database volume "\Documents and Settings\default.vol"
BuildPath: Documents and Settings
+OALArgsQuery(64)
WARN: Updating local copy of BSP_ARGS
-OALArgsQuery(pData = 0x9e09f83c)
OEM: Not cleaning system hive
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap
FSREG: Unable to read value "RequireCertMod" under
HKEY_LOCAL_MACHINE\init\BootV
ars
FSREG: Unable to read value "NoDefaultUser" under
HKEY_LOCAL_MACHINE\init\BootVa
rs
FSREG: Logging in default user.
FSREG: Unable to read value "DefaultUser" under
HKEY_LOCAL_MACHINE\init\BootVars
SetCurrentUser: Logging out (nobody), logging in default
BuildPath: Documents and Settings
BuildPath: Documents and Settings\default
FSREG: Mounting ROM portion of user hive
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
Mounting user hive from \Documents and Settings\default\user.hv
FSREG: Mounting clean user hive
FSVOL: Creating new volume (size=28672 bytes)
FSVOL: Initializing volume heap
FSREG: Unable to read value "RegistryFlags" under
HKEY_LOCAL_MACHINE\init\BootVa
rs
FSDMGR!STOREMGR_StartBootPhase BootPhase=2 (PrevBootPhase=1)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=2, LoadFlags=1

Initializing Database
DB:Validation: Name already exists DB_notify_events
DB:CeCreateDatabase failed
Filesystem initialized!
FILESYS: Waiting for kernel to be ready to launch apps
FSDMGR!PNPThread: Using PNPUnloadDelay of 4096
FSDMGR!PNPThread: PNPThread starting!
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=2, LoadFlags=2
InitMUI: Langs=409 0 0 0 0 0
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FS: Creating signal event ReleaseFSD
FS: Creating signal event system/events/notify/APIReady
FS: Creating signal event SYSTEM/ShellAPIReady
FILESYS: Launching apps
FILESYS: Launching shell.exe
OSAXST1: >>> Loading Module 'coredll.dll' (0x97A7E6CC) at address
0x40010000-0x4
011C000 in Process 'shell.exe' (0x97A39E90)
OSAXST1: >>> Loading Module 'shell.exe' (0x97A39E90) at address
0x00010000-0x000
26000 in Process 'shell.exe' (0x97A39E90)
OSAXST1: >>> Loading Module 'toolhelp.dll' (0x979A625C) at address
0x40170000-0x
40176000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'toolhelp.dll' (0x979A625C) at address
0x40170000-0x
40176000 in Process 'shell.exe' (0x97A39E90)
FILESYS: Launching device.dll
OSAXST1: >>> Loading Module 'device.dll' (0x979A6454) at address
0xC04E0000-0xC0
4E5000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'devmgr.dll' (0x979A659C) at address
0xC04F0000-0xC0
517000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'k.ceddk.dll' (0x979A66E4) at address
0xC0630000-0xC
063E000 in Process 'NK.EXE' (0x91BADBC0)
OSAXST1: >>> Loading Module 'pm.dll' (0x979A682C) at address
0xC0540000-0xC05670
00 in Process 'NK.EXE' (0x91BADBC0)
*** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x400002 ***
Filesys: Loaded device.dll
FILESYS: SignalStarted loop = 2
+InitDeviceFileSystems
FSDMGR!MountTable_t::RegisterVolumeName: Registered "$device" at index
5FSDMGR!M
ountTable_t::RegisterVolume: Registered volume at index 5 (Name="$device",
Mount
Flags=0x1)FSDMGR!MountTable_t::RegisterVolumeName: Registered "$bus" at
index 6F
SDMGR!MountTable_t::RegisterVolume: Registered volume at index 6
(Name="$bus", M
ountFlags=0x1)-InitDeviceFileSystems: status is 1
Ceddk!CalibrateStallCounter: Enter
Ceddk!CalibrateStallCounter: Could not find stall counter
Ceddk!BeginCalibration: min(27001) max(30001)
Ceddk!BeginCalibration: Elapsed is 29153
Ceddk!BeginCalibration: Delay is 15
DEVICE!DevloadInit
DEVICE!InitDevices: Root Key is Drivers\BuiltIn.
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix)
returned
2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix)
return
ed 2
OSAXST1: >>> Loading Module 'busenum.dll' (0x9799BC6C) at address
0xC0530000-0xC
053B000 in Process 'NK.EXE' (0x91BADBC0)
DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\NTLMSSP_SVC\BusPr
efix) returned 2
OSAXST1: >>> Loading Module 'coredll.dll' (0x97A7E6CC) at address
0x40010000-0x4
011C000 in Process 'udevice.exe' (0x9798509C)
OSAXST1: >>> Loading Module 'udevice.exe' (0x9798509C) at address
0x00010000-0x0
0019000 in Process 'udevice.exe' (0x9798509C)
udevice.exe $udevice_1001
FSDMGR!MountTable_t::RegisterVolumeName: Registered "$udevice_1001" at index
7AP
ISCreateAPIHandle: pvData == NULL
FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 7
(Name="$udevic
e_1001", MountFlags=0x101)


-------------------------------------------------------------------------------

thanks

Abraham Lincoln



"Vinoth" wrote:

can you remove the debug messages from OEMGetRealTime()?
--
vinoth.R ( MCTS Wince)
www.e-consystems.com



"abrahamlincolng" wrote:

Hi all,

i am porting Jacinto bsp to Davinci

After the image is downloaded into the target device, it starts to
boot up,
but it always halts during FSDMGR phase.


The following is portion of the debug msg:
----------------------------------------------------------------------------------------------------

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x90000000 Length=0x1997460 Name="" Target=RAM
ROMHDR at Address 90000044h

Image Start: 90000000
Image Size: 01997460
Image Launch Addr: 90001000
Image ROMHDR: 81995a98

Boot Device/Type: 2/1
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
AACDE Launch Windows Embedded CE by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at
22:35:41
ProcessorType=0926 Revision=5
OEMAddressTable = 90009054
OEMInit: init.c built on Oct 24 2008 at 15:21:18.
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xc85f
+OALArgsQuery(65)
WARN: Updating local copy of BSP_ARGS
-OALArgsQuery(pData = 0x9e09f838)
+OALInterruptInit
+OEMInterruptMapInit
-OEMInterruptMapInit
After the OalIntrMapInit function call
OALInterruptInit: EINT0=0x00000000 EINT1=0x0F000000
Register addresses: EINT0=0xA0448018 EINT1=0xA044801C
-OALInterruptInit(rc = 1)
Intr Init done...
+OALTimerInit(1, 27000, 100)
+OALArgsQuery(4)
-OALArgsQuery(pData = 0x00000000)
OALTimerInit: g_oalTimerIrq = 0x00000020
+OALIntrRequestSysIntr(1, 0x919a6230, 0x00000004)
-OALIntrRequestSysIntr(sysIntr = 16)
+OEMInterruptEnable(16, 0x0, 0)
g_oalSysIntr2Irq[sysIntr] = 919a6a10
sysIntr = 10
+OALIntrEnableIrqs(5, 0x00000020)
Inside for loop g_pIntcRegs->EINT0 = 0x0 g_pIntcRegs->EINT1 =0xf000000
Inside for loop INDEX = 0 IRQL = 32
Inside if loop irq <64
Inside for loop g_pIntcRegs->EINT0 = 0x0 g_pIntcRegs->EINT1 =0xf000001
Inside for loop INDEX = 1 IRQL = 4294967295
Inside for loop g_pIntcRegs->EINT0 = 0x0 g_pIntcRegs->EINT1 =0xf000001
Inside for loop INDEX = 2 IRQL = 4294967295
Inside for loop g_pIntcRegs->EINT0 = 0x0 g_pIntcRegs->EINT1 =0xf000001
Inside for loop INDEX = 3 IRQL = 4294967295
Inside for loop g_pIntcRegs->EINT0 = 0x0 g_pIntcRegs->EINT1 =0xf000001
Inside for loop INDEX = 4 IRQL = 4294967295
-OALIntrEnableIrqs(rc = 1)
-OEMInterruptEnable(rc = 1)
-OALTimerInit..(rc = 1)
Timer Init done...
+OALDumpClocks
DM644x Current Clock configuration :
Reference Clock .... 27000000 Hz
PLL0 ............. 594000000 Hz
PLL0:SYSCLK1 ..... 594000000 Hz (DSP Subsystem)
PLL0:SYSCLK2 ..... 297000000 Hz (SCR, EDMA, core clocks for VPSS,
EMIFA, EMI
FB and others)
PLL0:SYSCLK3 ..... 198000000 Hz (I/O clock for EMIFA, CRC, ECC)
PLL0:SYSCLK4 ..... 148500000 Hz (I/O clock for EMIFB)
PLL0:SYSCLK5 ..... 99000000 Hz (Core clocks for various
peripherals)
PLL0:SYSCLK6 ..... 0 Hz (Reserved (TI internal))
PLL0:SYSCLK7 ..... 0 Hz (VLYNQ I/O clock)
PLL0:SYSCLK8 ..... 0 Hz (Reserved (TI internal))
PLL0:SYSCLK9 ..... 0 Hz (DARtE, McASP0-3)
PLL0:AUXCLK ...... 27000000 Hz (Peripherals at 24 MHz)
PLL1 ............. 324000000 Hz
PLL1:SYSCLK1 ..... 27000000 Hz (ARM subsystem)
PLL1:SYSCLK2 ..... 162000000 Hz (ARM peripherals)
PLL1:SYSCLK3 ..... 324000000 Hz (I/O clocks for EMIFA, CRC, ECC)
PLL1:SYSCLK4 ..... 324000000 Hz (I/O clock for EMIFB)
PLL1:SYSCLK5 ..... 324000000 Hz (I/O clock for VPBE)
PLL1:SYSCLK6 ..... 0 Hz (Reserved (TI internal use))
PLL1:SYSCLK7 ..... 0 Hz (I/O clock for LCD)
PLL1:SYSCLK8 ..... 0 Hz (I/O clock for RTI2)
-OALDumpClocks
WARN: Updating local copy of BSP_ARGS
DeviceId................. DAVINCI-57087
pArgs->flags............. 0x14
pArgs->devLoc.IfcType.... 0
pArgs->devLoc.LogicalLoc. 0x1C80000
pArgs->devLoc.PhysicalLoc 0x0
pArgs->devLoc.Pin........ 0
pArgs->ip4address........ 1
pDevice->Name............ s
pDevice->ifcType......... 0
pDevice->id.............. 0x1C80000
pDevice->resource........ 0
pDevice->type............ 2
pDevice->pDriver......... 0x919A9000
WARN: OALKitlInit: KITL Disabled
OEMInit: KITL init done
-OEMInit
Setting up softlog at 0x93ffc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 919efc1c, pTOC = 91995a98, pTOC->ulRamFree = 919f4000,
MemForPT = 000010
00

Old or invalid version stamp in kernel structures - starting clean!
OEMGetExtensionDRAM: Added 0x94000000 -> 0x97A80000
Configuring: Primary pages: 9729, Secondary pages: 14968, Filesystem
pages = 123
48

Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 919f6000, extension: 00005000, length: 02601000
[1] : start: 94000000, extension: 00008000, length: 03a78000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c0c60000
g_pprcNK == 0x919edaa0
Updated eptr->e32_vsize to = 0001b000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 0001b000
Updated eptr->e32_vsize to = 000a2000
Updated eptr->e32_vsize to = 00019000
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.468)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.476)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.481)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.486)
PGPOOL: Reserved 768 pages for Loader pool
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.495)
PGPOOL: Reserved 256 pages for File pool
OSAXST0: Platform Name = DavinciEVM
OSAXST1: >>> Loading Module 'kd.dll' (0x97A5C87C) at address
0xC0010000-0xC00450
00 in Process 'NK.EXE' (0x919EDAA0)
KD: Starting kernel debugger software probe (KdStub) - KD API version
22
OSAXST1: >>> Loading Module 'NK.EXE' (0x919EDAA0) at address
0x90000000-0x9001B0
00 in Process 'NK.EXE' (0x919EDAA0)
Message Queue support initialized, g_hMsgQHeap = d0040770
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.572)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.578)
OSAXST1: >>> Loading Module 'filesys.dll' (0x97A387C8) at address
0xC01F0000-0xC
0289000 in Process 'NK.EXE' (0x919EDAA0)
OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x97A38910) at address
0xC01D0000-0xC
01E8000 in Process 'NK.EXE' (0x919EDAA0)
OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x97A38A58) at address
0xC0690000-0xC0
6D5000 in Process 'NK.EXE' (0x919EDAA0)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.655)
FSDMGR!DllMain: DLL_PROCESS_ATTACH
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.663)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2003/1/1 12:0:0.669)
CertMod.dll not found, using old OEM Trust Model
FileSystem Starting - starting with clean file system
+OEMSetRealTime(2006/1/1 12:0:0.000)
-OEMSetRealTime(rc = 1)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.722)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.730)
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at
index 2FSDMGR!
MountTable_t::RegisterVolume: Registered volume at index 2
(Name="StoreMgr", Mou
ntFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
OSAXST1: >>> Loading Module 'romfsd.dll' (0x97A21E1C) at address
0xC0290000-0xC0
297000 in Process 'NK.EXE' (0x919EDAA0)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.775)
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index
3FSDMGR!Mount
Table_t::RegisterVolume: Registered volume at index 3 (Name="ROM",
MountFlags=0x
71)+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.799)
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FS: Creating signal event ReleaseFSD
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE
\init\BootVar
s
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.925)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System
\StorageManager\Aut
oLoad, FileSystem_t=ObjectStore
FILESYS: RAM File System FSD_MountDisk registering folder "Object
Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at
index 4FSD
MGR!MountTable_t::RegisterVolume: Registered volume at index 4
(Name="", MountFl
ags=0x46)+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.972)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:0.977)
FILESYS: Starting boot phase 1.
FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=1, RootKey=System
\StorageManager\Aut
oLoad, FileSystem_t=Relfsd
OSAXST1: >>> Loading Module 'relfsd.dll' (0x979E7100) at address
0xC0600000-0xC0
60F000 in Process 'NK.EXE' (0x919EDAA0)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.034)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.041)
FILESYS: Waiting for bootable file system to be mounted.
FILESYS: Device started. Boot file system ready.
FSREG: Unable to read value "SystemHiveInitialSize" under
HKEY_LOCAL_MACHINE\ini
t\BootVars
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of system hive
FILESYS: Loading system hive from \Documents and Settings\system.hv.
+OALArgsQuery(64)
-OALArgsQuery(pData = 0x9e09f83c)
OEM: Cleaning system hive
FSREG: OEM forcing clean system hive!
FSREG: Mounting clean system hive
BuildPath: Documents and Settings
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.103)
FSVOL: Creating new volume (size=28672 bytes)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.114)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.120)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.126)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.132)
FSVOL: Initializing volume heap
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.163)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.169)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.174)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.180)
+OEMGetRealTime
-OEMGetRealTime(rc = 1 2006/1/1 12:0:1.185)
+OEMGetRealTime
.



Relevant Pages

  • RE: Kernel hangs while loading udevice.exe
    ... Boot Device/Type: 2/1 ... FSVOL: Volume heap already initialized ... FSREG: Mounted ROM portion of boot registry ... FILESYS: Waiting for bootable file system to be mounted. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: IXP42X NOR FileSystem Problem !!! wince5
    ... seems like the registry might not be valid, ... FSVOL: Volume heap already initialized ... FSREG: Mounted ROM portion of boot registry ... FILESYS: Starting boot phase 0. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Persistence in Hive Based Registry
    ... FILESYS: Waiting for bootable file system to be mounted. ... FSVOL: Volume heap already initialized ... FSREG: Mounted ROM portion of system hive ... FSVOL: Initializing volume heap ...
    (microsoft.public.windowsce.app.development)
  • Re: HIVE registry in RAM under CE6
    ... the filesys to mount hive registry from external file system? ... FSREG: ... FSVOL: Volume heap already initialized ...
    (microsoft.public.windowsce.platbuilder)
  • HIVE registry in RAM under CE6
    ... I am working on Windows CE 6 and I am trying to enable HIVE registry in RAM: ... FSREG: ... FSVOL: Volume heap already initialized ... FILESYS: Starting boot phase 0. ...
    (microsoft.public.windowsce.platbuilder)