Re: Realtime performance with AMD Geode LX 800 and CE 5.0

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

The question is not too difficult, *if* you have hardware to test and a BSP. Your question is so specific to hardware it is impossible to give a generic answer to your question, besides: Windows CE *is* a hard realtime operating system, but depending on the priority levels, cpu load, device drivers etc the jitter/latencies can be more or less than what you may expect. The definition of real-time in a CE context is "deterministic ISR and IST latencies", and this still holds in your case.


Good luck,

Michel Verhagen, eMVP
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Gian Piero Gasperini wrote:
Panino ha scritto:
No ideas at all?

question too difficult :-(
.

Relevant Pages

  • Re: Lost in confusion with IP Access...
    ... your own hardware and software! ... Does a network icon appear for the built-in Ethernet ... Via has released a BSP for the unit to be setup with Windows CE. ... I can't disable the LAN from BIOS, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Windows CE 5.0 Verification and Validation Testing
    ... that, although that particular Mainstone BSP might be tested, you'd never ... hardware interfacing. ... I suppose that Microsoft might be able to certify that certain board ... Windows CE 5.0 in such an environment. ...
    (microsoft.public.windowsce.embedded)
  • Re: Need Advice for creating WinCE Images with PlatformBuilder
    ... hardware, and that experience has been invaluable in doing BSP ... But the training classes are still ... create windows CE 6.0 images for various hardware products that we have. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Windows CE.NET 4.2 Image for VIA Motherboard-Have A Look
    ... the right BSP, you won't be able to have something runnable in one week, ... Guiding you in all the steps from the beginning till having your platform up ... I am wondering how can we configure a hardware? ... >> "Vinay Satishchandra Trivedi" ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Board Support Packages
    ... What are board support packages?are they similar to BIOS,since they ... act like a bridge between OS and hardware? ... board startup code and device drivers. ... interface to talk to the devices, configure the system to start the BSP ...
    (comp.arch.embedded)