Windows CE Screen Configuration

I am new with Windows CE and I have problems to start with the proper
configuration. I install Windows CE in my embedded module using the Builder
5.0. I use the command:


loadcepc /L:800x600x16:800x600 nk.bin (I am not using Ethernet or
serial communication)


The first time it starts properly and everything works but after rebooting
the configuration is lost and the system does not start again. Then I have to
start again from my USB. If I use an incorrect configuration size 320x200 for
example, it starts again, but with this false configuration.


I use also the file provided by the vendor, Kontron EM, before exec the
loadcepc, this file is jsysce. But this does not work at all, it is the same
if I execute this file or not. The OS that I try to install is a clon of the
BSP provided by Kontron.


I execute the command VESATEST.EXE provided by the platform builder I obtain
a lot of configurations that do not work in my system really.

Can anybody help me?


Thank you in advance,


Miguel A.
.

Relevant Pages

  • Re: home network behind NAT and firewall ?
    ... > and then it's not all ports, just the specific ports that are necessary - ... proper classes and assign computers to classes. ... There are always tons of possible misconfigurations. ... But for normal proper configuration there is no difference: ...
    (comp.security.firewalls)
  • Re: getting dialup networking to work on FC4
    ... > The modemlights utility didn't work because it wanted to bring up a ppp0 ... and that's not how neat created the configuration (it named ... And is there some other proper way to enable IP ... naming the ppp connection with the name of the ppp service is ...
    (Fedora)
  • getting dialup networking to work on FC4
    ... The modemlights utility didn't work because it wanted to bring up a ppp0 ... and that's not how neat created the configuration (it named ... Is there some proper way to get /dev/modem set properly, ...
    (Fedora)
  • Re: Strange device init
    ... >>The device doesn't get its resources configured properly. ... On other laptops the configuration is done via ... Finally have you checked if PnPBIOS detects the device? ... _PRS and _CRS at least returns the proper resources that should be used. ...
    (Linux-Kernel)
  • Re: ADSL Router - PPP Half Bridge mode background info & Help!
    ... [Planet 3000 ADSL Router to be configured as a Bridge] ... >> also use the proper encapsulation for this interface ... >> for the PPPoE interface. ... >> configuration screens of your modem, ...
    (comp.os.linux.networking)