Using the debug zones with a SD Client Driver

Hi everybody.

I'm developing an SDIO and its client driver in the Win CE 5.0.

I would like to know if it is possible for me to use the Win CE debug
zones to see all the communication between the SDIO and my PDA Dell
Axim x50v with Windows Mobile 6 where I have copied my SD client
driver.

Thanks

Regards,
Guilherme Kami
.

Relevant Pages

  • Re: Using the debug zones with a SD Client Driver
    ... this would dump the debug messages corresponding the flags ... I'm developing an SDIO and its client driver in the Win CE 5.0. ...
    (microsoft.public.windowsce.platbuilder)
  • SDIO ISR
    ... I'm developing SDIO Client Driver, by using, as reference, the ... I have a problem with SDIO ISR. ... When an SDIO Interrupt comes, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: BT Client Card using SDIO mode
    ... the BT configuration in the ... control panel shows that "no hardware present". ... Do I need a seperate client driver for this SDIO BT card? ...
    (microsoft.public.windowsce.platbuilder)
  • BT Client Card using SDIO mode
    ... I have got one Toshiba BT2 SDIO card. ... the BT configuration in the ... Do I need a seperate client driver for this SDIO BT card? ...
    (microsoft.public.windowsce.platbuilder)
  • Re: For Public Interest: HPs new line of iPAQs
    ... I suspect it will be lower than add-in SDIO cameras. ... >° Windows Mobile 2003 SE ... >° 3.5mm Stereo Headphone Jack for MP3 Stereo Sound Output ... >° USB Cable ...
    (microsoft.public.pocketpc)