Use External USB GSM/GPRS Modem in Mobile CE 6.0

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hi all,
I have a eBox2300, Vortex_86 CPU and it has 3 USB ports and i have Telit GM862 GSM/GPRS modem. Modem has a own housing and i connect it with USB port to XP and it is working well.
So,in The Platform Builder i chose CoreCell and i set up IMGENFORA =1.
I am building my project and Attached Device then WinCE 6.0 lunching there is no problem but when i plug in the modem on USB port it says Give Driver name of USB device.
And then i detached device and stop debugging
under C:\WINCE600\PLATFORM i create \Telit GM862-GPRS\Drivers then
i put XP drivers of Modem to this folder C:\WINCE600\PLATFORM\Telit GM862-GPRS\Drivers

i have just two inf files of this modem
telit.inf
gprs.inf

then i build again atached device it is same

same message again appear it say Give dirver name of USB device

Where is my fault.
can you give some explanation. if i want to use Third Party Device like this how can i use on my Mobile Embedded 6.0

thank you for your advices.

hasan.
.

Relevant Pages

  • Re: US Robotics 56k USB Faxmodem
    ... Is your modem powered by the USB port? ... |>| The modem works fine on my Dell Dimension 8200 running ... |>| which is also running Windows XP Pro (a clean install) ...
    (microsoft.public.windowsxp.general)
  • Re: Seeking a Simple USB Device That Can be Controlled via FM8
    ... Sorry, I wasn't saying he couldn't control a light, merely that he was not actually sending anything to the USB port when he prints. ... While you could communicate directly with parallel printers in the old days, there is no longer much interaction between end user software and hardware. ... The operating system receives the data and passes it through the hardware abstraction layer to the device. ... Despite what you see in the printer selection window, the program itself has no idea whether you are printing to a USB printer, or a file, or a modem. ...
    (comp.databases.filemaker)
  • Dial-Up Connection?
    ... Recently I installed a modem for a dial-up ... telephone to a USB port in my CPU. ... modem & creating a new dial-up connection, when I try to connect to the ... port in my CPU to which I connected the cable from the telephone. ...
    (microsoft.public.win2000.networking)
  • Missing standard XP Modem Drivers
    ... >Do you have XP drivers for your modem? ... Modem" driver that is included with XP. ... phone is connected to a USB port that uses a Serial-to- ... some simple way to restore Microsoft's Standard Modem ...
    (microsoft.public.windowsxp.basics)
  • Re: How to -- PPPoE with my ADSL Connection to connect internet with CentOS 5
    ... from USB port or RJ-45 LAN port. ... you only need to conf pppoe or pppoa protocols if you have a simple adsl ... modem that connects to a usb port or if the modem is internal. ...
    (comp.os.linux.setup)