Re: RTL 8139

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

So, you're NOT using the RTL adapter as an ordinary Ethernet adapter, but as
a KITL-over-Ethernet connection to your Platform Builder machine? It
appears that this is the case. If so, you *CAN'T* also use the adapter
driver; that won't work because you'll have both the kernel and the driver
trying to talk to the hardware. You can a) use VMini and leave the KITL
stuff or, b) change the BSP so that it's not using KITL-over-Ethernet and
use the real RTL driver. How, exactly, you do b), is BSP-specific, so I'll
have to leave that to you. If you want to do a), remove the RTL driver from
the OS and make sure that you've followed the instructions in Ethernet
Debugging Services in the help to turn on VMini.

Paul T.

<ashsantu@xxxxxxxxx> wrote in message
news:13059dc4-9fbc-49a0-ad08-175d74447de9@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Pls check following debug message pls give me the solution
SysInit: GDTBase=8118d0e8 IDTBase=811deec0
KData=811fd800
Windows CE Kernel for i486 Built on Jun 24 2004 at
18:23:42
g_pPageDir = 81200000
InitKitlNIC: Searching for PCI Ethernet NIC
(dwIrq = 0,
dwI
oBase = 0, dwDfltType = 0) ...
InitKitlNIC: Found PCI Ethernet NIC (type = 4, IRQ=11,
IOBase=0x1000).
RTL8139InitDMABuffer():: Start[0x811E2B40]-[0x811E2B40] -
Size[0x10000]
[0x0]
Tx[0x811E2B40] - Rx[0x811E4340] - RxLength[0x8000] -
RxLengthBit[0x1000]tRx[0x2117FF] [0x77400700] RCR
[0x181A] TCTR [0xA99ED
RTL8139:: built on [Apr 25 2008]
[14:47:12]
RTL8139Init():: BaseIO[0x1000] : MemOffset[0x1000]
RTL8139Init:: MAC = 00-08-A1-45-A6-77
RTL8139Init():: TxBuff[0x811E2B40] - RxBuff[0x811E4340] -
LastRx[0x811EC33F][0x10] CONFIG1
[0x8D]
RTL8139Init:: MAC = 00-18-4D-6F-24-3FTL8139HWSetMCRegs():: Set all to
0x00
RTL8139 ethdbg library: perform auto negotiate.
M
+RTL8139EnableInts().. [0xE5] MULI
RTL8139:: RTL8139HWSetMCRegs():: Set all to
0x00L8139EnableInts()..D [0x10]
VBridge:: built on [Apr 25 2008] time [14:47:14]
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0xA11F2CE0] to [0xA11F6CE0].
Rx buffer [0xA11F6D00] to [0xA11FAD00].
VBridge:: NK add MAC: [0-18-4D-6F-24-3F]
ERROR: OALKitlInit: KitlInit failed
RTC - Status Reg B - 0x02
X86Init done, OEMAddressTable = 80229378.
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
VBridge:: VB_INITIALIZED returns [1]
VBridge:: RESET_BUFFER received.
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions
at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
DeviceFolder::LoadDevice!
Enumerate Fou
nd deprecated load instructions at (Drivers\BuiltIn\PPP). Driver
cannot be unloa
ded.
PCIbus!PCIEnum: WARNING: Resource request for device 0:0:0 failed
Lyg.p: Layout Manager successfully initialized to 1
Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [VMINI1]
NDISPWR:: Found adapter [PCI\RTL81391]


.

Relevant Pages

  • Re: issues running release image without KITL
    ... Do you have a driver for your Ethernet chip or adapter installed in the OS? ... into VMini and used only when there is a KITL connection back to the Platform ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ce 5.0 usb/fast ethernet adapter
    ... I know the fast ethernet ... adapter was ordered and delivered but I don't think it has been tried out. ... to is very likely compatable with the native rndis driver in ce 5.0, ... interest is rndis. ...
    (microsoft.public.windowsce.embedded)
  • if_aue panic: trying to sleep while sleeping is prohibited
    ... I got the following panic when I tried plugging in a USB 10/100 Ethernet ... adapter driver). ... Ed Maste, Sandvine Incorporated ...
    (freebsd-current)
  • PATCH: docs for updated sk98 from vendor
    ... +Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX ... the driver is integrated in the linux kernel source. ... both link partners are allowed to send PAUSE frames ...
    (Linux-Kernel)
  • Re: [RFC][PATCH] SPI subsystem
    ... Are you expecting the adapter ... > driver to handle the fact that its transfer routine could be called ... > a message or another CS line which is really a GPO pin used for register ... For example a char LCD with SPI interface ...
    (Linux-Kernel)