Re: WLAN connection

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

On Apr 4, 9:15 pm, Ming Wang <wange...@xxxxxxxxx> wrote:
On Apr 4, 9:13 am, "Silver" <moc.liamtoh@gnirrevliseht> wrote:

The problem is not the linksys router, I use them frequently with CE,
WinMobile, Linux, XP and Vista.
I am guessing that you have messed up the configuration on either the router
or WZC but you give us no clues about what you have done, what your setup it
etc....

Geoff
--

Are you sure that the router doesn't have MAC filtering enabled? Even
when the filtering is enabled, the network will appear as an unsecured
network (assuming you don't have WPA or WEP enabled). If the wireless
card's MAC is not in the router's filter list then the card will not
be allowed to connect to the network.

Regards,
Ming Wang

Yes, i m sure that MAC filtering is not enabled.
I guess there is problem with my calibration data.
I am double checking it.

And also, still i cannot able to disable WLAN in boot up.
with my first boot every time WLAN is enbled by default, here i want
to disable it by default,
user have to enable from wireless manager.

Thank you very much.

Regards,
kumar
.

Relevant Pages

  • Re: Need to add access point
    ... I was hoping to set up the second router/AP to match the network settings ... her laptop is looking for doing MAC filtering on it to her laptop's network ... wireless contrivance into a simulated office enironment. ... buy another wireless router or access point and you're done. ...
    (alt.internet.wireless)
  • Re: Securing and unsecured network
    ... I have a Netgear 834GT router operating on Windows XP Pro op system. ... I also see my Netgear network but it is unsecured. ... MAC filtering isn't the most secure method, but really, for a home ...
    (alt.internet.wireless)
  • Re: 2nd linksys WAP54G wireless access point?
    ... that linksys/cisco wap54g only has a table to enter 50 address. ... neat with only the need to run a single network cable to it. ... the network server or network router performs the task of a dhcp server. ...
    (alt.sys.pc-clone.dell)
  • Re: Router.
    ... Give your network a SSID ... Switch off SSID radio broad cast if possible (means you'll have to type it in ... Set up MAC filtering to allow entered MAC addresses. ... Change the default password to login to your router. ...
    (microsoft.public.windowsxp.general)
  • ~~~~~~~~~~~~~~ IP ADDRESS ~~~~~~~~~~~~~~
    ... block my ip address vista windows ... change public ip address linksys router ... setting up a network ip address ... warcraft server ip address ...
    (sci.misc)