Re: Dynamic display resolution change in CE 6.0

Tech-Archive recommends: Speed Up your PC by fixing your registry

Danny,forget the display driver.You can do it in bootloader if your
platform has one.Then you can chang screen resolution dynamically in
it.You can store lcd infomation in g_ebootCFG and init LCD controller
in bootloader.What you have to do in dispaly driver is getting the LCD
information(just LCD_XSIZE and LCD_YSIZE).You even needn't init LCD
controller in display driver since you have it done in bootloader.

Good luck.
.

Relevant Pages

  • Re: SVGA, LCD, Win CE 6.0 and PB
    ... site addressing display drver issues, not to mention the source code. ... can you tell me how the resolution ... travel down thru Win CE from boot.ini to the place genrating final LCD ...
    (microsoft.public.windowsce.platbuilder)
  • LCD TV as a PC monitor - any practical hints?
    ... LCD TV, or a "public display" LCD for an even higher price (with ... I don't see much need for higher resolutions - those ... At just the right resolution, the pixels tend ...
    (comp.sys.ibm.pc.hardware.video)
  • Re: SVGA, LCD, Win CE 6.0 and PB
    ... LCD = Windows CE desktop size. ... I can have a desktop larger than physical screen window. ... display. ... I've got full 800 pixel wide desktop image when I run Win XP on ...
    (microsoft.public.windowsce.platbuilder)
  • Re: [OT?] Refresh rates for LCD screens?
    ... >My model for CRT displays has a display processor scanning through ... In the case of LCD screens, there is local memory *in the LCD ... controller* to remember the state of every pixel in the screen. ... LCD controller, and then driving the LCD panel itself. ...
    (sci.image.processing)
  • Re: A black strip on right side of LCD
    ... But My CRT shows the image correctly and I drive a CRT ... I've got the datasheet from LCD vendor. ... HSync action happens at the falling edge exactly, the Win XP signals should ... I found an artical talked about display driver briefly. ...
    (microsoft.public.windowsce.platbuilder)