Problem with SiliconDrive 1GB Compact Flash.

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: "ravip" <ajravi2000@xxxxxxxxxxxxxxxx>
Date: Fri, 14 Mar 2008 01:25:40 -0500

Hi,

We are building WinCE 4.2 Os image for ETX233 single board computer from
AdLink. We tried to boot the device with SanDisk 128MB/256MB/512MB. And it
seems to be working and booting pretty fastly. But when we tried to use
SiliconDrive 1GB compact flash, it is taking nearly 15 minutes to boot. We
made all proper BIOS settings(LBA mode,etc). Does any face similiar kind of
issue ?

Could somebody help us in this regards?

Thanks in Advance,
Ravindran Ramaraj.

--
Message posted using http://www.talkaboutsoftware.com/group/microsoft.public.windowsce.platbuilder/
More information at http://www.talkaboutsoftware.com/faq.html

.

Prev by Date: Data abort in the same function every tim
Next by Date: Re: Get "Bad subdirectory" build error when specifying a non-subdirectory in DIRS
Previous by thread: Data abort in the same function every tim
Next by thread: CE 6.0 CETK: Storage Device Block Driver Performance Text[Complete
Index(es):
- Date
- Thread

Relevant Pages

Re: "disk read error"
... Re my previous post on resolving the boot problem with the Sandisk 5000, ... When I ran mbrfix with the fixmbr command, ... the CF card does indeed successfully boot. ...
(microsoft.public.windowsxp.embedded)
Re: Problem booting from 512MB SanDisk
... I emailed directly to their support, many times, and asked for the tool. ... you will need to sign an NDA in order to get the tool from SanDisk. ... Basicaly boot.ini problem is related with upper partition limit written ... wont boot on the 512MB SanDisk. ...
(microsoft.public.windowsxp.embedded)
USB adn SCSI Device Numbering
... I just added an Adaptec USB2 PCI card. ... If I boot with my Sandisk CF ...
(freebsd-questions)
Only from mobile rack, PIO 0, NoDMA? Help?
... First of all, I use SanDisk CF 256, Athens, so supports DMA. ... What the problem was: I couldn't boot either DOS or XPe from my CF: ... After setting PIO 0 and UDMA off in BIOS, ...
(microsoft.public.windowsxp.embedded)
CF card: Only from mobile rack, PIO 0, NoDMA? Help?
... First of all, I use SanDisk CF 256, Athens, so supports DMA. ... What the problem was: I couldn't boot either DOS or XPe from my CF: ... After setting PIO 0 and UDMA off in BIOS, ...
(comp.arch.embedded)