Wince500 Com Ports

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I have ported our wince420 BSP to Wince500 and now find that when I try to
open com ports it does not allow me to do so I get a dialog box telling me
that the port is not available: another program maybe be using it. I have
made sure that serial debugging is off and have winceship ticked. We have a
number of com ports on our hardware, some are being used but two that are
free are com1 and com8 and both fail to open.

Regards


.

Relevant Pages

  • Re: Plan to build a CE6 Boot loader for S3C2440 platform
    ... I'll begin to port the CE 5.0 boot loader to CE 6.0. ... Bruce.Eitman AT EuroTech DOT com ... plan to impelement a boot loader following the CE 6.0 BSP framework. ... Screen, COM ports, USB ports, Ethernet, Audio, Cam, IrDA, JTag interfaces ...
    (microsoft.public.windowsce.embedded)
  • Re: WM5 MS BT Stack
    ... is this BSP thing a WM5 only? ... > Peter is exactly right. ... the Windows Mobile UI allows you to ... > configure COM ports 0 to 9 by default. ...
    (microsoft.public.pocketpc.developer)
  • Re: Problems with 6 Serial Port in ICOP VDX-6327
    ... I'm testing all ports with an ICOP application; ... BSP, I set all this in BIOS. ... The BSP registry entries for serial ports IRQ and I/O must match those ...
    (microsoft.public.windowsce.platbuilder)
  • COMM Ports on Windows Mobile 2003 Second Edition
    ... When I run the test with Bluetooth enabled, ports COM2 and COM4 fail. ... If port COM5 and COM8 are Bluetooth and Bluetooth is disabled, ...
    (microsoft.public.pocketpc.developer)
  • Re: Odd Serial Port Problem
    ... so all the ports are on the ISA bus. ... the pc486 BSP automatically configures IRQ7 to a stray ... It looks like pc486 assumes IRQ9 is the second ATA port instead of IRQ15. ...
    (comp.os.vxworks)