SD Driver in Wince 5.0 CMD6 not issues

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Rishabh Kumar Goel <rishabhgoel@xxxxxxxxx>
Date: Wed, 16 Jan 2008 05:09:13 -0800 (PST)

Hi,

I am developing the host controller driver for SD Host Controller.
Although everthing seems to work fine but i have 1 doubt.

When i plug in SD Memory Card, the controller interface is set to
25Mhz, 4Bit mode. But the call for CMD6 does not come from the SD Bus
Driver Stack (i.e. for switching the Card interface to high speed
mode).

I am using SDBus2.dll.

I checked out the SDBus code in the wince500\public\common\oak\drivers
\sdcard\sdbus: But it is all confusing.

Please help.

Regards,
Rishabh Kumar Goel
.

Follow-Ups:
- RE: SD Driver in Wince 5.0 CMD6 not issues
  - From: Muiz
- RE: SD Driver in Wince 5.0 CMD6 not issues
  - From: Luca Calligaris

Prev by Date: Re: Correct settings to use 256Mb ram with 32Mb Video memory on x86 GE
Next by Date: Re: Correct settings to use 256Mb ram with 32Mb Video memory on x86 GE
Previous by thread: Re: How to support CE-ATA device in WINCE
Next by thread: RE: SD Driver in Wince 5.0 CMD6 not issues
Index(es):
- Date
- Thread

Relevant Pages

Re: Virtual USB Host Controller Interface Driver
... host controller and how to insert a host controller in the present ... "Filter USB Host Controller Driver" will be really helpful to start ... Now I am reverse engineering the host controller driver files with the ... aim of finding some functionality hints from the dissassembled code. ...
(microsoft.public.development.device.drivers)
Microsoft USB Stack fails with SanDisks U3 technolgy enabled Pendrives
... We have developed a USB Host Controller driver for TI's DaVinCi ... SanDisk Pendrive which we used was having some technology called U3 ... there any chance that becouse of these SCSI commands can fail. ...
(microsoft.public.windowsce.platbuilder)
Re: USB HOST CONTROLLER SUPPORT FOR RNDIS DEVICE (USR5421)
... RNDIS device requires a very solid implementation on Host Controller Driver, ... is RNDIS heavily use the Control Endpoint. ...
(microsoft.public.windowsce.platbuilder)
Re: Virtual USB Host Controller Interface Driver
... I have to write a virtual USB Host Controller Driver. ... Thanking You ...
(microsoft.public.development.device.drivers)
RE: SD Driver in Wince 5.0 CMD6 not issues
... "Rishabh Kumar Goel" wrote: ... I am developing the host controller driver for SD Host Controller. ... When i plug in SD Memory Card, the controller interface is set to ...
(microsoft.public.windowsce.platbuilder)