Re: Platform Builder Ignoring BOOTME message

Are the PC and the device on the same subnet?

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

"Roger Williamson" <RogerWilliamson@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:18481C08-20D4-4B38-8836-B13CE472181C@xxxxxxxxxxxxxxxx
Hmm... I know that my firewall is turned off completely with regard to
that
port, so that can't be the answer.

My debug port just asserts that the uboot is shooting out the packets
every
second(all of which look like the packet I first posted)

Honestly, I'm not even booted into WCE yet, that is the UBOOT sending out
those packets, and waiting for the runtime image to be uploaded into it.

"ige" wrote:

Is the name of the device visible in the list of detected devices? If
yes, then PB is able to receive the BOOTME packets.
Probably there is error after that.

Also see the debug message on your device (which are sent out of the
debug Serial port).

On Sep 13, 2:08 pm, "Karel Danihelka"
<Karel.Danihe...@xxxxxxxxxxxxxxxxxxxx> wrote:
I would suggest look to firewall settings on host machine. It looks
like
firewall blocks BOOTME packets from PB and/or reply to them.

Karel Danihelka
--
Kar...@xxxxxxxxxxxxxxxxxxxx (remove "online" from reply-to address)
This posting is provided "AS IS" with no warranties, and confers no
rights.



.

Relevant Pages

  • Re: What is going on with my Dialup?
    ... also forward it to an unused port, and have that port provide the ... verses the RST or ICMP 3,3. ... The lack of response causes the remote computer to make ... Others think that by not responding to unwanted packets, ...
    (comp.os.linux.networking)
  • Re: OT .. Road Warrior communications question
    ... The data on the Internet is sent in little packets. ... The packets addressed to port 80 ... Likewise, at the mail server receiving the packets, it knows the return ... Why would e-mail work on the web but not from your e-mail software? ...
    (alt.guitar.bass)
  • Re: Logs: Many hits with source port of 80
    ... The hits from source port 80 to dest port 37852 are IMHO almost ... you should probably see a couple other packets - perhaps ... packets if either you send the load balancer a packet, ... >>I have seen similar hits for the past three months. ...
    (Incidents)
  • RE: Cisco IOS exploit (44020)
    ... various protocols and sends 19 packets ... Cisco IOS device and is the TTL subtracted by 255. ... DEBUG: Protocol: 53 ...
    (Bugtraq)
  • RE: Cisco IOS exploit (44020)
    ... Subject: Cisco IOS exploit ... various protocols and sends 19 packets ... DEBUG: Protocol: 53 ...
    (Bugtraq)