Re: USB boot, RNDIS issue, can't download image,How to install NAT

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hello,
If I remove the default gateway for local area connection 6, the result is
not change.
and I have not activesync device in my pc.
My target board is 192.168.0.2

and, my target board mac is E2-A4-4D-56-72-89.
local area connection 6, mac is same. E2-A4-4D-56-72-89

Thank you very much.

"mobilevil" wrote:

some thought
you don't need a default gateway for local area connection 6,
if you have a activesync device plugged in, remove it.
the ip of the target board is 192.168.0.x right?

"How to install NAT table on my ethernet?"
<HowtoinstallNATtableonmyethernet@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:4F80EBDA-87CE-4074-B220-19C97B942BC9@xxxxxxxxxxxxxxxx
Hello, mobilevil
I do use different subnet.

Ethernet adapter Local Area Connection:

IP Address. . . . . . . . . . . . : 10.193.102.86
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.193.102.254

Ethernet adapter Local Area Connection 6:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

"mobilevil" wrote:

nonono
after plugging in, your pc has a new interface.
maybe you have a 100m ethernet for company network, and you will have a
USB
networking device for your target board
use different subnet for your company network and usb network is better.

"How to install NAT table on my ethernet?"
<HowtoinstallNATtableonmyethernet@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:90000137-2FC8-4BD8-B1C4-89F82F2CD135@xxxxxxxxxxxxxxxx
Hi,
My device plug directly to my PB machine. and configure the RNDIS
network
use static IP.
my board addr: 192.168.0.2, submask: 255.255.255.0
my pc addr for RNDIS : 192.168.0.4, submask: 255.255.255.0


"mobilevil" wrote:

if your platform builder is in another computer, use windows internet
share.
if your device plug directly to your platform builder machine, you
need
to
config a ip address for the usb network interface.
you may see it as local area network 2 or so.

"How to install NAT table on my ethernet?"
<HowtoinstallNATtableonmyethernet@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:BC9444C2-E2FF-41AB-B54A-DE3781CB6D8D@xxxxxxxxxxxxxxxx
Hello,

software: wince5.

Hi. My eboot uses USB RNDIS to download the OS image into the
target.
The
initialization works, as you can see from the following output:


Enter your selection: d
INFO: Trying to initialize USB RNDIS.
HostMiniInit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: PDDInit Success!
Rndis:: Get MAC address F0F2,F200,20
Rndis:: Waiting some time for ISR:
RndisMdd:: PDD's max RX buffer = [8192] bytes.

Rndis:: initialization: Success
HostMini:: New filter set: [0x0] --> [0x20]

HostMini:: New filter set: [0x20] --> [0x0]

HostMini:: New filter set: [0x0] --> [0xB]

HostMini:: New filter set: [0xB] --> [0x0]

HostMini:: New filter set: [0x0] --> [0xB]

HostMini:: New filter set: [0xB] --> [0x2B]

HostMini:: New filter set: [0x2B] --> [0xB]

HostMini:: New filter set: [0xB] --> [0x2B]

INFO: MAC address: F2-F0-0-F2-20-0
System ready!
Preparing for download...
+OEMPreDownload()
INFO: Using device name: 'MAINSTN8192'
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

The problem is the following: I am not able to download the image
via
Platform Builder, that is, when i click on Attach Device and the
download
dialog appears, nothing happens. What can I do?

By the sniffing of the netork interface used to connect PC and
target I
can
see:
- target sends broadcast packet on UDP (srcport 980 dstport 980)
- host replys with UDC packet (srcport 1853 dstport 980)
The funny thing is that I tried 3 other pc, and only one (it is not
mine
so
i do not know its configuratiuon) works.Any idea?

I heard someone had resolve this problem: it was necessary to
install a
NAT
table on my ethernet nic.

How to install NAT table on nic?

Thankyou very much!

Albert
Freescale









.