[WinCE 5.0] DST don't work ?
- From: oVo <olivier.vigliengo@xxxxxx>
- Date: Mon, 18 Jun 2007 01:06:26 -0700
Hi,
With PB 5.0 on a PhyCore PXA-270 (BSP from Adeneo), I try to put on
DST ('Paris' time zone).
I have installed all the QFE for Wince 5.0 and added the 'SNTP Client
with DST' component to my image.
In my 'Project.reg file, I've added :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock]
"AutoDST"=dword:00000001
"ShowDSTUI"=dword:00000001
In the 'Paris' time zone, on sunday October 28th, 2007, when the hour
will pass of 1:59AM to 2:00AM, then the hour must be adjusted to
3:00AM.
This is my procedure to test DST mechanism :
- With 'Date/Time Properties', I set the RTC to sunday October 21th,
2007 0:00AM (one week before date/time transition) and I validate.
- With 'Date/Time Properties', I set the RTC to sunday October 28th
1:55AM and I validate.
- I wait 10 minutes, but nothing happen and the time continue to be
normally incremented.
- After this time (ie 2:05AM), if I go again in the 'Date/Time
Properties' and I validate without changing anything, WinCE 'see' the
time transition and set the time to 3:05AM with displaying a dialog
box that inform me that the time has been changed automatically.
Should I add another component to my image ?
Many thanks for your help.
Olivier.
.
- Prev by Date: Re: about ADOCE
- Next by Date: Re: Increasing performance of PB5.0
- Previous by thread: prefetch data abort on WinCE kernel
- Next by thread: Re: DST don't work ?
- Index(es):
Relevant Pages
|