Freescale MX21 ADS 2.0

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I am trying to get the NAND EBOOT to work on my dev board. I am
following the instructions that came with the MX21 kit and not having
the results I expect. If someone has this working, please help if you
can.

I have the MX21 ADS 2.0 board from Freescale.
I have installed the NAND daughter board that came with it.
I have created a new platform based on the MX21 BSP RTM6 that I got
from my Freescale Rep. It is supposed to be the latest release of it.

I included all the right stuff in the image and am able to download
the OS image to RAM and it runs as well as seeing a NAND Flash drive
that works so I know I have the NAND board installed correctly and the
NAND drivers working in the OS at least.

There is an eboot_nand folder under the release folder. It has
eboot.bin and eboot.nb0 in it.

I set the boot jumpers all to on for USB boot.

I load HAB 2.3 and have tried about every combination of settings I
can think of to try to send the eboot to the RAM and execute it.
Nothing ever runs. I tried the LED sample in the examples folder and
the LEDs blink like they are supposed to so I know the system works.

Can someone give me step by step instructions on exactly what I need
to do to get this crazy thing to eboot from the NAND daughter card and
then how to put my image on the NAND so it will also boot and then I
want the remaining flash to be a drive that the system uses as its
root.

Thanks.

.

Relevant Pages

  • Re: help on eboot from NAND flash
    ... is it a msystem nand? ... msystem has a working port of eboot already. ... > loader code from NAND flash. ...
    (microsoft.public.windowsce.platbuilder)
  • vivi and eboot technology
    ... Since the supplier ... I modified the raw eboot source code which supplied with Samsung' ... But I want it download image into nand flash and boot. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Questions about WinCE 6.00 ARM assembler and Linker
    ... When i.MX27 boots from NAND Flash, it reads the first 2kBytes from NAND block 0 and jump to it. ... So the first thing to do in this first to 2ko of code is to copy EBOOT from NAND Flash to RAM and jump to the RAM. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Bootloaders and OS image update
    ...  (function of stepldr:- copies eboot from nand to ram) ...  2) There is a requirement to update the bootloaders and OS image from sd card, ...  In eboot i check this GPIO if it is high then instead of normal boot operation ... has image header which specifies address of RAM where it should be ...
    (microsoft.public.windowsce.platbuilder)
  • Re: How NK.bin burned into NAND flash
    ... add eboot the capability to copy the NK from NAND to RAM and jump on it. ... I am having problem to prepare a romimage for the flash burner. ...
    (microsoft.public.windowsce.platbuilder)