Re: PB Emulator ... 64MB limit & FSRAMPERCENT

No I've been a good citizen and removed that option from the menu pick.

After repairing my Platform Builder ... which I seem to need about every 6
months ... I've successfully built the emulator image with the FSRAMPERCENT
var to tweak my memory allocation.

Everything is fine at this time.


-arnie

"Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:O3Wp$WnkHHA.3996@xxxxxxxxxxxxxxxxxxxxxxx
You didn't run Build and Sysgen did you? Don't do that.

Your change should only require a buildrel, and then makeimg.

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

"Arnie" <jefferyronaldarnett@xxxxxxx> wrote in message
news:Oo9DhHlkHHA.1216@xxxxxxxxxxxxxxxxxxxxxxx
Hey Bruce,

I set the FSRAMPERCENT in my config.bib using a sample from Sue Loh's
blog.

The result was the build failed ... one of the MS genCPU?? projects
failed to build.

I had to do a repair on platform builder to get *anything* to work at
that point.

I'm just now attempting to do it again.

-arnie


"Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:Osre87akHHA.1216@xxxxxxxxxxxxxxxxxxxxxxx
What did you set FSRAMPERCENT to?

SetSystemMemoryDivision() might help.

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

"Arnie" <jefferyronaldarnett@xxxxxxx> wrote in message
news:O8663yakHHA.680@xxxxxxxxxxxxxxxxxxxxxxx
Folks,


We're on CE5.0, x86, AMD Geodelx platform but use the emulator to run
our unit tests on the build machine each night.


We've exceeded the 64MB limit of the emulator. Apparently there is no
way to get more memory ... this was confirmed by MS.


Since the total memory is split between RAM and the filestore we were
hoping to reconfigure this "split".


The documented FSRAMPERCENT (shift to favor system RAM etc.) variable
has no affect on the emulator.


Any ideas?


-jeff










.

Relevant Pages

  • Re: Windows CE emulator
    ... I assume eVC++, it comes with it as part of the ... In Platform Builder you will create a project based on the emulator and ... beitman AT applieddata DOT net ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Help to make application !!!
    ... Which you will create with Platform Builder and you OSDesign. ... beitman AT applieddata DOT net ... So that he propose to me that i do the following applications: ... Is that any order of installation to follow? ...
    (microsoft.public.windowsce.platbuilder)
  • Re: problem building with armv4i
    ... The errors displayed in Platform Builder is: ... Length psize vsize Filler ... beitman AT applieddata DOT net ... This also happens when I run Build and Sysgen current BSP. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Boot disk
    ... Do you have Platform Builder set up to connect to your device for both boot ... beitman AT applieddata DOT net ... Applied Data Systems ... "Bruce Eitman (eMVP)" wrote: ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Testing application in an emulator
    ... patches for Platform Builder that updates the dlls, ... I think that there were some problems with building and running the emulator ... Bruce.Eitman AT EuroTech DOT com ... Since your device is ARM-based you may use those DLLs on it. ...
    (microsoft.public.windowsce.platbuilder)