Re: Activesync CE 6.0 RS232
- From: Valter Minute <v_a_l_t_e_r.m_i_n_u_t_e@xxxxxxxxxxxxx>
- Date: Tue, 17 Apr 2007 06:22:03 -0700
=?Utf-8?B?YnViYmE=?= <bubba@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
news:2B25C2DA-9841-4678-90D2-F1179D1AD651@xxxxxxxxxxxxx:
We are targeting a CEPC (VIACN700 chipset) and are having trouble
getting Activesync up and running. The device has repllog;
however, when I try to initiate an ActiveSync connection from the
dev. sytem, it does not connect.
We are loading the nk.bin image over Ethernet and have proven that
the COM1 and COM2 hardware work properly (using an XP image).
We have disabled the debug messages from using COM1 (on the
device); however, Activesync still does not connect.
Any suggestions or hints would be appreciated.
Repllog get executed on the device when you connect the cable?
If you open an hyperterminal session on the PC using 19200 8N1 you
see the string CLIENT sent by the device?
Even if you disabled serial debug on COM1 it will be recognized as
COM2 in CE and the "dos" COM2 will be COM1 in CE (if you used a
CEPC-based BSP).
--
Valter Minute
(the reply address of this message is invalid)
(l'indirizzo di reply di questo messaggio non è valido)
.
- Follow-Ups:
- Re: Activesync CE 6.0 RS232
- From: bubba
- Re: Activesync CE 6.0 RS232
- Prev by Date: Re: any problem of my memory config?
- Next by Date: Image requirements for debugging
- Previous by thread: Re: Stream Device Driver How-to
- Next by thread: Re: Activesync CE 6.0 RS232
- Index(es):
Relevant Pages
|
Loading
