microsoft.public.windowsce.platbuilder

• Thread Index

• Re: How to set up Platform Builder and Lauterbach
  • From: RichardB
• Re: Downloading the image of WinCE6.0
  • From: RichardB
• Re: after update PB patch, we need build and sysgen or only sysgen
  • From: Paul G. Tobey [eMVP]
• Re: about sdio ddk
  • From: Paul G. Tobey [eMVP]
• Re: How to communicate between kernel driver and user driver?(CE6.0)
  • From: Paul Monson
• Re: Stream Device Driver How-to
  • From: Bruce Eitman [eMVP]
• Re: Runtime resolution change in Display driver
  • From: Mauricio Sousa (Connec Brasil)
• Re: Exception happened,and how to know what's wrong?
  • From: Bruce Eitman [eMVP]
• Re: Repllog
  • From: Bruce Eitman [eMVP]
• bluetooth cf on pxa270
  • From: nishikant
• Re: .NET CF 2.0 is not appearing in WinCE PB 5.0 catlog list
  • From: Mauricio Sousa (Connec Brasil)
• Re: how to handle with SD driver when suspend and resume
  • From: GraemeW
• Re: TTS for Windows CE
  • From: GraemeW
• Re: cause of DEBUGCHK in NDIS51
  • From: AllanL
• Include file winnetwk.h missing
  • From: Alan Green
• Serial Kitl can't leave KITLConnectToDesktop()
  • From: Jiun
• Re: how to handle with SD driver when suspend and resume
  • From: Rob Nock
• How to communicate between kernel driver and user driver?(CE6.0)
  • From: abc
• Re: ROMHDR content has been changed when boot.
  • From: wrani
• Re: Howo to setup a DMA directly?
  • From: Andrew at Plextek (www.plextek.co.uk)
• Howo to setup a DMA directly?
  • From: Calvin
• Exception happened,and how to know what's wrong?
  • From: shofar
• wince 5.0 with usb active sync
  • From: Dorothy
• RE: Network bridge in Windows CE 5.0
  • From: "Soemin Tjong [MSFT]"
• RE: CE5 halt when I ping target from 8019 lan card with big packet
  • From: "Soemin Tjong [MSFT]"
• RE: cause of DEBUGCHK in NDIS51
  • From: "Soemin Tjong [MSFT]"
• cause of DEBUGCHK in NDIS51
  • From: ms
• Re: PCI Power Control (Geode Chipset)
  • From: Remi de Gravelaine
• Re: ROMHDR content has been changed when boot.
  • From: LDW
• Re: ROMHDR content has been changed when boot.
  • From: Steve Araiza
• Re: Downloading eboot.nb0 with Macraigor usbWiggler
  • From: Steve Araiza
• TTS for Windows CE
  • From: cybervedaa
• about sdio ddk
  • From: lawrence
• Re: after update PB patch, we need build and sysgen or only sysgen
  • From: Nicolas
• Re: ROMHDR content has been changed when boot.
  • From: LDW
• Re: CE 4.2 QFE application
  • From: Sid Price
• SignBin
  • From: ydlu
• populating 6.0 BSP into catalog ??
  • From: Skin Diver
• About killing home.exe
  • From: Marcelovk
• Re: CE 4.2 QFE application
  • From: Paul G. Tobey [eMVP]
• Re: BUILD ONLY COREDLL
  • From: Dean Ramsier
• Re: PCI Power Control (Geode Chipset)
  • From: genob
• Re: build number wrong
  • From: Dean Ramsier
• Re: after update PB patch, we need build and sysgen or only sysgen
  • From: Dean Ramsier
• Re: CE 4.2 QFE application
  • From: Jalen He [MSFT]
• Re: Router and DHCP server
  • From: Paul G. Tobey [eMVP]
• Re: ROMHDR content has been changed when boot.
  • From: Paul Monson
• Re: CE 4.2 QFE application
  • From: Paul G. Tobey [eMVP]
• Re: Router and DHCP server
  • From: Paul G. Tobey [eMVP]
• Re: WinCE USB
  • From: Paul G. Tobey [eMVP]
• Re: Does WinCE support these protocol ?
  • From: Paul G. Tobey [eMVP]
• Adding TrueFFS File System as Root in WinCE 5.0
  • From: Elmo
• Re: PCMCIA I82365 issue
  • From: Sam
• Re: HKLM\init key issues
  • From: Michael Salamone
• HKLM\init key issues
  • From: vikram . jey
• Re: .rel File What kind of function?
  • From: Dean Ramsier
• Re: Stream Device Driver How-to
  • From: Phil
• Re: Can WinCE catch FAT32 CF card ?
  • From: Dean Ramsier
• Re: build number wrong
  • From: Dean Ramsier
• Re: after update PB patch, we need build and sysgen or only sysgen
  • From: Dean Ramsier
• Runtime resolution change in Display driver
  • From: somraj
• Re: driver Intel 82541ER - Help
  • From: Paolo
• Re: driver Intel 82541ER - Help
  • From: Mario Z
• Re: driver Intel 82541ER - Help
  • From: Paolo
• About wince test kit trouble
  • From: David.h Deng
• About wince test kit trouble
  • From: David.h Deng
• About wince test kit trouble
  • From: David.h Deng
• Re: WinCE USB
  • From: Bator
• Re: PCI Power Control (Geode Chipset)
  • From: Remi de Gravelaine
• Re: ROMHDR content has been changed when boot.
  • From: LDW
• Re: CESH error: Unable to load device side components
  • From: Treadstone
• Transferring PCM audio data with RTP problem!!
  • From: kamali . srinivasan
• ROMHDR content has been changed when boot.
  • From: LDW
• Re: About SPP in WINCE5.0
  • From: think
• Re: locales in the CE image
  • From: Paul Monson
• In WinCE 5.0, try to get the PropertyTagFrameDelay property,
  • From: ricklin
• Re: CE 4.2 QFE application
  • From: Sid Price
• locales in the CE image
  • From: Arnie
• Re: Http stream from ASX file
  • From: David
• Re: .rel File What kind of function?
  • From: Arnie
• Re: CE 4.2 QFE application
  • From: Paul G. Tobey [eMVP]
• Re: CE 4.2 QFE application
  • From: Dean Ramsier
• Re: Downloading eboot.nb0 with Macraigor usbWiggler
  • From: Dean Ramsier
• Re: CE 4.2 QFE application
  • From: Sid Price
• Re: Serial Port driver registry settings.
  • From: Paul G. Tobey [eMVP]
• Re: PCMCIA I82365 issue
  • From: David Liao \(MS\)
• Re: WinCE 5.0 USB connection issues
  • From: David Liao \(MS\)
• Re: Serial Port driver registry settings.
  • From: Imti
• Re: "Release Directory Modules.." feature not working?
  • From: Amjad \(MSFT\)
• Re: PCI Power Control (Geode Chipset)
  • From: Riki
• PCI Power Control (Geode Chipset)
  • From: genob
• Re: PQ OAL and system with timer of 1024 ticks per second
  • From: Riki
• Re: VIA Atapi
  • From: Sergei R
• Re: WIFI ATHEROS CHIP SET
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: PCMCIA I82365 issue
  • From: Sam
• Re: Serial Port driver registry settings.
  • From: Paul G. Tobey [eMVP]
• Re: .rel File What kind of function?
  • From: Bruce Eitman [eMVP]
• Re: Google groups not working?
  • From: Paul G. Tobey [eMVP]
• Re: CE 4.2 QFE application
  • From: Paul G. Tobey [eMVP]
• Re: WinCE USB
  • From: Paul G. Tobey [eMVP]
• PQ OAL and system with timer of 1024 ticks per second
  • From: Isaac Chen
• Re: How can I know the LCD function is ready?
  • From: Paul G. Tobey [eMVP]
• Re: Stream Device Driver How-to
  • From: Bruce Eitman [eMVP]
• Re: WinCE 5.0 USB connection issues
  • From: Darren Steadman
• Serial Port driver registry settings.
  • From: Imti
• Re: Google groups not working?
  • From: Valter Minute
• Re: -OemInit
  • From: Valter Minute
• -OemInit
  • From: Rudy Barbieri
• Google groups not working?
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Aout the Command line error D8004
  • From: Valter Minute
• Re: Stream Device Driver How-to
  • From: Phil
• RE: Windows CE6 Device as web server with ActiveX Control
  • From: lagu2653
• Aout the Command line error D8004
  • From: David.h Deng
• Re: CESH error: Unable to load device side components
  • From: Treadstone
• mmtimer (time driver)
  • From: Anwar
• Windows CE6 Device as web server with ActiveX Control
  • From: chrism
• Re: CE 4.2 QFE application
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: load device driver
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: USB Problem
  • From: zhanghui
• Re: Installable ISR problem.
  • From: Andrew at Plextek (www.plextek.co.uk)
• CESH Startup Server error.
  • From: Treadstone
• Re: WinCE USB
  • From: Bator
• Re: WinCE USB
  • From: Bator
• Re: VIA Atapi
  • From: Rob
• Re: Change Fonts link path???
  • From: Henrik Viklund
• Re: load device driver
  • From: Rob Nock
• RE: Request for the Location of the ntirp.c file in Platform Builder 5
  • From: Stanley
• Re: "Release Directory Modules.." feature not working?
  • From: yuanfei.work@xxxxxxxxx
• Problem setting the timer reschedule value
  • From: Chitra
• problem regarding setting the timer reschedule value
  • From: Chitra
• Fail to change font link path ?
  • From: Dogfu
• RE: how to show boot messages on the device screen?
  • From: Mishra
• Re: CESH error: Unable to load device side components
  • From: Amjad \(MSFT\)
• Re: CE 4.2 QFE application
  • From: Riki
• Re: CE 4.2 QFE application
  • From: Paul G. Tobey [eMVP]
• Re: Installable ISR problem.
  • From: David Liao \(MS\)
• Re: CE 4.2 QFE application
  • From: Sid Price
• Downloading eboot.nb0 with Macraigor usbWiggler
  • From: Mario
• Re: CE 4.2 QFE application
  • From: Riki
• CE 4.2 QFE application
  • From: Sid Price
• Re: WinCE 5.0 USB connection issues
  • From: David Liao \(MS\)
• Re: PCMCIA I82365 issue
  • From: David Liao \(MS\)
• Re: Bug in CE5.0 "Microsoft PowerPoint Viewer"?
  • From: Dean Ramsier
• Re: load device driver
  • From: Paul G. Tobey [eMVP]
• load device driver
  • From: James
• Re: Downloading DLL to the device
  • From: Bruce Eitman [eMVP]
• PCMCIA I82365 issue
  • From: Sam
• Re: VIA Atapi
  • From: Sergei R
• RE: WinCE 5 USB Driver issues
  • From: Darren Steadman
• Re: CE 6.0 KITL debug messages.
  • From: Jean-Jacques Hiblot
• Re: CE6.0 PPP does not list all zones.
  • From: Dean Ramsier
• Re: after update PB patch, we need build and sysgen or only sysgen?
  • From: Dean Ramsier
• Re: Router and DHCP server
  • From: Paul G. Tobey [eMVP]
• Re: Router and DHCP server
  • From: Paul G. Tobey [eMVP]
• Re: Downloading DLL to the device
  • From: Paul G. Tobey [eMVP]
• Re: BSP Support
  • From: <ctacke/>
• Re: after update PB patch, we need build and sysgen or only sysgen?
  • From: Erwin Zwart
• Re: Bug in CE5.0 "Microsoft PowerPoint Viewer"?
  • From: Ashutosh Zade
• Re: USB Drive not detected in CE 5.0
  • From: SD
• Re: CE 5 bootloader with CE 6
  • From: GraemeW
• Re: CE 5 bootloader with CE 6
  • From: GraemeW
• Re: CE 5 bootloader with CE 6
  • From: Dean Ramsier
• CE 5 bootloader with CE 6
  • From: Skin Diver
• Re: How can we provide SPP service in our OS?
  • From: GraemeW
• Re: Installing CE 6 broke my KITL CE 5 debugger
  • From: Skin Diver
• regarding setting timer reschedule period. Please Help
  • From: Chitra
• Problem regarding timer reschedule period. Please help.
  • From: Chitra
• Re: How can we provide SPP service in our OS?
  • From: GraemeW
• CESH error: Unable to load device side components
  • From: Treadstone
• RE: WinCE 5 USB Driver issues
  • From: Rob
• RE: driver Intel 82541ER - Help
  • From: Mario Z
• WinCE 5.0 USB connection issues
  • From: Darren Steadman
• Re: How to set up Platform Builder and Lauterbach
  • From: Lal
• Re: USB flash drive auto mount
  • From: Rob Nock
• WinCE 5 USB Driver issues
  • From: Darren Steadman
• Re: timebomb error in make image step
  • From: Erwin Zwart
• Downloading DLL to the device
  • From: maite
• Change Fonts link path???
  • From: Dogfu
• timebomb error in make image step
  • From: cmarin
• Re: PB updates
  • From: Raheem
• Change Fonts link path???
  • From: Dogfu
• Re: build number wrong
  • From: Helge Kruse
• Re: Windows CE memory release
  • From: Mams
• Re: "Release Directory Modules.." feature not working?
  • From: Amjad \(MSFT\)
• Re: Platform Builder debug session slow to load module symbols
  • From: Amjad \(MSFT\)
• Re: CE 6.0 KITL debug messages.
  • From: Amjad \(MSFT\)
• Re: Installing CE 6 broke my KITL CE 5 debugger
  • From: Amjad \(MSFT\)
• Re: USB Drive not detected in CE 5.0
  • From: SD
• Re: Installable ISR problem.
  • From: K. S. Huang
• Answer: Re: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk\kernel\nknormal\..\process.c at line 248
  • From: jMonty
• Re: CE 6.0 DumpMem() in cclib.lib
  • From: Dylan DSilva \(MS\)
• Re: USB flash drive auto mount
  • From: Stan
• Re: Running application at start-up
  • From: Rob
• Re: PB updates
  • From: Paul G. Tobey [eMVP]
• Re: Bug in CE5.0 "Microsoft PowerPoint Viewer"?
  • From: Dean Ramsier
• Re: Running application at start-up
  • From: JDuarte
• Intel PRO/Wireless CE Driver
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: CE 4.2 memory leak
  • From: Paul Monson
• Re: WinCE USB
  • From: Paul G. Tobey [eMVP]
• Re: PB updates
  • From: Paul G. Tobey [eMVP]
• Re: Strange build error
  • From: Paul Monson
• Re: Bug in CE5.0 "Microsoft PowerPoint Viewer"?
  • From: Ashutosh Zade
• Re: Running application at start-up
  • From: Steve Kelley
• Installing CE 6 broke my KITL CE 5 debugger
  • From: Skin Diver
• Re: Downloading the image of WinCE6.0
  • From: RichardB
• Re: Is it a celog bug to get the dwCodeBase?
  • From: Sue Loh [MS]
• Re: Downloading the image of WinCE6.0
  • From: RichardB
• Re: PB updates
  • From: Bruce Eitman [eMVP]
• Re: Running application at start-up
  • From: Bruce Eitman [eMVP]
• Re: Stream Device Driver How-to
  • From: Bruce Eitman [eMVP]
• Re: DirectShow framework is available in wince 6.0?
  • From: Ashutosh Zade
• Installable ISR problem.
  • From: Simon Forrester
• Re: About SPP in WINCE5.0
  • From: Anthony Pellerin
• DirectShow framework is available in wince 6.0?
  • From: Jesse
• driver Intel 82541ER - Help
  • From: Mario Z
• Re: Platform Builder debug session slow to load module symbols
  • From: F.Reither
• Re: About SPP in WINCE5.0
  • From: think
• CE 6.0 KITL debug messages.
  • From: LandSlide
• CE6.0 PPP does not list all zones.
  • From: LandSlide
• WinCE USB
  • From: Stefan Burkhart
• Re: USB flash drive auto mount
  • From: Rob Nock
• RE: how to show boot messages on the device screen?
  • From: Rob
• CE 6.0 DumpMem() in cclib.lib
  • From: LandSlide
• Re: How to know the sd card is present or not?
  • From: Anthony Pellerin
• Re: About SPP in WINCE5.0
  • From: Anthony Pellerin
• Re: Cannot read Remote Performance Monitor log files
  • From: Prakash Gupta
• How to know the sd card is present or not?
  • From: eCJKao
• Re: how to show boot messages on the device screen?
  • From: Mishra
• Re: Platform Builder debug session slow to load module symbols
  • From: richardlang
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Paul G. Tobey [eMVP]
• CE 4.2 memory leak
  • From: Sid Price
• Re: USB flash drive auto mount
  • From: Stan
• Strange build error
  • From: Skin Diver
• Re: Stream Device Driver How-to
  • From: Bruce Eitman [eMVP]
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Peter Kinsella
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Paul G. Tobey [eMVP]
• Re: Stream Device Driver How-to
  • From: Sing Wee [MSFT]
• Re: CE 5.0 drivers compatible with CE 6.0?
  • From: Dean Ramsier
• Re: Regarding CF driver
  • From: Dean Ramsier
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: <ctacke/>
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Peter Kinsella
• Re: Is there any free notepad software for wince.net42 arm platform.
  • From: Paul G. Tobey [eMVP]
• Re: Winsock version question
  • From: Paul G. Tobey [eMVP]
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: <ctacke/>
• Re: Memory problem understanding help required
  • From: GraemeW
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Peter Kinsella
• Re: XIP dlls
  • From: Bruce Eitman [eMVP]
• Re: Stream Device Driver How-to
  • From: Phil
• Re: thread doesnot reschedule after sleep
  • From: <ctacke/>
• Re: USB flash drive auto mount
  • From: Rob Nock
• acmformatchoose with fdwEnum ACM_FORMATENUMF_SUGGEST throws except
  • From: WinCEtest
• Re: USB flash drive auto mount
  • From: Rob Nock
• Re: parameter range checking
  • From: nihar
• Re: "Release Directory Modules.." feature not working?
  • From: yuanfei.work@xxxxxxxxx
• Re: WIFI ATHEROS CHIP SET
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: CE 5.0 drivers compatible with CE 6.0?
  • From: Valter Minute
• WIFI ATHEROS CHIP SET
  • From: Miky
• Re: thread doesnot reschedule after sleep
  • From: Valter Minute
• About SPP in WINCE5.0
  • From: think
• WinCE 6.0 bootup in PXA270
  • From: Jeyanthi Jayakumar
• Re: thread doesnot reschedule after sleep
  • From: Chitra
• Re: ping problem in ce5.0
  • From: Maverick
• Re: acmDriverAdd returns MMSYSERR_NOTSUPPORTED
  • From: WinCEtest
• Re: Regarding CF driver
  • From: mukesh . kr . modi
• Re: thread doesnot reschedule after sleep
  • From: Chitra
• Platform Builder debug session slow to load module symbols
  • From: richardlang
• Re: mainstone iii - remove keypad
  • From: soreeye
• mainstone iii - remove keypad
  • From: soreeye
• Re: SD/MMC driver for dual cards(multiple slots)
  • From: David Liao \(MS\)
• Re: USB Driver Problem
  • From: David Liao \(MS\)
• Re: GetProcessHeap()
  • From: Martinos
• Re: InjectDLL question
  • From: Michael Salamone
• hi all, cannot make the chinese language image in pb42.
  • From: kavin
• Is there any free notepad software for wince.net42 arm platform.
  • From: kavin
• USB Driver Problem
  • From: heavyelk@xxxxxxxxx
• Re: GetProcessHeap()
  • From: Michael Salamone
• Re: CE 5.0 drivers compatible with CE 6.0?
  • From: andyraf
• Re: acmDriverAdd returns MMSYSERR_NOTSUPPORTED
  • From: andyraf
• Re: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk\kernel\nknormal\..\process.c at line 248
  • From: Michael Salamone
• Re: InjectDLL question
  • From: Michael Salamone
• OS in not launched
  • From: kracks
• Re: ping problem in ce5.0
  • From: <ctacke/>
• Re: ping problem in ce5.0
  • From: Maverick
• Re: USB Drive not detected in CE 5.0
  • From: Rob
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• Re: USB Drive not detected in CE 5.0
  • From: SD
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: Peter Kinsella
• Source level Eboot debugging
  • From: shiju
• Re: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk\kernel\nknormal\..\process.c at line 248
  • From: Ross Jordan [MSFT]
• Re: WinCE 5.00 .NET CF 1.0 problem
  • From: <ctacke/>
• Re: XIP dlls
  • From: K. S. Huang
• WinCE 5.00 .NET CF 1.0 problem
  • From: Peter Kinsella
• Re: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk\kernel\nknormal\..\process.c at line 248
  • From: Dan McCarty
• Re: GetProcessHeap()
  • From: K. S. Huang
• Re: GetProcessHeap()
  • From: Valter Minute
• Re: First Chance Exception
  • From: PK
• DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk\kernel\nknormal\..\process.c at line 248
  • From: jMonty
• First Chance Exception
  • From: PK
• Re: embedded visual c++ to Visual Studio 2005 Migration
  • From: Paul G. Tobey [eMVP]
• Re: ping problem in ce5.0
  • From: Paul G. Tobey [eMVP]
• Re: BSQUARE PXA270 GPIO Daughter card Interrupts
  • From: Bruce Eitman [eMVP]
• RE: USB Drive not detected in CE 5.0
  • From: Rob
• Re: thread doesnot reschedule after sleep
  • From: <ctacke/>
• BSQUARE PXA270 GPIO Daughter card Interrupts
  • From: Tashi
• Re: ping problem in ce5.0
  • From: Ashutosh Zade
• Re: thread doesnot reschedule after sleep
  • From: Remi de Gravelaine
• Re: thread doesnot reschedule after sleep
  • From: Valter Minute
• Re: USB flash drive auto mount
  • From: Valter Minute
• Re: thread doesnot reschedule after sleep
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Memory problem understanding help required
  • From: Martinos
• Re: thread doesnot reschedule after sleep
  • From: <ctacke/>
• embedded visual c++ to Visual Studio 2005 Migration
  • From: CAGRI
• Re: thread doesnot reschedule after sleep
  • From: Chitra
• Re: thread doesnot reschedule after sleep
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Wince6.0 explorer
  • From: GraemeW
• Re: Memory problem understanding help required
  • From: GraemeW
• thread doesnot reschedule after sleep
  • From: Chitra
• Regarding CF driver
  • From: mukesh . kr . modi
• any problem of my memory config?
  • From: sampeper
• Re: ping problem in ce5.0
  • From: GraemeW
• sd bus driver should be re-implemented for our soc platform?
  • From: Jesse
• Re: Regarding Connectivity options in CE Platform Builder
  • From: Andrew at Plextek (www.plextek.co.uk)
• Q: SD/MMC driver for dual cards(multiple slots)
  • From: JeongSeob.Ahn
• Re: CE 5.0 drivers compatible with CE 6.0?
  • From: Valter Minute
• Re: USB Drive not detected in CE 5.0
  • From: Valter Minute
• Re: How to make builtin nand flash as usb mass storage devices.
  • From: Henrik Viklund
• USB Drive not detected in CE 5.0
  • From: SD
• Regarding Connectivity options in CE Platform Builder
  • From: rajesh
• Bad messages in menus, bar, etc..
  • From: Oscar
• Re: Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: Imti
• ping problem in ce5.0
  • From: Maverick
• Re: ce5.0 SDK roller error
  • From: Maverick
• RE: KITL and vbridge
  • From: luke
• Re: Stream Device Driver How-to
  • From: Sing Wee [MSFT]
• Re: "Release Directory Modules.." feature not working?
  • From: Amjad \(MSFT\)
• Re: Regarding Shell
  • From: Amjad \(MSFT\)
• Re: Problem analyzing Dr Watson dump on CE 6.0 image
  • From: Amjad \(MSFT\)
• Re: CE5 & 6 on Vista
  • From: Dan McCarty
• Re: Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: GraemeW
• Re: SD Card write problem
  • From: Dan McCarty
• Re: Newbee question for Platform Builder
  • From: Paul G. Tobey [eMVP]
• Re: Regarding Shell
  • From: Paul G. Tobey [eMVP]
• Re: SD Card write problem
  • From: PK
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Valter Minute
• Re: SD Card write problem
  • From: Dan McCarty
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Valter Minute
• Re: SD Card write problem
  • From: PK
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Dean Ramsier
• Re: How to make builtin nand flash as usb mass storage devices.
  • From: eCJKao
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Valter Minute
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Valter Minute
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Susan
• Re: How to know a storage was mounted finish.
  • From: <ctacke/>
• Re: Loading driver for Compact Flash
  • From: GraemeW
• Re: USB flash drive auto mount
  • From: Rob Nock
• Regarding Shell
  • From: Chitra
• Re: How to know a storage was mounted finish.
  • From: GraemeW
• Re: How to make builtin nand flash as usb mass storage devices.
  • From: Valter Minute
• Re: Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: Imti
• Re: Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: Imti
• How to know a storage was mounted finish.
  • From: eCJKao
• Re: Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: GraemeW
• Re: How to find your USB mass storage device on the PC
  • From: GraemeW
• Serial Driver --> Unable to open COM1 Port ( transport and download port)
  • From: Imti
• Re: CreateThread() throws duplicate TLB exception on MIPS (CE5)
  • From: Andrew at Plextek (www.plextek.co.uk)
• "Release Directory Modules.." feature not working?
  • From: yuanfei.work@xxxxxxxxx
• Re: can I change the default KITL timeout value?
  • From: yuanfei.work@xxxxxxxxx
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Valter Minute
• Re: Newbee question for Platform Builder
  • From: Valter Minute
• Re: USB flash drive auto mount
  • From: Valter Minute
• Re: SD Card write problem
  • From: Valter Minute
• Re: Mount & unmount & ScanDisk
  • From: Valter Minute
• Re: Problem analyzing Dr Watson dump on CE 6.0 image
  • From: Valter Minute
• Re: USB flash drive auto mount
  • From: GraemeW
• Re: how to disable interrupts?
  • From: Remi de Gravelaine
• KITL and vbridge
  • From: luke
• PRB:wince.nls in CE5.0
  • From: Dannel
• SD Card write problem
  • From: PK
• Re: How to launch cmd.exe over serial port at startup
  • From: Imti
• how to disable interrupts?
  • From: maite
• Re: Mount & unmount & ScanDisk
  • From: B.R.Liao
• Re: KITL problem?
  • From: LDW
• Re: KITL problem?
  • From: LDW
• Re: KITL problem?
  • From: LDW
• Re: CE5 & 6 on Vista
  • From: Amjad \(MSFT\)
• Re: KITL problem?
  • From: LDW
• Re: Newbee question for Platform Builder
  • From: bpriya
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Amjad \(MSFT\)
• Re: Getting a USB mouse to work with a USB Host card
  • From: Todd MacMillan
• Re: How to generate symbols for RealView JTAG Debugger from PB
  • From: Amjad \(MSFT\)
• Re: Newbee question for Platform Builder
  • From: Paul G. Tobey [eMVP]
• Re: Getting a USB mouse to work with a USB Host card
  • From: Paul G. Tobey [eMVP]
• Missing comm.cpp and comm.h in the Platform Builder 5.0 Eva.
  • From: mike
• Re: How to launch cmd.exe over serial port at startup
  • From: Henrik Viklund
• Re: CE5 & 6 on Vista
  • From: Amjad \(MSFT\)
• Re: Image requirements for debugging
  • From: <ctacke/>
• Re: Problem analyzing Dr Watson dump on CE 6.0 image
  • From: Amjad \(MSFT\)
• Re: How to check programming interface of a CE device ?
  • From: Paul Monson
• Re: Image requirements for debugging
  • From: Amjad \(MSFT\)
• Re: (CoreCon) 11:58:32 04/17/2007 Central Daylight Time: Failed to co-create service host!
  • From: Amjad \(MSFT\)
• Re: buying Windows CE 5.0
  • From: Paul G. Tobey [eMVP]
• buying Windows CE 5.0
  • From: Steve Kelley
• Re: How to launch cmd.exe over serial port at startup
  • From: Riki
• Re: Need Help to set breakpoint to debug the code
  • From: Paul Monson
• Re: ce5.0 SDK roller error
  • From: Paul Monson
• Re: How to launch cmd.exe over serial port at startup
  • From: Ashutosh Zade
• Re: USB mass storage issue
  • From: Alex
• Re: windows and temp folder properties
  • From: Paul G. Tobey [eMVP]
• Re: How to check programming interface of a CE device ?
  • From: Paul G. Tobey [eMVP]
• Re: How to hide some file in
  • From: Paul G. Tobey [eMVP]
• Re: missing ceddk.lib
  • From: Valter Minute
• missing ceddk.lib
  • From: Rudy Barbieri
• Re: any problem of my memory config?
  • From: Dean Ramsier
• Re: ce5.0 SDK roller error
  • From: voidcoder
• Re: How to launch cmd.exe over serial port at startup
  • From: Henrik Viklund
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: ER
• Re: How to launch cmd.exe over serial port at startup
  • From: Henrik Viklund
• Re: USB mass storage issue
  • From: Henrik Viklund
• Re: ce5.0 SDK roller error
  • From: Maverick
• Re: ce5.0 SDK roller error
  • From: Maverick
• Re: How to launch cmd.exe over serial port at startup
  • From: GraemeW
• Re: CreateThread() throws duplicate TLB exception on MIPS (CE5)
  • From: GraemeW
• Re: Bluetooth 10050 error
  • From: GraemeW
• How to launch cmd.exe over serial port at startup
  • From: rajesh
• Re: Mount & unmount & ScanDisk
  • From: Valter Minute
• Re: Stream Device Driver How-to
  • From: Phil
• Re: Problem analyzing Dr Watson dump on CE 6.0 image
  • From: Valter Minute
• RE: KITL problem?
  • From: Eike
• Re: Need Help to set breakpoint to debug the code
  • From: Rob
• Re: USB mass storage issue
  • From: Alex
• Re: Mount & unmount & ScanDisk
  • From: AJMilford
• CreateThread() throws duplicate TLB exception on MIPS (CE5)
  • From: Andrew at Plextek (www.plextek.co.uk)
• KITL problem?
  • From: LDW
• Re: ce5.0 SDK roller error
  • From: voidcoder
• Re: ce5.0 SDK roller error
  • From: Andrew at Plextek (www.plextek.co.uk)
• ce5.0 SDK roller error
  • From: Maverick
• Mount & unmount & ScanDisk
  • From: B.R.Liao
• NDIS intermediate driver + QOS
  • From: Piotr Wojcicki
• Re: How to expose second partition of mounted nand flash to usb host?
  • From: Henrik Viklund
• Re: USB Mass Storage Device (final)
  • From: Henrik Viklund
• Re: LargeKB keyboard in German or any other non-enlgish language
  • From: Javier Grijalba
• Re: windows and temp folder properties
  • From: soreeye
• Kernel startup down when MDCreateThread at SchedInit()
  • From: Jesse
• Re: 512 Bytes Per Sector (WinCE5.0)
  • From: Aby
• Re: Fonts in CE 5.0
  • From: Oscar
• Re: DrWatson kernel support
  • From: LDW
• Re: location of CE's vector table
  • From: gdj
• Re: DrWatson kernel support
  • From: Michel Verhagen (eMVP)
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• DrWatson kernel support
  • From: LDW
• Re: any problem of my memory config?
  • From: Jesse
• lib flags
  • From: Mike C
• Re: How to disconnect ActiveSync to suspend
  • From: Hermes
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Charles Wang
• Re: Fonts in CE 5.0
  • From: Ashutosh Zade
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Charles Wang
• Re: Fix for KB926260 breaks build from custom SDK
  • From: <ctacke/>
• Re: Stream Device Driver How-to
  • From: Bruce Eitman [eMVP]
• (CoreCon) 11:58:32 04/17/2007 Central Daylight Time: Failed to co-create service host!
  • From: mike
• Re: How to make builtin nand flash as usb mass storage devices.
  • From: eCJKao
• Re: Activesync CE 6.0 RS232
  • From: Valter Minute
• Re: Activesync CE 6.0 RS232
  • From: Paul G. Tobey [eMVP]
• Re: How to disable suspend if window media playing
  • From: Paul G. Tobey [eMVP]
• Re: implement network utilities
  • From: Silver
• Re: Problem analyzing Dr Watson dump on CE 6.0 image
  • From: Valter Minute
• Re: windows and temp folder properties
  • From: Paul G. Tobey [eMVP]
• Re: Where to install third party platform independent device drivers
  • From: Paul G. Tobey [eMVP]
• Re: Activesync CE 6.0 RS232
  • From: bubba
• implement network utilities
  • From: Tom
• Theme elements in CE 5
  • From: Aaron
• Image requirements for debugging
  • From: <ctacke/>
• Re: Activesync CE 6.0 RS232
  • From: Valter Minute
• Re: any problem of my memory config?
  • From: Dean Ramsier
• Re: Stream Device Driver How-to
  • From: Valter Minute
• Re: sysgen error in Platform Builder
  • From: Bruce Eitman [eMVP]
• Re: Stream Device Driver How-to
  • From: Valter Minute
• Re: Stream Device Driver How-to
  • From: Valter Minute
• Fonts in CE 5.0
  • From: Oscar
• Re: DMA Transport not available in for DeviceEmulator 1.0
  • From: Barry Bond [MSFT]
• How to disable suspend if window media playing
  • From: CiticPacific
• Re: Problem with Nk.BIN flash address
  • From: Rudy Barbieri
• How to expose second partition of mounted nand flash to usb host?
  • From: eCJKao
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• Re: how to show boot messages on the device screen?
  • From: Valter Minute
• Re: how to show boot messages on the device screen?
  • From: Valter Minute
• Re: how to show boot messages on the device screen?
  • From: Rob
• Problem with Nk.BIN flash address
  • From: Rudy Barbieri
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• Re: how to show boot messages on the device screen?
  • From: Henrik Viklund
• windows and temp folder properties
  • From: soreeye
• Re: LargeKB keyboard in German or any other non-enlgish language
  • From: Henrik Viklund
• Where to install third party platform independent device drivers
  • From: Tashi
• sysgen error in Platform Builder
  • From: Dong-Kyu Kim
• any problem of my memory config?Thanks
  • From: Jesse
• any problem of my memory config?
  • From: Jesse
• Re: Language Support - Adding Code Pages
  • From: portnawake
• Re: Path in the registry file
  • From: ydlu
• Re: Path in the registry file
  • From: Paul G. Tobey [eMVP]
• Path in the registry file
  • From: ydlu
• Re: windows ce 4.2 platform builder
  • From: Paul G. Tobey [eMVP]
• Bluetooth 10050 error
  • From: oleg . litvak
• USB Serial communicate between WinCE(Box) <----> WindowsXP (PC)
  • From: mike
• 512 Bytes Per Sector (WinCE5.0)
  • From: Aby
• Re: 1 Gig SD limit
  • From: Dan McCarty
• Re: Is it possible to upgrade third party BSP by myself ?
  • From: <ctacke/>
• Re: Is it possible to upgrade third party BSP by myself ?
  • From: Paul G. Tobey [eMVP]
• LargeKB keyboard in German or any other non-enlgish language
  • From: Javier Grijalba
• Re: How to make builtin nand flash as usb mass storage devices.
  • From: Valter Minute
• How to make builtin nand flash as usb mass storage devices.
  • From: eCJKao
• Re: USB Mass Storage Device (final)
  • From: Henrik Viklund
• Re: about debug zone message?
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: How do I get rid of the red X in the bottom right corner of added
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: location of CE's vector table
  • From: Dean Ramsier
• Re: Replace sdbus.dll with my own SD bus driver
  • From: Tashi
• Re: about debug zone message?
  • From: Jesse
• Re: Language Support - Adding Code Pages
  • From: Keaven Pineau
• USB HID Mouse is not working
  • From: mig
• Re: How to debug kernel?
  • From: Anthony Pellerin
• Re: USB Mass Storage Device (final)
  • From: Bølla
• Re: can I change the default KITL timeout value?
  • From: Andrew at Plextek (www.plextek.co.uk)
• WIn CE 5.0 on Pentium M + 915GM + ICH6
  • From: Panino
• Re: How to add new directory under D:\WINCE500\PUBLIC\COMMON\OAK\CSP\ARM?
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: about debug zone message?
  • From: Andrew at Plextek (www.plextek.co.uk)
• about debug zone message?
  • From: Jesse
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: Jesse
• Re: How to debug kernel?
  • From: Jesse
• Re: Why can not WINCE6.0 Eval install package can not be downloaded?
  • From: Nokia_E61i : I am waiting for you!!!!!!
• Re: How to debug kernel?
  • From: Anthony Pellerin
• Re: How to make tiny kernel to run for arm926ej platform?
  • From: Anthony Pellerin
• Re: A problem about OAL development
  • From: David.H, Deng
• Re: Ethernet problem...
  • From: Mekas
• Re: A problem about OAL development
  • From: David.H, Deng
• KITL always show recieve packet timeout!!!
  • From: yuanfei.work@xxxxxxxxx
• How to add new directory under D:\WINCE500\PUBLIC\COMMON\OAK\CSP\ARM?
  • From: Jesse
• Re: CE .Net 4.2 installation problem
  • From: Michel Verhagen (eMVP)
• Re: Language Support - Adding Code Pages
  • From: portnawake
• CE .Net 4.2 installation problem
  • From: Ian Lartey
• can I change the default KITL timeout value?
  • From: yuanfei.work@xxxxxxxxx
• How to make tiny kernel to run for arm926ej platform?
  • From: Jesse
• How to debug kernel?
  • From: Jesse
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Zhiqiang Li
• Re: 1 Gig SD limit
  • From: Dale DePriest
• Re: A problem about OAL development
  • From: Barry Bond [MSFT]
• A problem about OAL development
  • From: David.H, Deng
• Re: 1 Gig SD limit
  • From: Dan McCarty
• Re: 1 Gig SD limit
  • From: Dale DePriest
• Language Support - Adding Code Pages
  • From: Keaven Pineau
• Re: How to determine the file system of a volume (FAT12/16/32, EXFAT, NTFS, CDFS)?
  • From: Dean Ramsier
• Re: my build process and error
  • From: Mike C
• Re: my build process and error
  • From: Arnie
• How to convert new platform template from CE5.0 to CE6.0
  • From: Arnie
• How to determine the file system of a volume (FAT12/16/32, EXFAT, NTFS, CDFS)?
  • From: Wolfgang Rolke
• Re: Bootloader's SDRAM and FLASH problems
  • From: K. S. Huang
• Re: How to modify x86 Bios loader 5.0
  • From: K. S. Huang
• Re: 1 Gig SD limit
  • From: Dan McCarty
• Re: Freeboot / Bootlogo / VESA
  • From: Sergei R
• Re: I need WinCE 4.2 Evulation Edition product key ..
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Freeboot / Bootlogo / VESA
  • From: Paul G. Tobey [eMVP]
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Windows CE memory release
  • From: Paul G. Tobey [eMVP]
• Re: Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention)
  • From: Paul G. Tobey [eMVP]
• Re: IE7.0&CE4.2
  • From: Paul G. Tobey [eMVP]
• Re: Freeboot / Bootlogo / VESA
  • From: Paul G. Tobey [eMVP]
• 1 Gig SD limit
  • From: Dale DePriest
• Re: Replace sdbus.dll with my own SD bus driver
  • From: Tashi
• Re: BUILD ONLY COREDLL
  • From: Dean Ramsier
• Re: location of CE's vector table
  • From: Dean Ramsier
• Re: VFP support on ARM under Windows CE 5.0
  • From: Dean Ramsier
• Re: Replace sdbus.dll with my own SD bus driver
  • From: Dean Ramsier
• Replace sdbus.dll with my own SD bus driver
  • From: Tashi
• Re: USB Mass Storage Device (final)
  • From: Henrik Viklund
• Re: Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention)
  • From: Tom
• USB Mass Storage Device (final)
  • From: Bølla
• How to modify x86 Bios loader 5.0
  • From: Oscar
• Re: Windows CE memory release
  • From: Mams
• RE: USB Activesync Autoconnect
  • From: Aigor
• Re: GWES crash when loading displaydriver from harddisk
  • From: Valter Minute
• Bootloader's SDRAM and FLASH problems
  • From: amppa
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Henrik Viklund
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• VFP support on ARM under Windows CE 5.0
  • From: Mark
• Re: location of CE's vector table
  • From: gdj
• Re: Newbie: Connectivity Options Issue
  • From: Silver
• Re: BUILD ONLY COREDLL
  • From: K. S. Huang
• Re: Partial Implementation of the Trusted Model in CE5?
  • From: Dan McCarty
• Re: Partial Implementation of the Trusted Model in CE5?
  • From: <ctacke/>
• Partial Implementation of the Trusted Model in CE5?
  • From: Dan McCarty
• Partial implementation of the Trusted Model in CE5?
  • From: Dan McCarty
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Zhiqiang Li
• Re: Platform Builder 5.0 Installation Difficulties
  • From: Paul G. Tobey [eMVP]
• Re: Serial Driver priority issue
  • From: Dean Ramsier
• Re: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0?
  • From: Dean Ramsier
• Re: BUILD ONLY COREDLL
  • From: alamy . liu
• Re: I need WinCE 4.2 Evulation Edition product key ..
  • From: alamy . liu
• Re: Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention)
  • From: Paul G. Tobey [eMVP]
• Re: Problem in writing to SD control register
  • From: alamy . liu
• Re: Windows CE memory release
  • From: Paul G. Tobey [eMVP]
• Serial Driver priority issue
  • From: ydlu
• Re: BUILD ONLY COREDLL
  • From: Paul G. Tobey [eMVP]
• Re: Why can not WINCE6.0 Eval install package can not be downloaded?
  • From: Paul G. Tobey [eMVP]
• Re: disabling reverse DNS for the web server
  • From: John S.
• Re: GWES crash when loading displaydriver from harddisk
  • From: Valter Minute
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Zhiqiang Li
• Re: I need WinCE 4.2 Evulation Edition product key ..
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: I need WinCE 4.2 Evulation Edition product key ..
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Determine if SignalStarted is called
  • From: Dan McCarty
• Re: GWES crash when loading displaydriver from harddisk
  • From: Valter Minute
• Re: Problem in writing to SD control register
  • From: Valter Minute
• Problem in writing to SD control register
  • From: Chitra
• Re: WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• Re: Serial Connection over USB
  • From: Henrik Viklund
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Zhiqiang Li
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: <ctacke/>
• How can start my thread(A) over again from its entry point instead of where it is stop when it is preempted by another thread(B) with a higher priority
  • From: Zhiqiang Li
• Re: Is Postlink.bat functional in CE 6.0?
  • From: Valter Minute
• How to convert the cec file for ce5.0 to the pbcxml file for ce6.0?
  • From: David.H, Deng
• Re: Multiple Language Support - eVC++
  • From: Shanmug
• BUILD ONLY COREDLL
  • From: Miky
• Re: What's the usage of this ARM assembly instruction?
  • From:
• Config.bib error? help
  • From: Jesse
• Re: PB install question ..
  • From: Anthony Pellerin
• Re: What's the usage of this ARM assembly instruction?
  • From: Nokia_E61i : I am waiting for you!!!!!!
• WinCE50 crashes while the Calibration.exe is running
  • From: Dogfu
• Re: Windows CE memory release
  • From: Mams
• Re: Trouble resolving CEFilter error
  • From: Treadstone
• Why can not WINCE6.0 Eval install package can not be downloaded?
  • From: Nokia_E61i : I am waiting for you!!!!!!
• Re: display : bottom lines was shown at top
  • From: Silver
• Re: What's the usage of this ARM assembly instruction?
  • From: Silver
• Window CE VLAN support
  • From: CiticPacific
• What's the usage of this ARM assembly instruction?
  • From: Nokia_E61i : I am waiting for you!!!!!!
• my build process and error
  • From: Mike C
• WinCE Update releases for the month of March 2007
  • From: QFEAdmin \(MS\)
• Re: Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention)
  • From: Paul G. Tobey [eMVP]
• Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention)
  • From: Tom
• Re: Trouble resolving CEFilter error
  • From: K. S. Huang
• display : bottom lines was shown at top
  • From: kendai
• Re: Is Postlink.bat functional in CE 6.0?
  • From: Dean Ramsier
• Re: No Debug messages while Using Atatic IP
  • From: Paul G. Tobey [eMVP]
• Re: Windows CE memory release
  • From: Paul G. Tobey [eMVP]
• Re: About IE binding on Windows Mobile 5
  • From: Paul G. Tobey [eMVP]
• Trouble resolving CEFilter error
  • From: Treadstone
• Re: Problem faced while porting BSP to WinCE 6.0
  • From: Treadstone
• Re: parameter range checking
  • From: Dean Ramsier
• Re: location of CE's vector table
  • From: Dean Ramsier
• Windows CE memory release
  • From: Mams
• Re: Where is MMU TLB placed at wince?
  • From: Dean Ramsier
• Re: How to share varible in a driver
  • From: CiticPacific
• RE: USB HCD for SH7760
  • From: George H.
• Re: parameter range checking
  • From: nihar
• Where is MMU TLB placed at wince?
  • From: Jesse
• Test Post!
  • From: Nokia_E61i - I am waiting U.
• Re: location of CE's vector table
  • From: gdj
• Re: No Debug messages while Using Atatic IP
  • From: anand
• Re: sysgen error
  • From: anand
• VirtualPC 7 - CEPC
  • From: Thomas
• Re: parameter range checking
  • From: nihar
• Re: error when doing clean sysgen of new CEPC platform
  • From: Michel Verhagen (eMVP)
• Re: Keyboard lag ... on Windows CE 5.0
  • From: Arnie
• error when doing clean sysgen of new CEPC platform
  • From: Marty
• Re: No Debug messages while Using Atatic IP
  • From: Paul G. Tobey [eMVP]
• Re: USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Paul G. Tobey [eMVP]
• Re: Problem in displaying OS image in LCD
  • From: Anthony Pellerin
• Re: Data abort Exception after downloading OS
  • From: Anthony Pellerin
• Re: disabling reverse DNS for the web server
  • From: John S.
• Re: SQL Server 2005 Compact Edition
  • From: Dean Ramsier
• Re: A new device type for SD/MMC card winCE
  • From: Dean Ramsier
• Re: parameter range checking
  • From: Dean Ramsier
• parameter range checking
  • From: nihar
• Problem faced while porting BSP to WinCE 6.0
  • From: Treadstone
• WinCE 4.2 2K Nand Flash got cut/paste problem
  • From: Hong Feng
• Re: A new device type for SD/MMC card winCE
  • From: anand
• Re: ActivateDeviceEx() fails...
  • From: Remi de Gravelaine
• Re: No Debug messages while Using Atatic IP
  • From: anand
• Data abort Exception after downloading OS
  • From: kracks
• Re: USB mass storage issue
  • From: Henrik Viklund
• Re: USB mass storage issue
  • From: aman
• Poor performance of diskcache.dll?
  • From: Hermes
• Re: Graphedt For Windows CE 5.0
  • From: Damon Barry [MSFT]
• Re: location of CE's vector table
  • From: Dean Ramsier
• Re: location of CE's vector table
  • From: gdj
• Re: [WinCE 5.0] How-to disable idle modes...
  • From: Sparks
• Re: where is excetion vectors table placed at sdram ?
  • From: Dean Ramsier
• Re: location of CE's vector table
  • From: Dean Ramsier
• Re: Image Binary Format
  • From: Dean Ramsier
• Re: Multiple Language Support - eVC++
  • From: Shanmug
• Re: Problem launching Device Emulator
  • From: Chitra
• Re: USB Activesync Autoconnect
  • From: samy . sanjay
• Re: How to build SDK with sample programs
  • From: Alan Green
• ActivateDeviceEx() fails...
  • From: Reiner Ziegler
• Re: Problem in displaying OS image in LCD
  • From: kracks
• Re: Problem in displaying OS image in LCD
  • From: kracks
• Re: GIISR.DLL timestamp of module does not match timestamp of local mo
  • From: Doug Cook [MSFT]
• Re: location of CE's vector table
  • From: Ross Jordan [MSFT]
• Re: Suspend/resume - exception on resume
  • From: Hermes
• Re: disabling reverse DNS for the web server
  • From: John Spaith [MS]
• Re: Suspend/resume - exception on resume
  • From: David Liao \(MS\)
• Re: Loading a driver from other driver
  • From: Valter Minute
• Re: Loading a driver from other driver
  • From: Micheal
• Re: Loading a driver from other driver
  • From: Paul G. Tobey [eMVP]
• Re: Problem in displaying OS image in LCD
  • From: Paul G. Tobey [eMVP]
• Re: Problem launching Device Emulator
  • From: Barry Bond [MSFT]
• Loading a driver from other driver
  • From: Micheal
• Re: USB Activesync Autoconnect
  • From: Graeme
• Re: Why GPIO1 cannot wake up pxa270?
  • From: shofar
• Problem launching Device Emulator
  • From: Chitra
• Problem in displaying OS image in LCD
  • From: kracks
• where is excetion vectors table placed at sdram ?
  • From: Jesse
• Re: Show "Chinese Font" in English OS image?
  • From: shofar
• Show "Chinese Font" in English OS image?
  • From: Dogfu
• Re: Why GPIO1 cannot wake up pxa270?
  • From: shofar
• Why GPIO1 cannot wake up pxa270?
  • From: shofar
• problem with display driver
  • From: Tom
• Re: Hard Disk vs USB drive
  • From: Bill T
• Re: question about thread scheduling
  • From: wrani
• Re: How to share varible in a driver
  • From: wrani
• Suspend/resume - exception on resume
  • From: Hermes
• Re: Initialized variables are not working when built using PB
  • From: Manjunath
• Re: Initialized variables are not working when built using PB
  • From: Bruce Eitman [eMVP]
• Re: Customizing the GPIOs, Interrupt etc
  • From: wrani
• Re: Initialized variables are not working when built using PB
  • From: Manjunath
• Re: Wi-Fi Application
  • From: Dan McCarty
• Re: QFE for Windows CE .NET 4.2
  • From: <ctacke/>
• Re: WZCSVC cannot restore preferred network
  • From: Paul G. Tobey [eMVP]
• Re: USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Paul G. Tobey [eMVP]
• Re: S.O.S Direct3D reference driver
  • From: Don Crouch
• Re: No Debug messages while Using Atatic IP
  • From: Paul G. Tobey [eMVP]
• Re: QFE for Windows CE .NET 4.2
  • From: Paul G. Tobey [eMVP]
• Re: Multiple Language Support - eVC++
  • From: Chris L
• Re: Initialized variables are not working when built using PB
  • From: Bruce Eitman [eMVP]
• Re: Initialized variables are not working when built using PB
  • From: Manjunath
• Re: Initialized variables are not working when built using PB
  • From: Bruce Eitman [eMVP]
• Re: WZCSVC cannot restore preferred network
  • From: <ctacke/>
• Re: Export an ARM SDK
  • From: Dean Ramsier
• Re: Hard Disk vs USB drive
  • From: Bruce Eitman [eMVP]
• Re: Wi-Fi Application
  • From: <ctacke/>
• Re: Hard Disk vs USB drive
  • From: <ctacke/>
• Re: [q] GetCursorPos() function retuns FALSE.
  • From: Bruce Eitman [eMVP]
• Re: Initialized variables are not working when built using PB
  • From: Bruce Eitman [eMVP]
• Re: Problem in Launching OS after downloading via USB
  • From: Bruce Eitman [eMVP]
• Re: Export an ARM SDK
  • From: Bruce Eitman [eMVP]
• Re: How to export MBR's 2nd partition as USBFN Mass Storage?
  • From: Henrik Viklund
• Hard Disk vs USB drive
  • From: Skin Diver
• A new device type for SD/MMC card winCE
  • From: Tashi
• Wi-Fi Application
  • From: rahul_patharkar2004
• Problem in Launching OS after downloading via USB
  • From: kracks
• Problem in Launching OS via USB
  • From: kracks
• No Debug messages while Using Atatic IP
  • From: anand
• Re: Multiple Language Support - eVC++
  • From: Shanmug
• Re: CE6 real-time problem
  • From: Remi de Gravelaine
• Re: How to export MBR's 2nd partition as USBFN Mass Storage?
  • From: C Hecko
• Re: [q] GetCursorPos() function retuns FALSE.
  • From: Ulrich Eckhardt
• Re: fail to build csp_pxa27x from another directory
  • From: vcn
• Re: Export an ARM SDK
  • From: Jack
• Re: where to set PM_PM_PDA_PDD variable?
  • From: shofar
• Re: USB massstorage
  • From: nihar
• USB Activesync Autoconnect
  • From: Jules . Karim
• disabling reverse DNS for the web server
  • From: John S.
• Re: About mmu setup & 1st level page table
  • From: Silver
• Re: fail to build csp_pxa27x from another directory
  • From: Bruce Eitman [eMVP]
• Re: How to install two identical USB modems in WinCE 5.0?
  • From: David Liao \(MS\)
• Re: Question about httpd and ftpd ..
  • From: John Spaith [MS]
• Re: USB massstorage
  • From: Henrik Viklund
• Re: fail to build csp_pxa27x from another directory
  • From: vcn
• Re: WZCSVC cannot restore preferred network
  • From: Bruce Eitman [eMVP]
• Re: WZCSVC cannot restore preferred network
  • From: Paul G. Tobey [eMVP]
• Re: Export an ARM SDK
  • From: Bruce Eitman [eMVP]
• Re: where to set PM_PM_PDA_PDD variable?
  • From: Dean Ramsier
• Re: USB massstorage
  • From: Dean Ramsier
• Re: How to disconnect ActiveSync to suspend
  • From: Graeme
• Re: Which function can hide a partiton in WinCE 4.2?
  • From: Graeme
• Re: Export an ARM SDK
  • From: Jack
• Re: Export an ARM SDK
  • From: Bruce Eitman [eMVP]
• Re: fail to build csp_pxa27x from another directory
  • From: Bruce Eitman [eMVP]
• Export an ARM SDK
  • From: Jack
• Re: USB massstorage
  • From: nihar
• Re: Bug in signed-overflow of (unsigned) Tick-Counter ?
  • From: Marc-Oliver Westerburg
• Problem in USB downloading from Eboot.
  • From: kracks
• Re: USB massstorage
  • From: Henrik Viklund
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Amjad \(MSFT\)
• fail to build csp_pxa27x from another directory
  • From: vcn
• Re: S.O.S Direct3D reference driver
  • From: maite
• Re: USB massstorage
  • From: nihar
• where to set PM_PM_PDA_PDD variable?
  • From: shofar
• About mmu setup & 1st level page table
  • From: Jesse
• Re: CERTMOD. How to?
  • From: Ross Jordan [MSFT]
• Re: Keyboard lag ... on Windows CE 5.0
  • From: Michel Verhagen (eMVP)
• Re: capturing system.hv
  • From: Michel Verhagen (eMVP)
• Re: Keyboard lag ... on Windows CE 5.0
  • From: Paul G. Tobey [eMVP]
• Re: S.O.S Direct3D reference driver
  • From: Michel Verhagen (eMVP)
• Re: how to build a modified code under "my platform"
  • From: Michel Verhagen (eMVP)
• Keyboard lag ... on Windows CE 5.0
  • From: Arnie
• Re: Does Win CE 5.0 support GPS (global positioning system) ??
  • From: John Spaith [MS]
• problem with display
  • From: Tom
• Re: Bug in signed-overflow of (unsigned) Tick-Counter ?
  • From: Dean Ramsier
• Re: NDISUIO Problem Upon Resume
  • From: Dan McCarty
• NDISUIO Problem Upon Resume
  • From: Keaven Pineau
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Java on WinCE ?
  • From: Blake
• S.O.S Direct3D reference driver
  • From: maite
• Atapi prob once again...
  • From: Mekas
• Re: capturing system.hv
  • From: Bruce Eitman [eMVP]
• Re: selecting one of different driver implementations
  • From: Bruce Eitman [eMVP]
• Re: Putting wince in sleep mode
  • From: Dean Ramsier
• Re: myproject\cesysgen\oak\lib\armv4i\retail directory missing
  • From: Dean Ramsier
• Re: USB massstorage
  • From: Dean Ramsier
• Re: question about thread scheduling
  • From: Dean Ramsier
• Re: How to hide a partition?
  • From: Sniper167
• Re: Does Win CE 5.0 support GPS (global positioning system) ??
  • From: Aditi
• Re: USB massstorage
  • From: nihar
• Re: Download WinCE Image over USB
  • From: Valter Minute
• Download WinCE Image over USB
  • From: Bernie
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: How to hide a partition?
  • From: Erwin Zwart
• Re: selecting one of different driver implementations
  • From: Ulrich Eckhardt
• Re: USB massstorage
  • From: Henrik Viklund
• USB massstorage
  • From: nihar
• USB massstrage
  • From: nihar
• myproject\cesysgen\oak\lib\armv4i\retail directory missing
  • From: yuanfei.work@xxxxxxxxx
• Re: How to hide a partition?
  • From: Sniper167
• Re: Customizing the GPIOs, Interrupt etc
  • From: soreeye
• Re: selecting one of different driver implementations
  • From: Bruce Eitman [eMVP]
• Re: selecting one of different driver implementations
  • From: Bruce Eitman [eMVP]
• Re: How to edit registry on WinCE ?
  • From: Amjad \(MSFT\)
• Re: Connectivity Options... failed
  • From: Amjad \(MSFT\)
• Re: Does Win CE 5.0 support GPS (global positioning system) ??
  • From: John Spaith [MS]
• selecting one of different driver implementations
  • From: Ulrich Eckhardt
• Re: How to build SDK with sample programs
  • From: Paul G. Tobey [eMVP]
• Re: How to build a modified the code under the directory \platform
  • From: Paul G. Tobey [eMVP]
• Re: SD WiFi + Resume
  • From: Keaven Pineau
• Re: Customizing the GPIOs, Interrupt etc
  • From: wrani
• Re: What is placed at the first 4k of eboot.nb0 by romimage?
  • From: wrani
• Re: how to build a modified code under "my platform"
  • From: Bruce Eitman [eMVP]
• Re: What is placed at the first 4k of eboot.nb0 by romimage?
  • From: Bruce Eitman [eMVP]
• CETK One-Card Network Card Miniport Driver Test CASE 11+
  • From: David Schneider
• Re: Integrating drivers into WinCE5.0 Image
  • From: Bruce Eitman [eMVP]
• Re: How to share varible in a driver
  • From: Bruce Eitman [eMVP]
• Re: Customizing the GPIOs, Interrupt etc
  • From: Bruce Eitman [eMVP]
• Re: How can I write my data to the first 4k of eboot.nb0 when generated by rominage?
  • From: Bruce Eitman [eMVP]
• Re: how to build a modified code under "my platform"
  • From: Erwin Zwart
• Re: how to build a modified code under "my platform"
  • From: nick.lin
• Re: CF detect on mainstone PXA270 based board
  • From: Marco Contenti
• LSP on PocketPC 2003
  • From: Piotr Wojcicki
• RE: touchscreen/stylus problems
  • From: Ulrich Eckhardt
• Re: how to build a modified code under "my platform"
  • From: Erwin Zwart
• Re: What is placed at the first 4k of eboot.nb0 by romimage?
  • From: Erwin Zwart
• Re: How to hide a partition?
  • From: Erwin Zwart
• How to hide a partition?
  • From: Sniper167
• Re: How to share varible in a driver
  • From: Helge Kruse
• Re: Binding Network to COM Port
  • From: Luc Cool
• Re: WinCE5.0 DOS boot takes quite long a time
  • From: Samuel Phung \(eMVP\)
• How to share varible in a driver
  • From: CiticPacific
• Re: Customizing the GPIOs, Interrupt etc
  • From: soreeye
• What is placed at the first 4k of eboot.nb0 by romimage?
  • From: Jesse
• Re: how to build a modified code under "my platform"
  • From: Michel Verhagen (eMVP)
• Re: USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: portnawake
• Re: Integrating drivers into WinCE5.0 Image
  • From: Blake
• Re: How to export MBR's 2nd partition as USBFN Mass Storage?
  • From: 阿隆西
• Re: Mass Storage gets slow after eraseing/copying files for many times.
  • From: C Hecko
• Re: s3c2440 ce5 suspend and awake
  • From: C Hecko
• Re: How to export MBR's 2nd partition as USBFN Mass Storage?
  • From: C Hecko
• RE: nk.nb0
  • From: Joseph F
• Re: Putting wince in sleep mode
  • From: Joseph F
• Re: serial port problem : no Rx Interrupt
  • From: Joseph F
• Re: CERTMOD. How to?
  • From: Joseph F
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Michael Chen [MS]

• Windows
• Science
• Usenet

• Archive
• About
• Privacy
• Search
• Imprint