ActiveSync over USB works fine on my S3C2440 platform, with a quirk: when
suspending, I don't know how to tell AutoRas that we must disconnect. The
result is that AutoRas thinks it is connected through suspend and only when
the system resumes I see the message "AUTORAS:: Dialer notifies: [2] [Dialer
Terminate]", but after that the connection doesn't work, even if the USB
driver is working correctly. If I then suspend/resume once more, ActiveSync
works again.
One workaround I found is that if on resume I delay enabling the GPIO-driven
pull-up on D+ signal of USB slave by a few seconds, then AutoRas has enough
time to disconnect properly. Once the pull-up is engaged, I see the
connection messages and ActiveSync is fine. I am talking about a delay of
about 3 seconds, which is really big. I am launching a thread on transition
to D0 just to handle this delay.
Re: Cant synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt ... Let's stick with the driver first...Device Mgr 1.0 ...activesync, I see the mobile pc plug&play pop-up. ... In Network Connections, I see Windows Mobile-based Device, no firewall, no ... Under USB controllers,... (microsoft.public.pocketpc.activesync)
Re: Cant synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt ... it's monitoring network traffic, which is what the USB traffic with the ...Activesync 4.1, turning off the Windows firewall and my Norton ... When you plug in a PnP USB device... Don't you think that refers to just the driver?... (microsoft.public.pocketpc.activesync)
Re: ActiveSync 4.1 Still does not work... ... AS4.1 installs some USB...ActiveSync, then allowing Windows to find it again. ... in the system tray for the new 'network adapter' with the 'acquiring network ... If everything seems to be set correctly, but no connection is established, ... (microsoft.public.pocketpc.activesync)
Re: Activesync 4.1 - WM 5.0 WORKING ... The same USB dockstation worked OK in a Notebook where I used ... With the other computer the sync works once every 25 tries... ... When I see so many people with problems with Activesync 4.X and ... 04.cap - ActiveSync does Connecting-Connected-Looking for changes and 20 ... (microsoft.public.pocketpc.activesync)
Re: Activesync 4.1 - WM 5.0 WORKING ... The same USB dockstation worked OK in a Notebook where I used ... With the other computer the sync works once every 25 tries... ... When I see so many people with problems with Activesync 4.X and ... 04.cap - ActiveSync does Connecting-Connected-Looking for changes and 20 ... (microsoft.public.pocketpc.activesync)
