Re: eboot and FFUART

Tech-Archive recommends: Fix windows errors by optimizing your registry

How do we check that it is not loaded, at the eboot or wince portion?
If we don't load the driver, can we still use the FFUART for other purpose?

K. S. Huang wrote:
Make sure your serial driver is *not* loaded for FFUART port or it will conflict with the debug port.

"soreeye" <soreeye@xxxxxxxxxxx> ???????:ea%23pVrOcHHA.1220@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have the OS booted up successfully with the BTUART as the debug UART, under mainstone III.

However, when I configure the FFUART as the debug UART under eboot menu, the OS hangs at
"NDIS: PcmciaNeedsMapToScrap = 0"
or
"Loaded symbols for "......\VMINI.DLL"

Anyone can advise on where to look for the problem.


Thanks


.

Relevant Pages

  • Re: EBOOT Query
    ... The default serial port for output on this BSP is the BTUART and not the ... FFUART, so you could try setting the dwDbgSerPhysAddr of the EBootCFG to ... > EBOOT implementation is in the Startup.s. ... > Any help in this regard would be highly appreciated! ...
    (microsoft.public.windowsce.platbuilder)
  • eboot and FFUART
    ... I have the OS booted up successfully with the BTUART as the debug UART, under mainstone III. ... However, when I configure the FFUART as the debug UART under eboot menu, the OS hangs at ...
    (microsoft.public.windowsce.platbuilder)