Re: Creating a Workspace from the Command-Line
- From: "cmarin" <c..@xxxxxxx>
- Date: Sat, 24 Mar 2007 12:30:11 +0100
Hi ,
I set _ECHOON=1, and then run wince.bat and I get following:
C:\WINCE600>set WINCEEMULATION=
C:\WINCE600>if exist C:\WINCE600\platform\CCX9C\CCX9C.bat call
C:\WINCE600\platform\CCX9C\CCX9C.bat
The system cannot find the path specified.
WARNING: The platform you are trying use was last used in conjunction
with a different project. To ensure correctness of the build, the next time
you run CEBUILD, the platform project will be rebuilt from clean. This
message
is for informational purposes only, no action is required on your part.
In my system I have file C:\WINCE600\platform\CCX9C\CCX9C.bat, and it works
OK when I use PB6.0 IDE.
What path can not be found?
Am I missing some step?
Thanks for your help
"Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx> escribió en el
mensaje news:OpJNdPXbHHA.264@xxxxxxxxxxxxxxxxxxxxxxx
Try this before calling wince.bat
set _ECHOON=1
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"cmarin" <c..@xxxxxxx> wrote in message
news:O7oHJJXbHHA.4476@xxxxxxxxxxxxxxxxxxxxxxx
I notice that after run wince.bat (see previous post) all my variables are
referenced to C:\wince600\public\<My project> instead of
C:\wince600\osdesign\<My project>
See output:
C:\WINCE600>call %_WINCEROOT%\PUBLIC\common\oak\misc\wince.bat ARMV4I
Test CCX9C
_WINCEDRIVE=C:
_PROJPUBLICROOT=\WINCE600\PUBLIC
The system cannot find the path specified.
WARNING: The platform you are trying use was last used in conjunction
with a different project. To ensure correctness of the build, the next
time
you run CEBUILD, the platform project will be rebuilt from clean. This
message
is for informational purposes only, no action is required on your part.
Wince ARMV4I Test CCX9C Development Environment for SA
C:\WINCE600>set
_PROJECTDDKROOT=C:\WINCE600\public\Test\ddk
_PROJECTOAKROOT=C:\WINCE600\public\Test\oak
_PROJECTROOT=C:\WINCE600\public\Test
_PROJECTSDKROOT=C:\WINCE600\public\Test\sdk
_PROJPUBLICROOT=\WINCE600\PUBLIC
_PUBLICDRIVE=C:
_PUBLICROOT=C:\WINCE600\public
_SDKROOT=C:\WINCE600\sdk
_TARGETPLATROOT=C:\WINCE600\platform\CCX9C
_TGTCPU=ARMV4I
_TGTCPUFAMILY=ARM
_TGTCPUISA=V4I
_TGTOS=CE
_TGTPLAT=CCX9C
_TGTPROJ=Test
_TOOLSSDKDRIVE=C:
_TOOLSSDKROOT=C:\WINCE600\tools\public\ext
_WINCECALLED=1
_WINCEDRIVE=C:
_WINCEOSVER=600
_WINCEROOT=C:\WINCE600
C:\WINCE600>call %_WINCEROOT%\Public\CEBASE\mobile_handheld.bat
C:\WINCE600>call clearsysgenvars.bat
C:\WINCE600>blddemo -q
CEBUILD: Deleting old build logs
CEBUILD: Skipping directly to SYSGEN phase
Building dep trees: winceos dcom gdiex ie script servers shellsdk shell
rdp wces
hellfe wceappsfe directx voip datasync netcfv2 SQLCE cellcore ostest
speech Test
\wince600\public\CELLCORE Test\wince600\public
\OSTEST Test\wince600\public\SPEECH Test
CEBUILD: Running sysgen preproc (for COMMON)
Starting sysgen phase for project ( common )
ERROR: Project specific cesysgen.bat not found. Please create a
cesysgen.bat in C:\WINCE600\public\Test\oak\misc
What is wrong???
I have followed steps explained in:
http://msdn2.microsoft.com/en-us/library/aa448501.aspx
Are that instutions valid for Windows CE 6.00??
Does anybody have inforamtion/examples about PBXMLUTILS.exe, to crate a
PB project from cmd line?
Thanks!
"Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx> escribió en
el mensaje news:OpB%23xlWbHHA.4772@xxxxxxxxxxxxxxxxxxxxxxx
And what was the error?
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"cmarin" <c..@xxxxxxx> wrote in message
news:e7T0p2VbHHA.4552@xxxxxxxxxxxxxxxxxxxxxxx
Hi all,
I am trying to reate a platform builder 6.o project using command line
tools.
I am using wince.bat but I get an error.
Steps I have done are folowing:
cd c:\WINCE600\PUBLIC\COMMON\OAK\MISC_WINCEDRIVE=C:
set _WINCEROOT=C:\WINCE600
set
_FLATRELEASEDIR=C:\WINCE600\OSDesigns\Test\RelDir\ConnectCore_9C_Wi-9C_ARMV4I_Release
set _PROJECTROOT=C:\WINCE600\OSDesigns\Test\Wince600\CCX9C_ARMV4I
set PBWORKSPACEROOT=C:\WINCE600\OSDesigns\Test
call %_WINCEROOT%\PUBLIC\common\oak\misc\wince.bat ARMV4I Test CCX9C
_PROJPUBLICROOT=C:\WINCE600\OSDesigns\Test\WINCE600\PUBLIC
The system cannot find the path specified.
WARNING: The platform you are trying use was last used in conjunction
with a different project. To ensure correctness of the build, the next
time
you run CEBUILD, the platform project will be rebuilt from clean. This
message
is for informational purposes only, no action is required on your part.
Wince ARMV4I Test CCX9C Development Environment for TEMM
C:\WINCE600>
I have try the same steps but without set PBWORKSPACEROOT and I get a
error.
What I am doing wrong?
I ahve followed steps explaind in
http://msdn2.microsoft.com/en-us/library/aa448501.aspx, but it is for
Windoes CE 5.0, and seems does not work. I do not know.
Thanks for your help!
.
- Follow-Ups:
- Re: Creating a Workspace from the Command-Line
- From: Bruce Eitman [eMVP]
- Re: Creating a Workspace from the Command-Line
- References:
- Creating a Workspace from the Command-Line
- From: cmarin
- Re: Creating a Workspace from the Command-Line
- From: Bruce Eitman [eMVP]
- Re: Creating a Workspace from the Command-Line
- From: cmarin
- Re: Creating a Workspace from the Command-Line
- From: Bruce Eitman [eMVP]
- Creating a Workspace from the Command-Line
- Prev by Date: Re: How to set up Platform Builder and Lauterbach
- Next by Date: Re: CE5.0 Command line tools
- Previous by thread: Re: Creating a Workspace from the Command-Line
- Next by thread: Re: Creating a Workspace from the Command-Line
- Index(es):
Relevant Pages
|
