Re: question about thread scheduling

my control thread is triggered only once, not many times(after I have used
flag FOREVER to remove the while(!pISTStruct->abort){} statement). So, I
still have problems with rescheduling.
have changed my program to:
DWORD WINAPI OptimizationThread( LPVOID lpvParam )
{
// Do all interrupt processing to complete the interaction
// with the board so we can receive another interrupt.
ISTStruct* pISTStruct=(ISTStruct*)lpvParam ;
SYSTEMTIME st;
#ifdef FOREVER
while(!pISTStruct->abort){
#endif
//wait for the 4ms timer interrupt event...
#ifdef SYNCHR_EVENT
WaitForSingleObject(pISTStruct->hEvent, INFINITE);
#endif
if(pISTStruct->abort){
return 0;
}
GetSystemTime(&st);
DEBUGMSG(TRUE, (L"Current SystemTime%d \r\n", st.wMilliseconds));
#ifdef SYNCHR_EVENT
InterruptDone(SYSINTR_SOFT4MS);
#endif
#ifdef FOREVER
}
#endif
return 1;
}
I also modify the code inside "ULONG PeRPISR(void) " in fwpc.c to enforce it
to return SYSINTR_RESCHED(here FLAG_4MS is defined somewhere in oal_timer.h
as" #ifndef FLAG_4MS #define FLAG_4MS #endif"):
#ifdef FLAG_4MS
//for the scheduler to reschedule every 4ms
ulRet = SYSINTR_RESCHED;
#endif

I also have problems with debugging code inside PeRPISR(void), I can not
perform actions like step into, and so on.
For example, when I attach the device, the only available item under Debug
is Break All, and Stop Debugging. When I click on Break All, it leads me to
dbgbrk.c. Then I can click on Start, and nothing happened. I think there
must be something wrong with setting breakpoint inside PeRPISR(void), there
is only circle with a mark on the line, not a filled point.

thanks in advance
Zhiqiang
"voidcoder" <voidcoder@xxxxxxxxx> schrieb im Newsbeitrag
news:%23IS6h0ZaHHA.1220@xxxxxxxxxxxxxxxxxxxxxxx

Aren't you, by chance, debug printing every 4ms
from your thread?


Zhiqiang Li wrote:
thanks for your reply.
Now I am just considering getting one thread running every 4ms, later I
will divide my work into more threads, as you have suggested.

I have got a lot of same debug message, it seems that now the thread is
rescheduled. But after launching the remote kernel tracker, my debub
messages disappear. And I do not know why.


"Henrik Viklund" <henrik.viklund@xxxxxxxxx> schrieb im Newsbeitrag
news:1174209635.140915.224560@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On 17 Mar, 11:12, "Zhiqiang Li" <zhiqiang...@xxxxxxxxxx> wrote:
Hi Remi,
thanks for your advice.
Let me tell you what I exactly want to do:

In essential, it is a control problem, and I must send a voltage to the
moter every 4ms(this can be configured to another value in other cases),
and
this voltage is calculated through a process model, which is based on
neural
network. During the 4ms, I must use the CUP resource as much as
possible,
since algorithms on neural networks are always computational intensive,
and
I have to stop my calculation before is reach the 4ms deadline, so I am
afraid that I can not use any sleep function to kill the precious CPU
time:)

Um, sounds like you've not grasped all of the fundamentals of
multitasking (or I have totally misunderstood what you're trying to
do). If you have enough cycles to make a 4ms deadline it should be
trivial to achieve what you need using a couple of threads and
Sleep(...). If the NN run in a different thread as the control loop
you simply schedule the control loop with a higher priority than the
NN loop. If they run in the same thread, you could just create a pace-
thread that signals an event every 4 ms (using Sleep(...)) that the
control/NN thread wait for. When trigged, the ctrl thread run to
completion and go back to waiting for the event again.

Henrik Viklund
http://www.addlogic.se

I am using CE 6.0 on a CEPC, and I have modifid the value of
g_dwBSPMsPerIntr to 4, so that it will generate an timer interrupt every
4ms. I found that if I want to let the scheduler run also every 4ms, I
have
to modify the code inside "PeRPISR", so that it will generated a
SYSINTR_RESCHED every 4ms.

I am now study this source code, and trying to modify it to meet my
requirement.

best wishes
Zhiqiang
"Remi de Gravelaine" <gravelaine at aton dash sys dot fr> schrieb im
Newsbeitragnews:OHk45G9ZHHA.4520@xxxxxxxxxxxxxxxxxxxxxxx



Zhiqiang,
You should try to tell us *exactly* what you want to do.
You should also avoid multiplying the discussion threads if you want
people to take care of you from the beginning.
If I understood what you want to do, you have implemented a polling
loop
to do some job (what kind of job?) every 4ms.
You have put this loop in a high-priority thread started by the
XXX_Init
function of a stream driver.
You are using CE 6.0 on a CEPC.
The loop should thus look like:
while (!g_bSuicide)
{
Sleep(3);
<do some job>
}
There is no reason that such a loop exits except when g_bSuicide is set
to
TRUE (something that can be done in XXX_Deinit) or the <do some job>
code
executes a break of goto intruction.
Now, why Sleep(3) instead of Sleep(4)? Because Sleep(3) will sleep for
*at
least* 3 ms and because Sleep is synchonized on timer ticks, that fire
every ms (producing the SYSINTR_RESCHED you are focusing on.) So,
Sleep(3)
returns from sleeping right after the third tick and a new 1ms slice
begins. You <do some job> during a portion of this slice and reenter
Sleep(3). Sleep(3) puts your thread to sleep for 3 timer ticks and that
means the time remaining in the current tick + 3 ms.
HTH
Remi- Dölj citerad text -
- Visa citerad text -



.

Relevant Pages

  • Re: You are my hope. Please
    ... >>> I'm working on my thesis and I'm porting a software from fortran to C. ... some code jumps out of a DO loop. ... Keeping in mind where the flow of control goes, ... ENDIF ...
    (comp.lang.fortran)
  • Re: Slope Compensation and Vodka
    ... > | IIRC its associated with the sampled-data nature of the overall ... > | loop, which the standard linear analysis conveniently ignores. ... the real circuit for a control loop analysis, ... It all seems to boil down to the "choice" of modulator transfer ...
    (sci.electronics.design)
  • Re: Exploring the FOPDT Model With a Parameter Sensitivity Study
    ... primary focus is on PID control and related architectures. ... PID loops and from 50 to over 1000 measurements. ... A control person seeking to tune a loop 'might' ... And I know my posts on this newsgroup announcing the publication of the ...
    (sci.engr.control)
  • Re: The Cascade Control Architecture - controlguru post
    ... performance are cascade control and feed forward with feedback trim. ... literally nest a secondary control loop inside a primary loop as ... you _cannot_ improve the disturbance ...
    (sci.engr.control)
  • RE: New to VBA, Search for hole in numeric value using string as a cri
    ... You are setting the control to true and never checking for it's ... Then loop through those looking for the gap in numbers. ... > Dim tcrNum As Integer ... > Dim tcrPull As Integer ...
    (microsoft.public.access.formscoding)