Re: Webcam :-(

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Or you can look at the driver as a sample (which is what it is, not a
production grade driver with support for free), actually learn how it works
and then maybe make the necessary modifications for it to work with your
hardware. Just a suggestion.


--
Chris Tacke - Embedded MVP
OpenNETCF Consulting
Managed Code in the Embedded World
www.opennetcf.com
--


"Raheem" <Raheem@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9FF579A8-2113-4910-AA19-226B64F9654B@xxxxxxxxxxxxxxxx
New Logitech cams do not work with Webcam Driver and you should not add
anything to registry setting. Driver gets installed itself when you give
WebCam.dll in dialog box. I have tried working with new webcams but do not
work.

One solution is, either driver should be updated or else to find old
webams.
I tried searching a lot for old webcam but didn't find. If you have any
information, pls share.

Bye

"Rob" wrote:

Hi,
Thanks for the reply.
Another question since you seem to be familiar with this driver :

Do I need to add something to registry (loadclients?) to make CE
recognize
the cam ?.
When I plug in the logitech Quickcam pro, it prompts me for a driver.
When I manually enter "webcam.dll" it does load.
I would expect the driver to come with these settings....

Greetings,
Rob.






"anonymous" wrote:

I used the driver there with a Logitech QuickCam Pro 5000 with no
issue.

You'll need to do a little investigation into your setup perhaps.
1) Do the cameras you want to use support the interfaces necessary for
the
driver ?
2) Does your host USB device support Isochronous transfers correctly
and
reliably ?
3) What error(s) do you get from the driver when you try to use your
camera(s) ?

I'm not aware of any other driver for Webcam and CE. When I went
looking,
this was all I saw (that was free).

"Rob" wrote:

Hi,
I tried :
http://www.gotdotnet.com/workspaces/messageboard/home.aspx?id=0eb87e35-13e4-4fa3-9fde-71e9136f47de

It does not work for the cams I have.
I cannot get the "old" quickcam 5000 pro, that does not seem to have
a
problem.

What is a working combination of Webcam + driver for CE ?

Greetings,
Rob.





.

Relevant Pages

  • [GIT]: Networking
    ... maintainer making a lot of changes to driver FOO. ... support for networking. ... iwl3945: Fix iwl3945 rate scaling. ... Fix build warning due to typo in %pI4 format changes. ...
    (Linux-Kernel)
  • [GIT]: Networking
    ... Make VLAN and MACVLAN drivers support multiqueue, ... Return type of net driver xmit routines is formalized into ... Lots of bluetooth fixes and cleanups from Marcel Holtmann ... Fix premature termination of FIN_WAIT2, ...
    (Linux-Kernel)
  • [GIT]: Networking
    ... RFKILL rewrite from Johannes Berg. ... IPV6 stateless autoconfig support for ISATAP, ... fix led bug when SW rfkill ... Add watchdog functionality to hfcmulti driver ...
    (Linux-Kernel)
  • Re: CD/DVD drive errors and lost ticks
    ... Try and pass ide=noprobe option to the kernel boot command line and see if that makes a difference first - may be that will allow the SATA/PATA drivers to claim the CDROM before IDE sees it. ... # ACPI Support ... # PCI Hotplug Support ... # Generic Driver Options ...
    (Linux-Kernel)
  • OPL3SA2: spin_is_locked on uninitialized spinlock
    ... I've found a lot of errors like this when loading the OPL3SA2 sound ... driver on my old Intel AL440LX computer, ... compile the kernel. ... # ACPI Support ...
    (Linux-Kernel)