USB 2.0 ports not working

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: "Mario" <trapule@xxxxxxxxxxxxxx>
Date: 2 Mar 2007 04:27:38 -0800

Hi all.
On my hardware there are 8 USB ports: 4 USB 2.0 and 4 USB 1.1.
The four USB 1.1 come from the Intel i815 chipset and are correctly
working.
For the USB 2.0 ports we are using a USB Host Controller, the Philips
ISP1563. I tried to add EHCI, OHCI and UHCI support to my CE image (in
several combinations) but these ports are never working. The drivers
are correctly loaded. Here follow the logs when I plug and unplug a
USB storage device to a USB 1.1 port (everything works) and the case
of USB 2.0 (not working).
Can anyone give any hint?

************************************************************************************************************************************************

Case 1 (USB 1.1 Port, correctly working):

4294797424 PID:477979d2 TID:4767ef5e 0x87679800: !!!Warning!!! Setting
resume/suspend/reset bits of USBCMD
4294797872 PID:477979d2 TID:4767ef5e 0x87679800: CHub(Root tier 0)::
ResumeNotification(0) !
4294797872 PID:477979d2 TID:4767ef5e 0x87679800: CHub(Root tier 0)::
ResumeNotification(0) !
4294797872 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::HubStatusChangeThread - port 1, change = 0x0001, status = 0x0101
4294797973 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::HubStatusChangeThread - device attached on port 1
4294797973 PID:477979d2 TID:a7677faa 0x87677dbc: +CHub(Root tier
0)::AttachDevice - port = 1, fIsLowSpeed = 0
4294797973 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0
4294797973 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0,
failures = 0
4294797973 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0
4294798035 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures =
0
4294798036 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0
4294798038 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0,
failures = 0
4294798049 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR,
failures = 0
4294798050 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0
4294798052 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures =
0
4294798052 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR,
failures = 0
4294798054 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0
4294798056 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE, failures = 0
4294798057 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - Select Configuration 0 on
DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step
4294798057 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG, failures = 0
4294798058 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION,
failures = 0
4294798058 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY,
failures = 0
4294798059 PID:477979d2 TID:a7677faa 0x87677dbc: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE,
failures = 0
4294798065 PID:477979d2 TID:a7677faa 0x87677dbc: >>> Loading module
usbmsc.dll at address 0x03770000-0x0377D000 (RW data at
0x01F79000-0x01F794E0)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\USBMSC.DLL'
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: +USBD:OpenPipe, EP:
0x81, MaxPkt: 64, Type: Bulk
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: -USBD:OpenPipe
success, hPipe = 5EAC0
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: +USBD:OpenPipe, EP:
0x2, MaxPkt: 64, Type: Bulk
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: -USBD:OpenPipe
success, hPipe = 5EBD0
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: +USBD:OpenPipe, EP:
0x83, MaxPkt: 2, Type: Interrupt
4294798090 PID:477979d2 TID:a7677faa 0x87677dbc: -USBD:OpenPipe
success, hPipe = 5ECE0
4294798092 PID:477979d2 TID:a7677faa 0x87677dbc: >>> Loading module
usbdisk6.dll at address 0x03760000-0x03770000 (RW data at
0x01F77000-0x01F7751C)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\USBDISK6.DLL'
4294798118 PID:477979d2 TID:a7677faa 0x87677dbc: DEVICE!
RegReadActivationValues RegQueryValueEx(Drivers\USB\ClientDrivers
\Mass_Storage_Class\6\BusPrefix) returned 2
4294798122 PID:477979d2 TID:a7677faa 0x87677dbc: Command Block Status:
Command Failed
4294798157 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294798157 PID:477979d2 TID:a7677faa 0x87677dbc:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294798157 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiTestUnitReady
ERROR:20
4294798192 PID:477979d2 TID:a7677faa 0x87677dbc: Command Block Status:
Command Failed
4294798231 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294798231 PID:477979d2 TID:a7677faa 0x87677dbc:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294798231 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiTestUnitReady
ERROR:20
4294798265 PID:477979d2 TID:a7677faa 0x87677dbc: Command Block Status:
Command Failed
4294798304 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294798304 PID:477979d2 TID:a7677faa 0x87677dbc:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294798304 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiTestUnitReady
ERROR:20
4294798340 PID:477979d2 TID:a7677faa 0x87677dbc: Command Block Status:
Command Failed
4294798379 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294798379 PID:477979d2 TID:a7677faa 0x87677dbc:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294798379 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiTestUnitReady
ERROR:20
4294798414 PID:477979d2 TID:a7677faa 0x87677dbc: Command Block Status:
Command Failed
4294798420 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294798420 PID:477979d2 TID:a7677faa 0x87677dbc:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294798420 PID:477979d2 TID:a7677faa 0x87677dbc: ScsiTestUnitReady
ERROR:20
4294798453 PID:77a0fce TID:47782b76 0x877cbc60:
AddToProcessInputLocaleTable: Added process to ProcessInputLocale
table, hProcess = 0x477979D2
4294798453 PID:47048dce TID:47782b76 0x877cbc60: [NOTIFY]
HandleSystemEvent 7 /ADD DSK1:
4294798479 PID:477979d2 TID:77a60aa 0x877c9800: Unsupported IOCTL:
0x71c24
4294798479 PID:477979d2 TID:77a60aa 0x877c9800: DSK_IOControl error:
50
4294798481 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
mspart.dll at address 0x03CD0000-0x03CD9000 (RW data at
0x01FD4000-0x01FD44B4)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\MSPART.DLL'
4294798501 PID:a77c9c1a TID:77a60aa 0x877c9800: Loading partition
driver mspart.dll hModule=86F8B198
4294798501 PID:a77c9c1a TID:77a60aa 0x877c9800: Driver mspart.dll
loaded
4294798570 PID:a77c9c1a TID:77a60aa 0x877c9800: Opened the store
hStore=00094700
4294798603 PID:a77c9c1a TID:77a60aa 0x877c9800: NumSec=255488
BytesPerSec=512 FreeSec=238 BiggestCreatable=238
4294798604 PID:a77c9c1a TID:77a60aa 0x877c9800: Partition Part00
NumSectors=255200
4294798604 PID:a77c9c1a TID:77a60aa 0x877c9800: MSPART!
PD_OpenPartition: dwStoreId=00094700, PartName=Part00
4294798606 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
fatfsd.dll at address 0x03EA0000-0x03EC2000 (RW data at
0x01FF2000-0x01FF263C)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\FATFSD.DLL'
4294798629 PID:a77c9c1a TID:77a60aa 0x877c9800: FSD_MountDisk:
mounting volumes for hDsk=00095C60
4294798662 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!MountDisk:
BPB_HiddenSectors(50) != 0
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
access time updates disabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
event logging enabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
automatic scanning disabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
write verify disabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
extra FAT on format disabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
force write through enabled
4294798663 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
Codepage = 1
4294798664 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
Number of path cache entries = 50
4294798668 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
diskcache.dll at address 0x03E90000-0x03E96000 (RW data at
0x01FF0000-0x01FF04EC)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\DISKCACHE.DLL'
4294798690 PID:a77c9c1a TID:77a60aa 0x877c9800: CreateCache:
Successful. Cache Size: 124 KB, Start: 6, End: 503.
4294798690 PID:a77c9c1a TID:77a60aa 0x877c9800: CreateCache:
Successful. Cache Size: 249 KB, Start: 504, End: 255199.
4294798889 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!InitVolume: FAT
version: 16
4294798889 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!InitVolume:
Cluster Size (Sectors): 4
4294798924 PID:a77c9c1a TID:77a60aa 0x877c9800: FS: Registering file
system Hard Disk, index 7, flags 0x00000000
4294798924 PID:a77c9c1a TID:77a60aa 0x877c9800: FS: Mount complete
(Hard Disk, index 7, flags 0x00000000)
4294798979 PID:477979d2 TID:a7677faa 0x87677dbc: -CHub(Root tier
0)::AttachDevice - port = 1, fIsLowSpeed = 0, address = 1

*************************************************************************************************************************************************

Case 2 (USB 2.0 Port, not working):

4294874322 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::HubStatusChangeThread - port 1, change = 0x0001, status = 0x0501
4294874517 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::HubStatusChangeThread - device attached on port 1
4294874517 PID:477979d2 TID:c7662fb6 0x87662c3c: +CHub(Root tier
0)::AttachDevice - port = 1, fIsLowSpeed = 0
4294874517 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0
4294874517 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0,
failures = 0
4294874517 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0
4294874590 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures =
0
4294874614 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0
4294874614 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0,
failures = 0
4294874625 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR,
failures = 0
4294875127 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0
4294875239 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures =
0
4294875239 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR,
failures = 0
4294875240 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE, failures = 0
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - Select Configuration 0 on
DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG, failures = 0
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION,
failures = 0
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY,
failures = 0
4294875753 PID:477979d2 TID:c7662fb6 0x87662c3c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE,
failures = 0
4294875760 PID:477979d2 TID:c7662fb6 0x87662c3c: >>> Loading module
usbmsc.dll at address 0x03770000-0x0377D000 (RW data at
0x01F79000-0x01F794E0)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\USBMSC.DLL'
4294875782 PID:477979d2 TID:c7662fb6 0x87662c3c: +USBD:OpenPipe, EP:
0x81, MaxPkt: 512, Type: Bulk
4294875782 PID:477979d2 TID:c7662fb6 0x87662c3c: -USBD:OpenPipe
success, hPipe = 5E9D0
4294875782 PID:477979d2 TID:c7662fb6 0x87662c3c: +USBD:OpenPipe, EP:
0x2, MaxPkt: 512, Type: Bulk
4294875782 PID:477979d2 TID:c7662fb6 0x87662c3c: -USBD:OpenPipe
success, hPipe = 5EAA0
4294875782 PID:477979d2 TID:c7662fb6 0x87662c3c: +USBD:OpenPipe, EP:
0x83, MaxPkt: 2, Type: Interrupt
4294875783 PID:477979d2 TID:c7662fb6 0x87662c3c: -USBD:OpenPipe
success, hPipe = 5EB70
4294875784 PID:477979d2 TID:c7662fb6 0x87662c3c: >>> Loading module
usbdisk6.dll at address 0x03760000-0x03770000 (RW data at
0x01F77000-0x01F7751C)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\USBDISK6.DLL'
4294876242 PID:477979d2 TID:c7662fb6 0x87662c3c: DEVICE!
RegReadActivationValues RegQueryValueEx(Drivers\USB\ClientDrivers
\Mass_Storage_Class\6\BusPrefix) returned 2
4294877073 PID:477979d2 TID:c7662fb6 0x87662c3c: Command Block Status:
Command Failed
4294877547 PID:477979d2 TID:c7662fb6 0x87662c3c: ScsiGetSenseData -
SenseKey:0x6 ASC:0x28 ASCQ:0x0
4294877547 PID:477979d2 TID:c7662fb6 0x87662c3c:
SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED
4294877547 PID:477979d2 TID:c7662fb6 0x87662c3c: ScsiTestUnitReady
ERROR:20
4294880238 PID:47048dce TID:47782b76 0x877cbc60: [NOTIFY]
HandleSystemEvent 7 /ADD DSK1:
4294882240 PID:477979d2 TID:77a60aa 0x877c9800: Unsupported IOCTL:
0x71c24
4294882240 PID:477979d2 TID:77a60aa 0x877c9800: DSK_IOControl error:
50
4294882242 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
mspart.dll at address 0x03CD0000-0x03CD9000 (RW data at
0x01FD4000-0x01FD44B4)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\MSPART.DLL'
4294882263 PID:a77c9c1a TID:77a60aa 0x877c9800: Loading partition
driver mspart.dll hModule=86F8B198
4294882263 PID:a77c9c1a TID:77a60aa 0x877c9800: Driver mspart.dll
loaded
4294882740 PID:477979d2 TID:c7662fb6 0x87662c3c: -CHub(Root tier
0)::AttachDevice - port = 1, fIsLowSpeed = 0, address = 1
4294887245 PID:a77c9c1a TID:77a60aa 0x877c9800: Opened the store
hStore=00095440
4294890761 PID:a77c9c1a TID:77a60aa 0x877c9800: NumSec=255488
BytesPerSec=512 FreeSec=238 BiggestCreatable=238
4294890761 PID:a77c9c1a TID:77a60aa 0x877c9800: Partition Part00
NumSectors=255200
4294890761 PID:a77c9c1a TID:77a60aa 0x877c9800: MSPART!
PD_OpenPartition: dwStoreId=00095440, PartName=Part00
4294890763 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
fatfsd.dll at address 0x03EA0000-0x03EC2000 (RW data at
0x01FF2000-0x01FF263C)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\FATFSD.DLL'
4294890786 PID:a77c9c1a TID:77a60aa 0x877c9800: FSD_MountDisk:
mounting volumes for hDsk=0009B790
4294893182 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!MountDisk:
BPB_HiddenSectors(50) != 0
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
access time updates disabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
event logging enabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
automatic scanning disabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
write verify disabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
extra FAT on format disabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
force write through enabled
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
Codepage = 1
4294893183 PID:a77c9c1a TID:77a60aa 0x877c9800: FATFS!OpenVolume:
Number of path cache entries = 50
4294893187 PID:a77c9c1a TID:77a60aa 0x877c9800: >>> Loading module
diskcache.dll at address 0x03E90000-0x03E96000 (RW data at
0x01FF0000-0x01FF04EC)
Loaded symbols for 'E:\WORK\CPU145X\PBWORKSPACE\CPU145X\RELDIR
\CPU145X_146X_1850_X86_DEBUG\DISKCACHE.DLL'
4294893210 PID:a77c9c1a TID:77a60aa 0x877c9800: CreateCache:
Successful. Cache Size: 124 KB, Start: 6, End: 503.
4294893210 PID:a77c9c1a TID:77a60aa 0x877c9800: CreateCache:
Successful. Cache Size: 249 KB, Start: 504, End: 255199.

.

Follow-Ups:
- Re: USB 2.0 ports not working
  - From: Valter Minute

Prev by Date: Re: Debugging with Windows CE and Kontron ETX-PM board
Next by Date: Re: Assembly for CE?
Previous by thread: Re: Debugging with Windows CE and Kontron ETX-PM board
Next by thread: Re: USB 2.0 ports not working
Index(es):
- Date
- Thread

Relevant Pages

Re: Straight-Up Replacement For P4P800-E?
... there is a "hidden warranty" for ICH5/ICH5R failures. ... is that ICH5 is far and away the worst chip. ... is right over top of where the USB I/O pads get their power. ...
(alt.comp.periphs.mainboard.asus)
Re: Files and transfer Cabling
... Nothing to do with MS. I've had memory failures, ... Part way into the install, ... I have, on my computer, a USB scanner, a USB LCD monitor, a USB wireless ... external USB hard drives one 80 gig and one 200 gig, a USB wireless adapter, ...
(rec.outdoors.rv-travel)
Re: WLAN Zero Config settings is not showing more than four Access
... is the debug output of what happens after inserting usr5421 into usb port of ... using OPTIMIZED RX handler ... Any ideas why your platform recognizes the same usr5421, ...
(microsoft.public.windowsce.platbuilder)
Re: Straight-Up Replacement For P4P800-E?
... there is a "hidden warranty" for ICH5/ICH5R failures. ... is that ICH5 is far and away the worst chip. ... is right over top of where the USB I/O pads get their power. ...
(alt.comp.periphs.mainboard.asus)
Re: Drop 2/3 frames when playing wmv in the USB disk
... If you're using a debug driver and it's pumping out thousands of debug ... > I tried to use CE Media Player to play a wmv file in the USB ...
(microsoft.public.windowsce.platbuilder)