Re: S3C2410 Nand Boot

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Have you checked on Samsung web site?
In any case, what you need to do is put a 4K max binary (either written by
yourself or provided by SMSG) at the beginning of the NAND flash that will
initialize the RAM and copy the bootloader from flash to RAM.

HTH

--
--
--
----------------------------------------------------------------
Anthony Pellerin (eMVP)
ADENEO (ADESET)
Windows Embedded Consultant
<apellerin AT adeneo DOT adetelgroup DOT com>
http://www.adeneo.adetelgroup.com
Tél : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------
"Marcelo Silva" <marcelo@xxxxxxxxxxxxxxxxxxxxxx> a écrit dans le message de
news: Oewoft$WHHA.5108@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

I've got a S3C2410 based board from Embest. The board came with Linux
installed but I want to run WinCE 6.0. The main problem is that the board
doesn't have a NOR Flash to Boot Loader. Is there any ready NAND Boot
Loader that I can use???

Thanks

Mrss


.

Relevant Pages

  • Re: MSP430 in-circuit firmware upgrade question
    ... I still don't quite understand what you mean by make the interrupt vector ... boot loader will be able to receive new application firmware ... >> over UART and program it into the flash to replace the older application. ... >> have to be copied to RAM first? ...
    (comp.arch.embedded)
  • Re: Cannot call C function in "Simple" boot loader
    ... I see you're still struggling over the PPC board and vxworks boot loader. ... so when comparing a RAM address to a Flash address ... > * the RAM address will always be greater. ...
    (comp.os.linux.embedded)
  • Cannot call C function in "Simple" boot loader
    ... The vxworks boot loader can load the "Simple" boot loader and ... so when comparing a RAM address to a Flash address ... * relocation to work when the load address is in Flash. ...
    (comp.os.linux.embedded)
  • Re: ROMOFFSET
    ... This offset will be added to the addresses in your nk.bin. ... the image is made to run in RAM. ... IF you want your image to be burned in flash, you should set it to value ... <apellerin AT adeneo DOT adetelgroup DOT com> ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Lots of easy questions about drivers/linking
    ... >have a boot loader in FLASH that copies the BIN to RAM ... for execution. ...
    (microsoft.public.windowsce.platbuilder)