microsoft.public.windowsce.platbuilder

• Thread Index

---

• 3D Graphic on WinCE 5 and x86
  • From: Marco Malentacchi
• Re: GPS support in Windows CE 5.0
  • From: <ctacke/>
• How to export MBR's 2nd partition as USBFN Mass Storage?
  • From: 阿隆西
• Re: How can I write my data to the first 4k of eboot.nb0 when generated by rominage?
  • From: Jesse
• Re: How to rebuild the folder of WINCE500\PRIVATE
  • From: Dean Ramsier
• Re: Fix for KB926260 breaks build from custom SDK
  • From: Joseph F
• Re: Fix for KB926260 breaks build from custom SDK
  • From: Joseph F
• Re: Customizing the GPIOs, Interrupt etc
  • From: Bruce Eitman [eMVP]
• Re: Headless CE 6 device and Wifi WPA-PSK-TKIP - how??
  • From: aq
• Re: PB's incidents
  • From: Hermes
• Re: How to disconnect ActiveSync to suspend
  • From: Hermes
• Re: USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: Dean Ramsier
• Re: Customizing the GPIOs, Interrupt etc
  • From: soreeye
• Re: Atapi driver problem...
  • From: Paul G. Tobey [eMVP]
• Re: How to build SDK with sample programs
  • From: Paul G. Tobey [eMVP]
• Re: CERTMOD. How to?
  • From: Steve Vernor
• Re: CETK Ethernet One-Card Test Failure
  • From: QuasiCodo
• Re: How can I write my data to the first 4k of eboot.nb0 when generated by rominage?
  • From: Bruce Eitman [eMVP]
• Re: Customizing the GPIOs, Interrupt etc
  • From: Bruce Eitman [eMVP]
• Re: How can new generated .lib file be copied to .../cesysgen\oak\lib\ARMV4I\retail directory automatically during building process
  • From: Bruce Eitman [eMVP]
• How can new generated .lib file be copied to .../cesysgen\oak\lib\ARMV4I\retail directory automatically during building process
  • From: Jesse
• serialusbfn.dll compilation
  • From: waterzzz
• Re: windows CE 5.0 and usb kitl
  • From: topomoto
• Re: Real Time test with Polygons
  • From: maite
• touchscreen/stylus problems
  • From: Ulrich Eckhardt
• Re: How NK.bin burned into NAND flash
  • From: Anthony Pellerin
• How NK.bin burned into NAND flash
  • From: CiticPacific
• Re: variables to control features
  • From: Ulrich Eckhardt
• How to build SDK with sample programs
  • From: CiticPacific
• Re: Clearing te keyboard buffer
  • From: riki
• Customizing the GPIOs, Interrupt etc
  • From: soreeye
• How to add more input language
  • From: CiticPacific
• How can I write my data to the first 4k of eboot.nb0 when generated by rominage?
  • From: Jesse
• Re: How to rebuild the folder of WINCE500\PRIVATE
  • From: Hermes
• Re: Making a device driver
  • From: Hermes
• Re: Atapi driver problem...
  • From: Michel Verhagen (eMVP)
• Re: smbsever
  • From: Michel Verhagen (eMVP)
• Re: Making a device driver
  • From: Michel Verhagen (eMVP)
• Re: What happens when plugging in USB devices?
  • From: Michel Verhagen (eMVP)
• Re: How to rebuild the folder of WINCE500\PRIVATE
  • From: Michel Verhagen (eMVP)
• Re: How to speed up build process
  • From: Michel Verhagen (eMVP)
• Re: 1ms timer on WinCE 5.0
  • From: Michel Verhagen (eMVP)
• Re: Binding Network to COM Port
  • From: Paul G. Tobey [eMVP]
• Re: Binding Network to COM Port
  • From: Paul G. Tobey [eMVP]
• How to disconnect ActiveSync to suspend
  • From: Hermes
• Re: How to rebuild the folder of WINCE500\PRIVATE
  • From: Hermes
• Clearing te keyboard buffer
  • From: Greg White
• Re: SetTimeZoneInformation and file time stamps
  • From: Paul G. Tobey [eMVP]
• Re: SetTimeZoneInformation and file time stamps
  • From: portnawake
• Re: Creating a Workspace from the Command-Line
  • From: Dean Ramsier
• Re: Wince Image - bootloader schemes
  • From: JSS
• Re: including battery driver
  • From: Dean Ramsier
• Re: Wince Image - bootloader schemes
  • From: Dean Ramsier
• Re: How to speed up build process
  • From: Dean Ramsier
• Re: variables to control features
  • From: Bruce Eitman [eMVP]
• Re: Warning message
  • From: Piyush
• Re: Warning message
  • From: Paul G. Tobey [eMVP]
• Wince Image - bootloader schemes
  • From: JSS
• Re: Warning message
  • From: Piyush
• Re: Warning message
  • From: Paul G. Tobey [eMVP]
• Re: Creating a Workspace from the Command-Line
  • From: cmarin
• Warning message
  • From: Piyush
• Re: USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Paul G. Tobey [eMVP]
• Re: SetTimeZoneInformation and file time stamps
  • From: Paul G. Tobey [eMVP]
• Re: RichEdit DLL - does it require a core or professional licence
  • From: Paul G. Tobey [eMVP]
• Re: SD HC support under WinCE 5.0 & 6.0
  • From: Paul G. Tobey [eMVP]
• Re: RichEdit DLL - does it require a core or professional licence
  • From: ringwood
• Re: Installable Interrupt on PCI
  • From: Michael H
• Re: Real Time test with Polygons
  • From: Bruce Eitman [eMVP]
• Re: variables to control features
  • From: Ulrich Eckhardt
• Re: Installable Interrupt on PCI
  • From: Travis Hobrla [MS]
• Real Time test with Polygons
  • From: maite
• SMSC911xx or AX88xxxx
  • From: alexquisi
• Re: variables to control features
  • From: Bruce Eitman [eMVP]
• Remove ActiveSync service or folder from the Inbox application (pmail.exe) in CE 5.0
  • From: brian.s.crofts@xxxxxxxxx
• variables to control features
  • From: Ulrich Eckhardt
• Re: including battery driver
  • From: Bruce Eitman [eMVP]
• Re: How to rebuild the folder of WINCE500\PRIVATE
  • From: Ulrich Eckhardt
• How to rebuild the folder of WINCE500\PRIVATE
  • From: dhua
• Re: Run-time error during loading of Indutrial Controller image
  • From: Zhiqiang Li
• Re: KITL Serial crash
  • From: greg@Adeneo
• Re: Run-time error during loading of Indutrial Controller image
  • From: Zhiqiang Li
• Re: NKStartup done, starting up kernel.
  • From: rmbastos
• Re: USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Eike
• Re: KITL Serial crash
  • From: greg@Adeneo
• Help needed in porting lcd driver from i.mx21 to i.MXL
  • From: Chitra
• Re: KITL Serial crash
  • From: Doug Cook [MSFT]
• Re: SetTimeZoneInformation and file time stamps
  • From: portnawake
• Re: including battery driver
  • From: Anwar
• Re: Headless CE 6 device and Wifi WPA-PSK-TKIP - how??
  • From: Paul G. Tobey [eMVP]
• Re: Headless CE 6 device and Wifi WPA-PSK-TKIP - how??
  • From: aq
• Re: SetTimeZoneInformation and file time stamps
  • From: Paul G. Tobey [eMVP]
• Re: Creating a Workspace from the Command-Line
  • From: Dean Ramsier
• Re: SetTimeZoneInformation and file time stamps
  • From: portnawake
• Re: NKStartup done, starting up kernel.
  • From: Dean Ramsier
• Re: Headless CE 6 device and Wifi WPA-PSK-TKIP - how??
  • From: Paul G. Tobey [eMVP]
• Headless CE 6 device and Wifi WPA-PSK-TKIP - how??
  • From: aq
• Re: Creating a Workspace from the Command-Line
  • From: cmarin
• Re: NKStartup done, starting up kernel.
  • From: Bruce Eitman [eMVP]
• Re: NKStartup done, starting up kernel.
  • From: Dean Ramsier
• Re: Run-time error during loading of Indutrial Controller image
  • From: Paul G. Tobey [eMVP]
• Re: A question about boot loader to bringup Wince
  • From: Silver
• Re: A question about boot loader to bringup Wince
  • From: nick.lin
• Re: A question about boot loader to bringup Wince
  • From: Silver
• Re: USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Paul G. Tobey [eMVP]
• Re: Can't add driver to target image
  • From: Paul G. Tobey [eMVP]
• Re: eboot and FFUART
  • From: Blake
• Re: SetTimeZoneInformation and file time stamps
  • From: Paul G. Tobey [eMVP]
• windows CE 5.0 and usb kitl
  • From: Topomoto
• Re: how to get the address of GetContiguousPages
  • From: Simon
• Re: creating a project for a driver
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Fix for KB926260 breaks build from custom SDK
  • From: Helge Kruse
• NKStartup done, starting up kernel.
  • From: rmbastos
• Re: Putting wince in sleep mode
  • From: <ctacke/>
• Re: Putting wince in sleep mode
  • From: Gajanan . Agre
• Re: Putting wince in sleep mode
  • From: Dean Ramsier
• Re: creating a project for a driver
  • From: Valter Minute
• Re: Run-time error during loading of Indutrial Controller image
  • From: Zhiqiang Li
• Re: Putting wince in sleep mode
  • From: Bruce Eitman [eMVP]
• Re: creating a project for a driver
  • From: Bruce Eitman [eMVP]
• Re: Putting wince in sleep mode
  • From: Gajanan . Agre
• creating a project for a driver
  • From: Ulrich Eckhardt
• Re: including battery driver
  • From: Bruce Eitman [eMVP]
• Re: problem regarding hive registry setup on usb for arm IV platform
  • From: Valter Minute
• Re: BIOS load with static IP
  • From: maite
• Run-time error during loading of Indutrial Controller image
  • From: Zhiqiang Li
• BIOS load with static IP
  • From: maite
• Re: Installable Interrupt on PCI
  • From: Michael H
• Re: eboot and FFUART
  • From: soreeye
• Re: SetTimeZoneInformation and file time stamps
  • From: portnawake
• Re: Installable Interrupt on PCI
  • From: Doug Cook [MSFT]
• Re: eboot and FFUART
  • From: K. S. Huang
• Re: including battery driver
  • From: Anwar
• Re: including battery driver
  • From: Anwar
• eboot and FFUART
  • From: soreeye
• Re: 1ms timer on WinCE 5.0
  • From: Bruce Eitman [eMVP]
• Re: How to put an exe file into nk.bin
  • From: Cheng Shi
• Re: no audio using voip stack without kitl
  • From: Silver
• Re: Making a device driver
  • From: Silver
• Re: add passthru NDIS Intermediate Driver in to CE5.0
  • From: Minerva
• Re: including battery driver
  • From: Michel Verhagen (eMVP)
• Re: Why not re-link when files are organized with DIRS file?
  • From: Silver
• USB mouse and USB keyboard are not detected (on PCI bus)
  • From: Eike
• RE: Help -- The kernel debugger is waiting to connect to traget
  • From: Rob
• Clone keyboard driver
  • From: Rob
• Re: Can't add driver to target image
  • From: Paul G. Tobey [eMVP]
• RE: Clone keyboard driver
  • From: Rob
• Re: Boot wince image
  • From: Paul G. Tobey [eMVP]
• Re: About USB host capability..
  • From: Paul G. Tobey [eMVP]
• RE: SHBrowseForFolder not working in wince 5.0(x86) processor
  • From: Steffen.K
• how to get the address of GetContiguousPages in kernel
  • From: simon
• Re: PB's incidents
  • From: Michel Verhagen (eMVP)
• Re: Windows CE cannot see hard disk
  • From: Michel Verhagen (eMVP)
• RE: Making a device driver
  • From: George H.
• Re: SetTimeZoneInformation and file time stamps
  • From: Paul G. Tobey [eMVP]
• Re: DeviceIOControl Error on wince
  • From: Shiju
• SetTimeZoneInformation and file time stamps
  • From: portnawake
• DeviceIOControl Error on wince
  • From: Shiju
• Re: Putting wince in sleep mode
  • From: Dean Ramsier
• Re: Putting wince in sleep mode
  • From: Bruce Eitman [eMVP]
• Re: nk.nb0
  • From: Bruce Eitman [eMVP]
• Re: nk.nb0
  • From: Silver
• Re: how to get the address of GetContiguousPages
  • From: Silver
• Re: including battery driver
  • From: Blake
• Re: Help -- The kernel debugger is waiting to connect to traget
  • From: Blake
• Re: Putting wince in sleep mode
  • From: Dean Ramsier
• Re: Memory monitor
  • From: Dean Ramsier
• Re: Memory monitor
  • From: Mhaxx
• Re: Putting wince in sleep mode
  • From: Bruce Eitman [eMVP]
• Re: Help -- The kernel debugger is waiting to connect to traget
  • From: Simon
• Re: Help -- The kernel debugger is waiting to connect to traget
  • From: Dean Ramsier
• Re: Memory monitor
  • From: Dean Ramsier
• how to get the address of GetContiguousPages
  • From: Simon
• Re: Putting wince in sleep mode
  • From: Dean Ramsier
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: including battery driver
  • From: Bruce Eitman [eMVP]
• including battery driver
  • From: Anwar
• Re: Windows CE 6.0 on Orcas Studio
  • From: Jan Kucera
• Re: System Password
  • From: Bruce Eitman [eMVP]
• Re: problem regarding hive registry setup on usb for arm IV platform
  • From: vipin
• Re: problem regarding hive registry setup on usb for arm IV platform
  • From: vipin
• nk.nb0
  • From: nihar
• Re: Memory monitor
  • From: <ctacke/>
• Re: question about thread scheduling
  • From: <ctacke/>
• s3c2440 ce5 suspend and awake
  • From: TekFree . dean
• nk.nb0
  • From: nihar
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Windows CE 5.0 6x Com port
  • From: Wing Wu
• Re: Help -- The kernel debugger is waiting to connect to traget
  • From: Ulrich Eckhardt
• Putting wince in sleep mode
  • From: Gajanan . Agre
• Re: System Password
  • From: Dennis Borde
• Re: Memory monitor
  • From: Mhaxx
• Help -- The kernel debugger is waiting to connect to traget
  • From: vikasmpatil
• Re: How to add my own Jpeg decoder to replace the build in Jpeg decoder
  • From: creative
• Re: SHBrowseForFolder not working in wince 5.0(x86) processor
  • From: Bruce Eitman [eMVP]
• Re: System Password
  • From: Bruce Eitman [eMVP]
• for lita: energetic spam free nntp access - osma at - (1/1)
  • From: montague
• Re: Must I call function NKForceCleanBoot() in OEMInit()?
  • From: Dean Ramsier
• Re: DeactivateDevice of builtIn device
  • From: Dean Ramsier
• Re: Windows CE 6.0 on Orcas Studio
  • From: Doug Cook [MSFT]
• Re: How to put an exe file into nk.bin
  • From: Crystal Kaneshiro [MSFT]
• System Password
  • From: Dennis Borde
• Re: Memory monitor
  • From: Simon
• Re: How to put an exe file into nk.bin
  • From: Blake
• Re: Creating a Workspace from the Command-Line
  • From: Bruce Eitman [eMVP]
• Re: to make a better AllocPhysMem
  • From: Simon
• Re: problem regarding hive registry setup on usb for arm IV platform
  • From: Valter Minute
• Windows CE 6.0 on Orcas Studio
  • From: Jan Kucera
• problem regarding hive registry setup on usb for arm IV platform
  • From: vipin
• Re: Windows CE 5.0 6x Com port
  • From: Valter Minute
• Re: Must I call function NKForceCleanBoot() in OEMInit()?
  • From: LDW
• Re: add passthru NDIS Intermediate Driver in to CE5.0
  • From: Iulia
• Re: Problem with fonts
  • From: max
• Re: How to put an exe file into nk.bin
  • From: Andrew at Plextek (www.plextek.co.uk)
• How to put an exe file into nk.bin
  • From: Cheng Shi
• Windows CE 5.0 6x Com port
  • From: Wing Wu
• Re: Memory monitor
  • From: Mhaxx
• SHBrowseForFolder not working in wince 5.0(x86) processor
  • From: sumathyrajalakshmi
• Re: serial port problem : no Rx Interrupt
  • From: nagesh
• Re: One more strange thing happens....
  • From: K. S. Huang
• Re: Must I call function NKForceCleanBoot() in OEMInit()?
  • From: Blake
• Re: PB's incidents
  • From: Steve Maillet \(eMVP\)
• Re: How to add my registry entries in the image?
  • From: Simon
• Re: AllocPhysMem return ERROR_NOT_ENOUGH_MEMORY
  • From: Simon
• Re: Memory monitor
  • From: Simon
• Re: L2CAP and Winsock
  • From: Greg Scott [MS]
• Re: Windows CE cannot see hard disk
  • From: SD
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: Creating a Workspace from the Command-Line
  • From: cmarin
• Re: How to set up Platform Builder and Lauterbach
  • From: RichardB
• Re: to make a better AllocPhysMem
  • From: Simon
• Re: PB's incidents
  • From: Hermes
• Re: DeactivateDevice of builtIn device
  • From: ydlu
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: what does build.exe do?
  • From: Mike Christian
• Re: wince 6.0: building shared source private\coreos\NK problem
  • From: Blake
• Re: serial port problem : no Rx Interrupt
  • From: Blake
• Re: Creating a Workspace from the Command-Line
  • From: Bruce Eitman [eMVP]
• Re: Creating a Workspace from the Command-Line
  • From: cmarin
• Re: RegPersisted x ActiveSync
  • From: Hermes
• Re: PB's incidents
  • From: <ctacke/>
• Re: PB's incidents
  • From: Paul G. Tobey [eMVP]
• Re: PB's incidents
  • From: Paul G. Tobey [eMVP]
• Re: PB's incidents
  • From: <ctacke/>
• Re: PB's incidents
  • From: Valter Minute
• Re: Creating a Workspace from the Command-Line
  • From: cmarin
• PB's incidents
  • From: Hermes
• Re: Creating a Workspace from the Command-Line
  • From: Bruce Eitman [eMVP]
• Re: CDMA
  • From: Paul G. Tobey [eMVP]
• CE6 real-time problem
  • From: maite
• Re: Must I call function NKForceCleanBoot() in OEMInit()?
  • From: Bruce Eitman [eMVP]
• Creating a Workspace from the Command-Line
  • From: cmarin
• Problem with fonts
  • From: max
• Must I call function NKForceCleanBoot() in OEMInit()?
  • From: LDW
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: to make a better AllocPhysMem
  • From: Bruce Eitman [eMVP]
• Re: about the eboot.nb0 in PB6.0
  • From: Sparks
• Re: Platform Builder 5.0: how to compile with /Ze (to fix warning C422
  • From: Bruce Eitman [eMVP]
• Re: Exporting a fucntion from a wince Driver
  • From: Bruce Eitman [eMVP]
• Re: Some problems about address mapping in windows ce5.0
  • From: nagesh
• Re: Sharing Ethernet Debugging Services with CE 5.0
  • From: voidcoder
• Re: PB 6.0 ethernet connection to target seems slow
  • From: voidcoder
• Re: Some problems about address mapping in windows ce5.0
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Some problems about address mapping in windows ce5.0
  • From: Andrew at Plextek (www.plextek.co.uk)
• wince 6.0: building shared source private\coreos\NK problem
  • From: abhishek . nimonkar
• Re: Some problems about address mapping in windows ce5.0
  • From: nagesh
• Re: How to add RTL8139 support to NK.bin?
  • From: maite
• Re: vs2005 and .rel files
  • From: voidcoder
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: How to add RTL8139 support to NK.bin?
  • From: nagesh
• Re: How to add RTL8139 support to NK.bin?
  • From: zhanghui
• Re: How to add RTL8139 support to NK.bin?
  • From: maite
• Re: How to add my registry entries in the image?
  • From: Felixm
• Re: Exporting a fucntion from a wince Driver
  • From: Valter Minute
• Re: CDMA
  • From: Mhaxx
• Re: Program protection - can not be copied
  • From: Valter Minute
• serial port problem : no Rx Interrupt
  • From: nagesh
• How to add RTL8139 support to NK.bin?
  • From: zhanghui
• Re: How to add my own Jpeg decoder to replace the build in Jpeg decoder
  • From: creative
• Re: Platform Builder 5.0: how to compile with /Ze (to fix warning C422
  • From: Helge Kruse
• to make a better AllocPhysMem
  • From: simon
• NDIS IM binding question Please help.
  • From: wjm0874
• Re: Program protection - can not be copied
  • From: Rob
• Re: RNDIS USB Wifi adapter recommendations?
  • From: Paul G. Tobey [eMVP]
• Re: RNDIS USB Wifi adapter recommendations?
  • From: portnawake
• Re: How is IESample related to file system shortcuts?
  • From: Paul G. Tobey [eMVP]
• Re: Exporting a fucntion from a wince Driver
  • From: Paul G. Tobey [eMVP]
• Exporting a fucntion from a wince Driver
  • From: shiju
• SD WiFi + Resume
  • From: Keaven Pineau
• Re: Program protection - can not be copied
  • From: Doug Cook [MSFT]
• Re: How is IESample related to file system shortcuts?
  • From: <ctacke/>
• Re: How is IESample related to file system shortcuts?
  • From: Paul G. Tobey [eMVP]
• How is IESample related to file system shortcuts?
  • From: <ctacke/>
• Re: CDMA
  • From: <ctacke/>
• Re: Add root cert to image in Platform Builder
  • From: ryan . boyd
• CDMA
  • From: Mhaxx
• Re: Add root cert to image in Platform Builder
  • From: Silver
• Re: HTTP ASP sample
  • From: Alan Green
• Re: RichEdit DLL - does it require a core or professional licence
  • From: Paul G. Tobey [eMVP]
• Re: IPSM and Clean Boot
  • From: Dean Ramsier
• Re: How to add my registry entries in the image?
  • From: Dean Ramsier
• Re: Can not load display driver (SMI Voyager Family)
  • From: Valter Minute
• Re: HTTP ASP sample
  • From: Alan Green
• Re: RNDIS USB Wifi adapter recommendations?
  • From: aq
• Re: Can not load display driver (SMI Voyager Family)
  • From: Bruce Eitman [eMVP]
• Re: UTF-8 stream to unicode conversion
  • From: Ulrich Eckhardt
• Re: UTF-8 stream to unicode conversion
  • From: Mams
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Orca
• Re: RNDIS USB Wifi adapter recommendations?
  • From: Anthony Pellerin
• Re: Program protection - can not be copied
  • From: Rob
• Re: How to add my registry entries in the image?
  • From: Felixm
• Re: Can not load display driver (SMI Voyager Family)
  • From: Bruce Eitman [eMVP]
• Re: UTF-8 stream to unicode conversion
  • From: max
• Re: How to add my registry entries in the image?
  • From: Dean Ramsier
• Re: How to add my registry entries in the image?
  • From: Felixm
• UTF-8 stream to unicode conversion
  • From: Mams
• Re: AllocPhysMem return ERROR_NOT_ENOUGH_MEMORY
  • From: Dean Ramsier
• Re: How to add my registry entries in the image?
  • From: Bruce Eitman [eMVP]
• Re: AllocPhysMem return ERROR_NOT_ENOUGH_MEMORY
  • From: Bruce Eitman [eMVP]
• Re: what does build.exe do?
  • From: Bruce Eitman [eMVP]
• Add root cert to image in Platform Builder
  • From: ryan . boyd
• AllocPhysMem return ERROR_NOT_ENOUGH_MEMORY
  • From: Valentin Melnik
• How to add my registry entries in the image?
  • From: Felixm
• RichEdit DLL - does it require a core or professional licence
  • From: ringwood
• Re: Some problems about address mapping in windows ce5.0
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: How to set up Platform Builder and Lauterbach
  • From: Henrik Viklund
• Re: vs2005 and .rel files
  • From: kristof.vandenbussche@xxxxxxxxx
• Re: 'DBGMSG' doesnot get connected
  • From: Niels Brouwers
• Re: How to set up Platform Builder and Lauterbach
  • From: Niels Brouwers
• Re: How to calculate the max process number in CE6.0?
  • From: Henrik Viklund
• How to set up Platform Builder and Lauterbach
  • From: reshamlal
• 'DBGMSG' doesnot get connected
  • From: Chitra
• Re: Ethernet problem...
  • From: Mekas
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Amjad \(MSFT\)
• Re: Ethernet problem...
  • From: Doug Cook [MSFT]
• Re: RIL issues for CE 6.0 and Compiler
  • From: Doug Cook [MSFT]
• Re: 6.0 PCI network boot
  • From: Doug Cook [MSFT]
• Re: what does build.exe do?
  • From: Doug Cook [MSFT]
• RNDIS USB Wifi adapter recommendations?
  • From: aq
• Re: IPSM and Clean Boot
  • From: soreeye
• Re: what does build.exe do?
  • From: Mike Christian
• Re: what does build.exe do?
  • From: Mike Christian
• what does build.exe do?
  • From: Mike Christian
• Re: Windows CE cannot see hard disk
  • From: Michel Verhagen (eMVP)
• Re: Windows CE PC boots very randomly
  • From: Paul G. Tobey [eMVP]
• PKCS_7_ASN_ENCODING support on Windows CE 5.0
  • From: sjain06
• Windows CE PC boots very randomly
  • From: rwgardner
• Windows CE cannot see hard disk
  • From: SD
• Re: problems loading driver in release mode
  • From: Bruce Eitman [eMVP]
• Re: problems loading driver in release mode
  • From: Bruce Eitman [eMVP]
• Re: HTTP ASP sample
  • From: Crystal Kaneshiro [MSFT]
• Re: problems loading driver in release mode
  • From: Paul G. Tobey [eMVP]
• Re: unable to find platform.bib
  • From: Valter Minute
• Re: unable to find platform.bib
  • From: Mike Christian
• Re: IPSM and Clean Boot
  • From: Dean Ramsier
• Re: RIL issues for CE 6.0 and Compiler
  • From: Dean Ramsier
• Re: problem to start up applications
  • From: Bruce Eitman [eMVP]
• Re: ActiveX not working (CE 5.0)
  • From: Paul G. Tobey [eMVP]
• Re: IPSM and Clean Boot
  • From: Paul G. Tobey [eMVP]
• Re: problem to start up applications
  • From: Arnie
• Re: Ethernet problem...
  • From: Silver
• Re: Platform Builder question
  • From: Iulia
• Re: Platform Builder question
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: 6.0 PCI network boot
  • From: Henry Markov
• Re: Platform Builder question
  • From: Bruce Eitman [eMVP]
• Re: unable to find platform.bib
  • From: Bruce Eitman [eMVP]
• Re: unable to find platform.bib
  • From: Valter Minute
• Platform Builder question
  • From: Iulia
• Re: How to build bootloader for changing RTL8139 Ethernet?
  • From: Bruce Eitman [eMVP]
• Re: ActiveX not working (CE 5.0)
  • From: <ctacke/>
• Re: HTTP ASP sample
  • From: Alan Green
• Re: HTTP ASP sample
  • From: Alan Green
• Re: Regarding CF
  • From: Mukesh
• Re: Some problems in mapping address
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Some problems about address mapping in windows ce5.0
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: IXDP425 Can not load any display driver, especially the SM 5
  • From: K. S. Huang
• Re: unable to find platform.bib
  • From: Valter Minute
• Re: switch video output between TV and LCD after system booted
  • From: Valter Minute
• Anew: IXDP425 Can not load any display driver, especially the SM 5
  • From: Eike
• [Windows CE 5.0] PlatformNotSupportedException when using french collation on MSSQLServer2000
  • From: Damien
• [Windows CE 5.0] PlatformNotSupportedException when using french collation on MSSQLServer2000
  • From: Damien
• Re: Program protection - can not be copied
  • From: Valter Minute
• Re: switch video output between TV and LCD after system booted
  • From: daniel
• Some problems in mapping address
  • From: linfan
• Re: switch video output between TV and LCD after system booted
  • From: ZhouShaohui
• Re: Platform builder Files Missing
  • From: DRG123
• Re: How to get calibration at first power on.
  • From: K. S. Huang
• Re: How to get calibration at first power on.
  • From: <ctacke/>
• How to add my own Jpeg decoder to replace the build in Jpeg decoder
  • From: creative
• switch video output between TV and LCD after system booted
  • From: daniel
• Re: 6.0 PCI network boot
  • From: Doug Cook [MSFT]
• Re: about bluetooth question?
  • From: LDW
• Very Slow with Unicode Script Processor for Complex Scripts
  • From: ZhouShaohui
• Re: Missing CE6.0 tools
  • From: Blake
• Re: IPSM and Clean Boot
  • From: soreeye
• Re: problem to start up applications
  • From: Paul G. Tobey [eMVP]
• unable to find platform.bib
  • From: Mike Christian
• Re: problem to start up applications
  • From: Tom
• Re: Cannot read Remote Performance Monitor log files
  • From: Ken Sadahiro [MSFT]
• Re: USB Device Detection
  • From: Bill T
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Orca
• Re: Regarding CF
  • From: Arnie
• Re: CE5.0 Command line tools
  • From: Arnie
• 6.0 PCI network boot
  • From: Henry Markov
• Re: DeactivateDevice of builtIn device
  • From: Bruce Eitman [eMVP]
• Re: .NET CF eats RAM!
  • From: Doug Cook [MSFT]
• Re: How to build bootloader for changing RTL8139 Ethernet?
  • From: Doug Cook [MSFT]
• Re: Does WinCE 5.0 support change the preferred audio output device?
  • From: andyraf
• Re: Screen Rotation Memory Leak
  • From: andyraf
• Re: problem to start up applications
  • From: Paul G. Tobey [eMVP]
• Re: Platform builder Files Missing
  • From: Dean Ramsier
• Re: What's the difference between TransBusAddrToStatic() and MmMapIoSpace()?
  • From: Silver
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: Dean Ramsier
• Re: problem to start up applications
  • From: Tom
• Re: about the eboot.nb0 in PB6.0
  • From: Dean Ramsier
• Re: USB host CETK problem
  • From: Silver
• Re: DeactivateDevice of builtIn device
  • From: Dean Ramsier
• Re: What's the difference between TransBusAddrToStatic() and MmMapIoSpace()?
  • From: Dean Ramsier
• Re: HTTP ASP sample
  • From: Crystal Kaneshiro [MSFT]
• Re: Samsung S3C2440 Documentation
  • From: Hermes
• Re: problem to start up applications
  • From: Paul G. Tobey [eMVP]
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: IPSM and Clean Boot
  • From: Paul G. Tobey [eMVP]
• problem to start up applications
  • From: Tom
• DeactivateDevice of builtIn device
  • From: ydlu
• USB host CETK problem
  • From: aman
• Re: question about thread scheduling
  • From: Henrik Viklund
• What's the difference between TransBusAddrToStatic() and MmMapIoSpace()?
  • From: Gordon
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Program protection - can not be copied
  • From: Brian
• Re: CE5.0 Command line tools
  • From: Henrik Viklund
• Re: Problem after KITL initialization
  • From: Chitra
• Re: question about thread scheduling
  • From: Henrik Viklund
• Got some responses
  • From: Eike
• Re: .NET CF eats RAM!
  • From: Mhaxx
• Re: question about thread scheduling
  • From: Zhiqiang Li
• about the eboot.nb0 in PB6.0
  • From: dhua
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Problems during building process
  • From: Andrew at Plextek (www.plextek.co.uk)
• RE: RegPersisted x ActiveSync
  • From: Luca Calligaris
• Re: about bluetooth question?
  • From: LDW
• Re: ROM-only file system
  • From: soreeye
• Re: ROM-only file system
  • From: K. S. Huang
• Re: IXP425 - Kernel hangs, don't know what to expexct - CE 5.0
  • From: K. S. Huang
• Re: IPSM and Clean Boot
  • From: soreeye
• Re: Can't set the connectivity options
  • From: Ryan
• Re: about Bluetooth driver
  • From: LDW
• Re: about Bluetooth driver
  • From: LDW
• about bluetooth question?
  • From: LDW
• Re: Can't set the connectivity options
  • From: Shane Tangen [MS]
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: Stanley
• Re: lots of errors when build from command line
  • From: Silver
• Re: IPSM and Clean Boot
  • From: soreeye
• lots of errors when build from command line
  • From: Mike Christian
• Re: Problems during building process
  • From: Silver
• Additional Sources
  • From: embdev
• Re: .NET CF eats RAM!
  • From: Doug Cook [MSFT]
• Re: question about thread scheduling
  • From: Michel Verhagen (eMVP)
• Re: Program protection - can not be copied
  • From: Michel Verhagen (eMVP)
• Re: Is zero-length USB packet supported in Windows CE 5.0 ?
  • From: Sameer Moidu \(MS\)
• Samsung S3C2440 Documentation
  • From: Hermes
• Re: RegPersisted x ActiveSync
  • From: <ctacke/>
• Re: question about thread scheduling
  • From: Steve Wolstenholme
• Re: Platformbuilder5.0 QFE Rollup Package 2006- Install Problem
  • From: Frank
• Re: RegPersisted x ActiveSync
  • From: Hermes
• Re: RegPersisted x ActiveSync
  • From: Paul G. Tobey [eMVP]
• Platformbuilder5.0 QFE Rollup Package 2006- Install Problem
  • From: Frank
• Re: RegPersisted x ActiveSync
  • From: Hermes
• Re: RegPersisted x ActiveSync
  • From: <ctacke/>
• Re: RegPersisted x ActiveSync
  • From: Hermes
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: Dean Ramsier
• Re: RegPersisted x ActiveSync
  • From: Paul G. Tobey [eMVP]
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: kendai
• RegPersisted x ActiveSync
  • From: Hermes
• Re: Debugging .Net Applications
  • From: Paul G. Tobey [eMVP]
• Re: Remote Control
  • From: Paul G. Tobey [eMVP]
• Re: IPSM and Clean Boot
  • From: Paul G. Tobey [eMVP]
• Re: Program protection - can not be copied
  • From: Brian
• Re: Remote Control
  • From: Rob
• Re: Authentication under CE 4.2
  • From: Max Mayer
• Re: Problems during building process
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Authentication under CE 4.2
  • From: Valter Minute
• Re: IXP425 - Kernel hangs, don't know what to expexct - CE 5.0
  • From: Anthony Pellerin
• Re: Authentication under CE 4.2
  • From: Max Mayer
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: question about thread scheduling
  • From: Henrik Viklund
• Re: .NET CF eats RAM!
  • From: <ctacke/>
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Authentication under CE 4.2
  • From: Valter Minute
• Re: Kernel Bootup Crashing at MDCreateThread
  • From: Stanley
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Authentication under CE 4.2
  • From: Max Mayer
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: question about thread scheduling
  • From: Henrik Viklund
• Re: Intel XScale PXA270 bsp ?
  • From: Valter Minute
• Re: question about thread scheduling
  • From: Helge Kruse
• IPSM and Clean Boot
  • From: soreeye
• IXP425 - Kernel hangs, don't know what to expexct - CE 5.0
  • From: Eike
• one more word
  • From: Eike
• one more word
  • From: Eike
• IXP425 - Kernel hangs, don't know what to expexct - CE 5.0
  • From: Eike
• Re: Intel XScale PXA270 bsp ?
  • From: voidcoder
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Debugging .Net Applications
  • From: Dennis Borde
• Re: .NET CF eats RAM!
  • From: Mhaxx
• outlook messages to phone application cprog.exe
  • From: DRG123
• Re: Debugging .Net Applications
  • From: Dennis Borde
• Re: Program protection - can not be copied
  • From: Valter Minute
• Re: Debugging .Net Applications
  • From: Dennis Borde
• Re: Intel XScale PXA270 bsp ?
  • From: Valter Minute
• Re: USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: Luc Cool
• Re: Platform builder Files Missing
  • From: DRG123
• Re: WLAN Zero Config settings is not showing more than four Access
  • From: PRABU . ECON
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Michael Chen [MS]
• Re: question about thread scheduling
  • From: voidcoder
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: Is CE6 really Real-Time???
  • From: Steve Maillet \(eMVP\)
• RE: CETK Ethernet One-Card Test Failure
  • From: anonymous
• i.MX21 SDRAM Controller Initialization
  • From: Mario
• Re: ActiveSync connection over USB fails (Rnaapp error 619)
  • From: voidcoder
• Re: Intel XScale PXA270 bsp ?
  • From: voidcoder
• Re: CE5.0 Command line tools
  • From: voidcoder
• Re: Inconsistent information about process and thread using KITL
  • From: voidcoder
• Re: vs2005 and .rel files
  • From: voidcoder
• Re: vs2005 and .rel files
  • From: Helge Kruse
• Re: question about thread scheduling
  • From: Henrik Viklund
• Program protection - can not be copied
  • From: Brian
• How to implement & test DirectDraw Alpha Blending on WinCE 5.0?
  • From: Thomas Peng
• Inconsistent information about process and thread using KITL
  • From: Chitra
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: question about thread scheduling
  • From: Zhiqiang Li
• Re: problem with InjectDLL
  • From: Zhiqiang Li
• Re: how to build eboot.nb0 in wince6(nb0 is not appear yet)
  • From: david
• Re: how to build eboot.nb0 in wince6
  • From: david
• Re: Remote Control
  • From: Rob
• Re: Remote Control
  • From: Paul G. Tobey [eMVP]
• Re: Intel XScale PXA270 bsp ?
  • From: Paul G. Tobey [eMVP]
• Re: USBCDC
  • From: Paul G. Tobey [eMVP]
• Re: Stack used by thread
  • From: Paul G. Tobey [eMVP]
• Re: Memory monitor
  • From: Paul G. Tobey [eMVP]
• Re: Remote Control
  • From: Paul G. Tobey [eMVP]
• Re: Debugging .Net Applications
  • From: <ctacke/>
• Re: Problems with 2006 rollup QFE for 5.0
  • From: Joseph F
• Re: .NET CF eats RAM!
  • From: <ctacke/>
• Re: problem with InjectDLL
  • From: Paul G. Tobey [eMVP]
• Re: Regarding CF
  • From: Luc Cool
• WinCE Update releases for the month of February 2007
  • From: QFEAdmin \(MS\)
• Re: I2C stream interface driver
  • From: bluesphere
• Re: Platform builder Files Missing
  • From: Bruce Eitman [eMVP]
• Re: Is CE6 really Real-Time???
  • From: Bruce Eitman [eMVP]
• Re: how to build eboot.nb0 in wince6
  • From: Bruce Eitman [eMVP]
• Re: Setting support more than 64M RAM directly in different BSP
  • From: Remi de Gravelaine
• Re: Authentication under CE 4.2
  • From: Valter Minute
• Re: Authentication under CE 4.2
  • From: Max Mayer
• Re: CE 6 Emulator Standalone - .cem ??
  • From: raiderdav
• Re: Setting support more than 64M RAM directly in different BSP
  • From: Angus.Tsai
• ActiveSync connection over USB fails (Rnaapp error 619)
  • From: C. Klaver
• Re: Authentication under CE 4.2
  • From: Valter Minute
• Authentication under CE 4.2
  • From: Max Mayer
• Re: Is CE6 really Real-Time???
  • From: Remi de Gravelaine
• Re: Platform Builder license - "one place" or "multiplace" version?
  • From: Martin Grossen, eMVP [AVNET Silica]
• Re: question about thread scheduling
  • From: Remi de Gravelaine
• Re: Is CE6 really Real-Time???
  • From: maite
• .NET CF eats RAM!
  • From: Mhaxx
• Is CE6 really Real-Time???
  • From: maite
• Re: Restrictions in oal?
  • From: Valter Minute
• question about thread scheduling
  • From: Zhiqiang Li
• Re: Restrictions in oal?
  • From: max
• Regarding CF
  • From: Mukesh
• Re: I can see it(myDLL.dll) inside file viewer, but it is not in remote process viewer, nor in kernel tracker. please help
  • From: Zhiqiang Li
• Re: dll loading problem
  • From: Zhiqiang Li
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: Javier Grijalba
• Re: Setting support more than 64M RAM directly in different BSP
  • From: Remi de Gravelaine
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: Restrictions in oal?
  • From: Valter Minute
• Re: ROM-only file system
  • From: soreeye
• Re: ROM-only file system
  • From: soreeye
• Re: Limitations of WinCE 5.0 PB Evaluation Edition ?
  • From: Luc Cool
• Re: Debugging .Net Applications
  • From: voidcoder
• Re: Debugging .Net Applications
  • From: Dennis Borde
• Re: question about thread creation
  • From: Remi de Gravelaine
• Platform builder Files Missing
  • From: DRG123
• USBCDC
  • From: rajitha
• Re: Restrictions in oal?
  • From: max
• how to build eboot.nb0 in wince6
  • From: david
• Program protection - can not be copied
  • From: Brian
• Re: CE 6 Emulator Standalone - .cem ??
  • From: raiderdav
• Re: Debugging .Net Applications
  • From: voidcoder
• Re: Restrictions in oal?
  • From: voidcoder
• Re: I can see it(myDLL.dll) inside file viewer, but it is not in remote process viewer, nor in kernel tracker. please help
  • From: <ctacke/>
• Re: OpenNetCF - SDF 1.4
  • From: <ctacke/>
• Re: SDIO Bluetooth Type A Functional Driver
  • From: voidcoder
• Re: 'CE Target Control' is disabled
  • From: voidcoder
• Re: vs2005 and .rel files
  • From: voidcoder
• Re: Multiple Key Events
  • From: voidcoder
• CETK Ethernet One-Card Test Failure
  • From: QuasiCodo
• Re: File Download Bug?!
  • From: Silver
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: dll loading problem
  • From: Silver
• Re: about Bluetooth driver
  • From: Silver
• Re: Mass Storage gets slow after eraseing/copying files for many times.
  • From: Silver
• Re: I2C stream interface driver
  • From: Silver
• Re: CE6 driver porting
  • From: Damon Barry
• Re: Restrictions in oal?
  • From: Silver
• Re: vs2005 and .rel files
  • From: kristof.vandenbussche@xxxxxxxxx
• Re: PS2 Y-Cable, does not work
  • From: Samuel Phung \(eMVP\)
• Re: USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: Samuel Phung \(eMVP\)
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: kendai
• Re: question about thread creation
  • From: Valter Minute
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: kendai
• Re: question about thread creation
  • From: Remi de Gravelaine
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: question about thread creation
  • From: Valter Minute
• Re: question about thread creation
  • From: Remi de Gravelaine
• Re: question about thread creation
  • From: Zhiqiang Li
• CE6 driver porting
  • From: Youraputz
• Memory monitor
  • From: Mhaxx
• Debugging .Net Applications
  • From: Dennis Borde
• USB mass storage detection is too slow. (X86 and WinCE 5.0)
  • From: Javier Grijalba
• Re: ROM-only file system
  • From: K. S. Huang
• Re: question about thread creation
  • From: Valter Minute
• Re: Best strategy for a VNC server?
  • From: Valter Minute
• Re: I2C stream interface driver
  • From: jluc07
• Re: PS2 Y-Cable, does not work
  • From: Remi de Gravelaine
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Remi de Gravelaine
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: Best strategy for a VNC server?
  • From: Remi de Gravelaine
• Restrictions in oal?
  • From: max
• dll loading problem
  • From: Zhiqiang Li
• Re: Is zero-length USB packet supported in Windows CE 5.0 ?
  • From: Catrice
• Re: Best strategy for a VNC server?
  • From: Luc Cool
• WINCE 5.0 USB host - mass storage device compatibility
  • From: david
• ROM-only file system
  • From: soreeye
• Is zero-length USB packet supported in Windows CE 5.0 ?
  • From: Daniel
• program memory low with ping
  • From: Abhishek
• Re: Why aren't the DLLs copied to the release dir?
  • From: Doug Cook [MSFT]
• Re: 6.0 run-time image viewer reliable?
  • From: Steve Otteson [MSFT]
• PS2 Y-Cable, does not work
  • From: B.R.Liao
• Please recommend some Windows Mobile training courses
  • From: mny . mgr
• Re: USB hubs known to work with CE 5.0
  • From: Silver
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Michael Chen [MS]
• Re: Mass Storage gets slow after eraseing/copying files for many times.
  • From: C Hecko
• Re: pTOC and global variables
  • From: JSS
• USB hubs known to work with CE 5.0
  • From: Bill T
• Re: Intel NIC drivers in PB5
  • From: Remi de Gravelaine
• Re: Mass Storage gets slow after eraseing/copying files for many times.
  • From: Silver
• Re: I2C stream interface driver
  • From: Silver
• Re: Intel NIC drivers in PB5
  • From: Ulrich Eckhardt
• 6.0 run-time image viewer reliable?
  • From: Dan McCarty
• I can see it(myDLL.dll) inside file viewer, but it is not in remote process viewer, nor in kernel tracker. please help
  • From: Zhiqiang Li
• Re: CE 6 Emulator Standalone - .cem ??
  • From: Barry Bond [MSFT]
• Re: vs2005 and .rel files
  • From: Barry Bond [MSFT]
• tutorial question
  • From: Henry Markov
• pTOC and global variables
  • From: JSS
• Re: Intel NIC drivers in PB5
  • From: Remi de Gravelaine
• Re: Intel NIC drivers in PB5
  • From: Ulrich Eckhardt
• Re: ATERM pour DOS
  • From: Remi de Gravelaine
• ATERM pour DOS
  • From: Remi de Gravelaine
• Intel NIC drivers in PB5
  • From: Ulrich Eckhardt
• Re: 'CE Target Control' is disabled
  • From: Bruce Eitman [eMVP]
• Re: Why aren't the DLLs copied to the release dir?
  • From: Ulrich Eckhardt
• Re: about Bluetooth driver
  • From: vlick
• RE: Debugger wont connect after re-install
  • From: Rob
• Re: vs2005 and .rel files
  • From: kristof . vandenbussche
• Re: USB is not recognized+wince
  • From: Henrik Viklund
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: Best strategy for a VNC server?
  • From: Remi de Gravelaine
• Re: USB is not recognized+wince
  • From: kracks
• Re: vs2005 and .rel files
  • From: voidcoder
• Re: vs2005 and .rel files
  • From: Helge Kruse
• File Download Bug?!
  • From: Pretissimo2002
• Re: ActiveSync over RNDIS USB function in CE 5.0?
  • From: voidcoder
• Re: vs2005 and .rel files
  • From: voidcoder
• Re: ActiveSync over RNDIS USB function in CE 5.0?
  • From: Henrik Viklund
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• Re: 'CE Target Control' is disabled
  • From: Bruce Eitman [eMVP]
• Mass Storage gets slow after eraseing/copying files for many times.
  • From: C Hecko
• about Bluetooth driver
  • From: LDW
• Re: VirtualCopy error
  • From: Silver
• Re: Bug in rtc.c in SMDK2440A BSP
  • From: Hermes
• Re: Platform builder download / CD
  • From: Bruce Eitman [eMVP]
• Re: NETCFV2 not supported on SH3 platform
  • From: Bruce Eitman [eMVP]
• ActiveSync over RNDIS USB function in CE 5.0?
  • From: SteveK
• Re: Question with Bib/Reg files and DIRS projeccts
  • From: embdev
• Re: CE 6 Emulator Standalone - .cem ??
  • From: raiderdav
• Re: Multiple Key Events
  • From: voidcoder
• Re: Loaded hive from flash, now HIDs don't work
  • From: voidcoder
• Re: Bug in rtc.c in SMDK2440A BSP
  • From: Sean Kelleher [MSFT]
• Re: Why aren't the DLLs copied to the release dir?
  • From: Doug Cook [MSFT]
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: .·:m·a·r·l·a:·.
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: .·:m·a·r·l·a:·.
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: .·:m·a·r·l·a:·.
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: .·:m·a·r·l·a:·.
• Re: Best strategy for a VNC server?
  • From: Luc Cool
• Re: Application Crash without WM_DESTROY
  • From: embdev
• Re: CE 6 Emulator Standalone - .cem ??
  • From: Barry Bond [MSFT]
• Re: question about thread creation
  • From: Zhiqiang Li
• vs2005 and .rel files
  • From: Kristof Vandenbussche
• Re: question about thread creation
  • From: Zhiqiang Li
• Re: Best strategy for a VNC server?
  • From: Kristof Vandenbussche
• Re: Best strategy for a VNC server?
  • From: Valter Minute
• Re: question about thread creation
  • From: Valter Minute
• Re: Best strategy for a VNC server?
  • From: Remi de Gravelaine
• Re: Application Crash without WM_DESTROY
  • From: karthick
• How to view/analyse logs created by "Remote Performance Monitor"?
  • From: Gildas
• question about thread creation
  • From: Zhiqiang Li
• Re: OS Timer Causes System to Hang
  • From: sean@xxxxxxx
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: kendai
• Re: USB host port 2
  • From: Rob
• Re: CE 6 Emulator Standalone - .cem ??
  • From: Valter Minute
• Re: OS Timer Causes System to Hang
  • From: Valter Minute
• CE 6 Emulator Standalone - .cem ??
  • From: raiderdav
• OS Timer Causes System to Hang
  • From: sean@xxxxxxx
• Re: problem with InjectDLL
  • From: Zhiqiang Li
• Re: Bootloader for Intel Ethernet?
  • From: Andy
• Re: problem with InjectDLL
  • From: Zhiqiang Li
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• Re: Best strategy for a VNC server?
  • From: Valter Minute
• Re: problem with InjectDLL
  • From: Valter Minute
• Re: C++ exception before WinMain
  • From: Valter Minute
• Best strategy for a VNC server?
  • From: Remi de Gravelaine
• Re: C++ exception before WinMain
  • From: Remi de Gravelaine
• problem with InjectDLL
  • From: Zhiqiang Li
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: Platform builder download / CD
  • From: Valter Minute
• Platform builder download / CD
  • From: DRG123
• Why aren't the DLLs copied to the release dir?
  • From: Ulrich Eckhardt
• RE: Debugger wont connect after re-install
  • From: Rob
• Associate network packets with application
  • From: Piotr Wojcicki
• Re: C++ exception before WinMain
  • From: Valter Minute
• Re: 128 MB RAM configuration issue
  • From: Aravind
• Re: NETCFV2 not supported on SH3 platform
  • From: AlesP
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Marco Contenti
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: C++ exception before WinMain
  • From: Remi de Gravelaine
• Re: NETCFV2 not supported on SH3 platform
  • From: Valter Minute
• Re: C++ exception before WinMain
  • From: Valter Minute
• Re: Bootloader for Intel Ethernet?
  • From: Andy
• Re: How to use hive-based registry
  • From: Cheng Shi
• Re: C++ exception before WinMain
  • From: Remi de Gravelaine
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: alexquisi
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: How to use hive-based registry
  • From: Cheng Shi
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• Re: Data Abort in GWES.EXE
  • From: Vinoth
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• Re: pcm sound out in eboot
  • From: paopaoer
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Emulator using Ethernet in 5.0
  • From: Shabbir
• Re: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Michael Chen [MS]
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: NETCFV2 not supported on SH3 platform
  • From: Bruce Eitman [eMVP]
• NETCFV2 not supported on SH3 platform
  • From: ales.petrisic@xxxxxxxxx
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: Data Abort in GWES.EXE
  • From: Chitra
• Re: 128 MB RAM configuration issue
  • From: Bruce Eitman [eMVP]
• Re: User Defined Environment Variable
  • From: Bruce Eitman [eMVP]
• Re: Question with Bib/Reg files and DIRS projeccts
  • From: Bruce Eitman [eMVP]
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: Bruce Eitman [eMVP]
• Re: Usage of SetSystemPowerState
  • From: Bruce Eitman [eMVP]
• Re: WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Bruce Eitman [eMVP]
• Re: reloading the driver after resume
  • From: Piyush
• Re: Emulator using Ethernet in 5.0
  • From: Sean Kelleher [MSFT]
• Unable to use RTCClient API
  • From: ever
• Re: VirtualCopy error
  • From: shiju
• Re: Application Crash without WM_DESTROY
  • From: embdev
• Re: VirtualCopy error
  • From: Silver
• Re: Wince application closes abrubtly
  • From: embdev
• Question with Bib/Reg files and DIRS projeccts
  • From: embdev
• Re: VirtualCopy error
  • From: shiju
• Re: User Defined Environment Variable
  • From: Silver
• Re: VirtualCopy error
  • From: Silver
• Re: VirtualCopy error
  • From: shiju
• Re: problem concerning the creation of thread running in user
  • From: Zhiqiang Li
• User Defined Environment Variable
  • From: reshamlal
• Re: CeDeleteRecord() problem
  • From: Steve Kelley
• Re: problem concerning the creation of thread running in user
  • From: Karel Danihelka [MS]
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: Karel Danihelka [MS]
• Re: C++ exception before WinMain
  • From: Valter Minute
• Re: how to set WINCEDEBUG=debug? (not in batch file)
  • From: Silver
• Re: Calling crypto APIs from OAL (OEMCertifyModule) in CE 5.0
  • From: Dylan DSilva \(MS\)
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: C++ exception before WinMain
  • From: Remi de Gravelaine
• Application Crash without WM_DESTROY
  • From: karthick
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Marco Contenti
• VirtualCopy error
  • From: shiju
• Re: C++ exception before WinMain
  • From: Valter Minute
• Re: Network projector in CE 6.0
  • From: jan.kindt@xxxxxxxxx
• Re: 128 MB RAM configuration issue
  • From: Aravind
• Re: C++ exception before WinMain
  • From: Remi de Gravelaine
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: APSFlorida
• Re: displayer driver screen size problem?
  • From: Jack
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: Henrik Viklund
• using the the Platform Builder to recover info from a half-dead PDA (please reply, I am quite desperate)
  • From: .·:m·a·r·l·a:·.
• Re: code hangs after loading hd.dll
  • From: David
• how to set WINCEDEBUG=debug? (not in batch file)
  • From: zzhikang
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: Doug Cook [MSFT]
• Re: Error: Too much data space used by DLL's in MODULES section
  • From: Doug Cook [MSFT]
• Re: C++ exception before WinMain
  • From: Valter Minute
• Re: code hangs after loading hd.dll
  • From: David
• Re: displayer driver screen size problem?
  • From: Anthony Pellerin
• Re: How to use hive-based registry
  • From: Anthony Pellerin
• Re: 128 MB RAM configuration issue
  • From: Anthony Pellerin
• C++ exception before WinMain
  • From: Remi de Gravelaine
• Re: Help needed to add telnet reg settings to my emulator version
  • From: voidcoder
• Re: problem concerning the creation of thread running in user
  • From: Valter Minute
• Re: How to use hive-based registry
  • From: Cheng Shi
• Re: Where / How is device.exe built ?
  • From: Rob
• Re: reloading the driver after resume
  • From: voidcoder
• problem concerning the creation of thread running in user
  • From: Zhiqiang Li
• 128 MB RAM configuration issue
  • From: Aravind
• Resuming a device from a suspended state
  • From: Treadstone
• Resuming a device from a suspended state
  • From: Treadstone
• Re: How to use hive-based registry
  • From: Anthony Pellerin
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: Henrik Viklund
• Re: question about SYSINTR_RESCHED and scheduler
  • From: Zhiqiang Li
• Re: Bootloader for Intel Ethernet?
  • From: Remi de Gravelaine
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: alexquisi
• data abort in gwes.exe for Tiny kernel
  • From: Arun
• Data Abort in GWES.EXE
  • From: Chitra
• Re: How to use hive-based registry
  • From: Cheng Shi
• Re: reloading the driver after resume
  • From: Piyush
• How to use hive-based registry
  • From: Cheng Shi
• Re: question about SYSINTR_RESCHED and scheduler
  • From: Steve Maillet \(eMVP\)
• Re: Appending tens of files into NK image
  • From: Michael J. Salamone
• Windows CE4.2 RES2EXE crash and error -1073741819
  • From: simon
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: APSFlorida
• Re: Appending tens of files into NK image
  • From: Steve Maillet \(eMVP\)
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: zhoumc
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Doug Cook [MSFT]
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: Doug Cook [MSFT]
• Re: Appending tens of files into NK image
  • From: Sparks
• Re: Appending tens of files into NK image
  • From: <ctacke/>
• Appending tens of files into NK image
  • From: Sparks
• Re: Help needed to add telnet reg settings to my emulator version
  • From: voidcoder
• Re: question about SYSINTR_RESCHED and scheduler
  • From: Zhiqiang Li
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: voidcoder
• Re: displayer driver screen size problem?
  • From: voidcoder
• Re: Help needed to add telnet reg settings to my emulator version 2 bu
  • From: voidcoder
• Re: Accessing Frame Buffer from User App
  • From: voidcoder
• Re: reloading the driver after resume
  • From: voidcoder
• Re: Usage of SetSystemPowerState
  • From: Treadstone
• RE: error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: Michael Chen [MS]
• Re: Making Ethernet work on DB1100 (MIPS) ie. "Product Ethernet"
  • From: Doug Cook [MSFT]
• error: The debugger KITL packet receive has timed out (looks like fail at kitl data command 0x2)
  • From: kendai
• Re: WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Doug Cook [MSFT]
• Re: WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Doug Cook [MSFT]
• Re: Wince application closes abrubtly
  • From: Paul G. Tobey [eMVP]
• problem attaching to target
  • From: Luke Alcatel
• Re: Wince application closes abrubtly
  • From: Paul G. Tobey [eMVP]
• Re: WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Paul G. Tobey [eMVP]
• Re: WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Sergei R
• Re: Where / How is device.exe built ?
  • From: Dean Ramsier
• Re: question about SYSINTR_RESCHED and scheduler
  • From: Dean Ramsier
• Re: WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Paul G. Tobey [eMVP]
• question about SYSINTR_RESCHED and scheduler
  • From: Zhiqiang Li
• CE5.0 PC Card Bus Driver PDD Documentation
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Help needed with release driver
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: How much memory?
  • From: Bruce Eitman [eMVP]
• Re: Help needed with release driver
  • From: maite
• Re: Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• NK Kernel debugchk error in schedule.c
  • From: Chitra
• Re: WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Bruce Eitman [eMVP]
• displayer driver screen size problem?
  • From: kavin
• Re: WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Henrik Viklund
• ppp and software flow control
  • From: Dennis Borde
• Re: Help needed with release driver
  • From: Andrew at Plextek (www.plextek.co.uk)
• WinCE6: Build System - A solution for conditional statements in "sources" ?
  • From: Olivier M
• Help needed with release driver
  • From: maite
• Re: Soft Input Panel
  • From: Valter Minute
• Soft Input Panel
  • From: Paolo Alberto Cremonese
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Valter Minute
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Valter Minute
• Calling crypto APIs from OAL (OEMCertifyModule) in CE 5.0
  • From: MV
• Re: limitation of VirtualAlloc calls?
  • From: Jack
• Re: Problems with 2006 rollup QFE for 5.0
  • From: Arnie
• Re: How much memory?
  • From: Arnie
• Re: Sysgen error in directx after QFE
  • From: Arnie
• Re: replicating build environments
  • From: Arnie
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: david
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: K. S. Huang
• Re: reloading the driver after resume
  • From: Piyush
• Re: WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Sergei R
• Re: WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Paul G. Tobey [eMVP]
• Re: Assembly for CE?
  • From: Steve Maillet \(eMVP\)
• WinCE 5 - clone catalog item again - unable to do via PB ?
  • From: Sergei R
• Re: Flash File system FMD Erase Block
  • From: Henrik Viklund
• Re: Remove *.wav *.bmp
  • From: Dean Ramsier
• Re: Flash File system FMD Erase Block
  • From: Steve Maillet \(eMVP\)
• Re: Flash File system FMD Erase Block
  • From: Paul G. Tobey [eMVP]
• Re: Is zero-length USB packet supported in Windows CE 5.0 ?
  • From: Sameer Moidu \(MS\)
• Re: Flash File system FMD Erase Block
  • From: Henrik Viklund
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: Henrik Viklund
• Bug in rtc.c in SMDK2440A BSP
  • From: Hermes
• Re: ActiveSync on COM4 !!!
  • From: Bruce Eitman [eMVP]
• Re: problem with typically HelloWorld application
  • From: Dean Ramsier
• Re: ActiveSync on COM4 !!!
  • From: Paul G. Tobey [eMVP]
• Re: Serial port driver bug
  • From: Remi de Gravelaine
• So you find ntirp.c
  • From: Miro Barsocchi
• Re: Flash File system FMD Erase Block
  • From: Steve Maillet \(eMVP\)
• Re: WinCE Symbol device
  • From: mjuricek@xxxxxxxxx
• Re: Calling xxx_SetProcPermissions in CE 6.0 edm.dll
  • From: Sue Loh [MS]
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: zhoumc
• Re: Which JATG probe ?
  • From: Steve Maillet \(eMVP\)
• Enabling DMA into SMSC LAN9118 driver rel.1.08
  • From: Panino
• Re: ActiveSync on COM4 !!!
  • From: <ctacke/>
• Re: Usage of SetSystemPowerState
  • From: jojje . ander
• Re: Usage of SetSystemPowerState
  • From: jojje . ander
• Re: linker settings
  • From: Helge Kruse
• Re: Usage of SetSystemPowerState
  • From: Bruce Eitman [eMVP]
• Re: CeDeleteRecord() problem
  • From: Jeremy
• Re: Ohci2 suspend/resume memory leak
  • From: jojje . ander
• Re: CeDeleteRecord() problem
  • From: Steve Kelley
• Re: USB is not recognized+wince
  • From: Anthony Pellerin
• Loading problem, WinCE 6.0 dm9000 Ndis driver
  • From: Bjorn Hall
• CE4.2 InternetReadFile oddities + PPP debug.
  • From: DT_TouchStar
• Re: Need Help to set breakpoint to debug the code
  • From: Chitra
• Usage of SetSystemPowerState
  • From: Treadstone
• Re: Issues with Hive based Registry on NOR flash
  • From: aalok
• Re: Serial port driver bug
  • From: Remi de Gravelaine
• Re: Platform builder packets data
  • From: Michael Chen [MS]
• Is zero-length USB packet supported in Windows CE 5.0 ?
  • From: Catrice
• Re: Flash File system FMD Erase Block
  • From: K. S. Huang
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: max
• Flash File system FMD Erase Block
  • From: karthick
• USB is not recognized+wince
  • From: kracks
• Re: Need Help to set breakpoint to debug the code
  • From: Chitra
• Re: Need Help to set breakpoint to debug the code
  • From: Chitra
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: K. S. Huang
• Re: Garbage Collection in the FAL of NAND Flash Driver
  • From: Gary Swalling
• Re: Cannot download NK.bin with PB
  • From: Gary Swalling
• Re: Need Help to set breakpoint to debug the code
  • From: Ross Jordan [MSFT]
• Re: Suspend Problem..
  • From: Mauricio Sousa (Connec Brasil)
• Re: Does ISLP2NDS.DLL work with ZCOM XI-825 ?
  • From: Kevin Chin
• Re: CE5.0 device as Router (wireless accespoint)
  • From: Kevin Chin
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: <ctacke/>
• Re: WinCE 6.0 / PB6 very slow builds?
  • From: Valter Minute
• Re: Unsupported Device Type
  • From: Jules . Karim
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: Bruce Eitman [eMVP]
• Re: embedded web server over ActiveSync?
  • From: John Spaith [MS]
• Re: Ohci2 suspend/resume memory leak
  • From: jojje . ander
• Re: Need Help to set breakpoint to debug the code
  • From: Anthony Pellerin
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: max
• Need Help to set breakpoint to debug the code
  • From: Chitra
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: <ctacke/>
• Ohci2 suspend/resume memory leak
  • From: jojje . ander
• Re: about how to using of touch screen driver
  • From: Valter Minute
• Re: USB mass storage
  • From: Henrik Viklund
• Re: Issues with Hive based Registry on NOR flash
  • From: karthick
• Re: Unsupported Device Type
  • From: Ulrich Eckhardt
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: max
• Unsupported Device Type
  • From: Jules . Karim
• Issues with HIve based Registry
  • From: aalok
• Re: reloading the driver after resume
  • From: Piyush
• ActiveSync connection problem after reboot
  • From: Hermes
• embedded web server over ActiveSync?
  • From: Skin Diver
• Re: problem with typically HelloWorld application
  • From: Tom
• Re: How to set time zone
  • From: YDLU
• Re: problem with typically HelloWorld application
  • From: Bruce Eitman [eMVP]
• Re: problem with typically HelloWorld application
  • From: Dean Ramsier
• Re: PlatforMBuilder+SDK
  • From: Doug Cook [MSFT]
• Re: link problem with DeviceIOControl in driver
  • From: Bruce Eitman [eMVP]
• Re: USB mass storage
  • From: Henrik Viklund
• problem with typically HelloWorld application
  • From: Tom
• Re: ceqfecheck utility
  • From: Bruce Eitman [eMVP]
• Re: link problem with DeviceIOControl in driver
  • From: swc
• Re: KITL debug services - KDBG problem
  • From: kendai
• Re: reloading the driver after resume
  • From: Bruce Eitman [eMVP]
• Re: link problem with DeviceIOControl in driver
  • From: Bruce Eitman [eMVP]
• link problem with DeviceIOControl in driver
  • From: swc
• USB Disk On Key
  • From: ohady
• PlatforMBuilder+SDK
  • From: Mauro Savoiardo
• Re: Network projector in CE 6.0
  • From: jan.kindt@xxxxxxxxx
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: <ctacke/>
• Re: Which JATG probe ?
  • From: Alex Malamud
• limitation of VirtualAlloc calls?
  • From: Jack
• linker settings
  • From: Helge Kruse
• Re: How to resume ce 5 from pxa27x deep-sleep mode
  • From: Bruce Eitman [eMVP]
• Re: Webcam :-(
  • From: Raheem
• Re: Webcam :-(
  • From: Rob
• Re: Webcam :-(
  • From: <ctacke/>
• How to resume ce 5 from pxa27x deep-sleep mode
  • From: max
• Re: Platform builder packets data
  • From: Henrik Viklund
• RE: Webcam :-(
  • From: Raheem
• Re: Platform builder packets data
  • From: Henrik Viklund
• Issues with Hive based Registry on NOR flash
  • From: aalok
• Re: HOW TO ADD ACTIVE SYNC - OR HOW TO GET IT TO WORK
  • From: Dennis Borde
• Re: Which JATG probe ?
  • From: Anthony Pellerin
• Re: Platform builder packets data
  • From: George H.
• ceqfecheck utility
  • From: vipin . 84 . sharma
• Re: Which JATG probe ?
  • From: Anthony Pellerin
• reloading the driver after resume
  • From: Piyush
• Re: Remove *.wav *.bmp
  • From: Dennis Borde
• Re: Garbage Collection in the FAL of NAND Flash Driver
  • From: Henrik Viklund
• Re: CEPC Porting Issues...
  • From: Dumb Guy
• code hangs after loading hd.dll
  • From: Chitra
• Garbage Collection in the FAL of NAND Flash Driver
  • From: himangshu
• Re: Why booting time is so long when FAT is full?
  • From: Sachin Patel [MS]
• Re: Platform builder packets data
  • From: Michael Chen [MS]
• Re: KITL debug services - KDBG problem
  • From: kendai
• Re: KITL debug services - KDBG problem
  • From: kendai
• Re: KITL debug services - KDBG problem
  • From: kendai
• Re: Windows CE 6.0 remote tools broken?
  • From: Yan Sun [MS]
• Re: Wince 5.0 Daylight Savings (DST) ISSUE
  • From: Paul G. Tobey [eMVP]
• Re: SmartcardT1Request
  • From: Keaven Pineau
• Re: Enumerate network resources
  • From: Alexander T. Bussmann [MSFT]
• Problem with AMD Rumba Design Reference
  • From: Mauricio Sousa (Connec Brasil)
• Re: Windows CE 6.0 remote tools broken?
  • From: Yan Sun [MS]
• Re: about how to using of touch screen driver
  • From: Dean Ramsier
• Re: Remove *.wav *.bmp
  • From: Dean Ramsier
• Re: problem with pci bus
  • From: Travis Hobrla [MS]
• Re: CEPC Porting Issues...
  • From: Travis Hobrla [MS]
• Re: Enumerate network resources
  • From: Alexander T. Bussmann [MSFT]
• Re: USB 2.0 ports not working
  • From: Mario
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: USB 2.0 ports not working
  • From: Mario
• Re: CEPC Porting Issues...
  • From: Orca
• Re: Multi-ICE problem.
  • From: Anthony Pellerin
• Re: problem with pci bus
  • From: Ulrich Eckhardt
• problem with pci bus
  • From: Tom
• Multi-ICE problem.
  • From: Arun
• Re: User Management
  • From: <ctacke/>
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: How to set time zone
  • From: Luke Dunstan
• Re: Platform builder packets data
  • From: Henrik Viklund
• Re: USB 2.0 ports not working
  • From: Mario
• Re: USB mass storage
  • From: Henrik Viklund
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: USB mass storage
  • From: Bølla
• Re: Remove *.wav *.bmp
  • From: Dennis Borde
• Re: USB 2.0 ports not working
  • From: Mario
• Re: CreateDialog error 0x57
  • From: dominique valois
• Re: WinCE 5.0 Problems at BootUp x86 HDD
  • From: Remi de Gravelaine
• Re: PmUpdatePowerStatus & battery driver
  • From: max
• Re: HOW TO ADD ACTIVE SYNC - OR HOW TO GET IT TO WORK
  • From: Dennis Borde
• Re: about how to using of touch screen driver
  • From: Cheng Shi
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: Henrik Viklund
• User Management
  • From: Albert Taucher
• Re: How to set time zone
  • From: Cheng Shi
• Re: IPSM and MSFLASH on CE5.0
  • From: soreeye
• SDIO wireless driver depends the Activesync
  • From: slyzhang
• Re: WinCE 5.0 Problems at BootUp x86 HDD
  • From: Doug Cook [MSFT]
• Detect USB Port
  • From: sebastian jakob
• Re: Windows CE 6.0 remote tools broken?
  • From: B-Dawg
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: voidcoder
• Re: Control Panel landscape applet sizes in WinCE 5.0
  • From: Bruce Eitman [eMVP]
• Re: How to switch default usb client function driver on wince 5.0 at runtime?
  • From: Bruce Eitman [eMVP]
• How to switch default usb client function driver on wince 5.0 at runtime?
  • From: zhoumc
• Re: Problem in bringing up (WinCE5.0) kernel on SMDK2440A board
  • From: Manjunath
• Re: How to set time zone
  • From: Luke Dunstan
• USB Host controller interrupt problem on Davici TMS320DM6446
  • From: raja . derkaiser
• USB Host controller on Davici TMS320DM6446
  • From: raja . derkaiser
• Re: IPSM and MSFLASH on CE5.0
  • From: soreeye
• Re: why wince 6.0 can't open .cec file?
  • From: Dumb Guy
• Re: CEPC Porting Issues...
  • From: Dumb Guy
• Re: CEPC Porting Issues...
  • From: Samuel Phung \(eMVP\)
• RE: KITL debug services - KDBG problem
  • From: Vinoth
• Re: Data Abort when interrupt is enabled
  • From: Aby
• Re: Problem in bringing up (WinCE5.0) kernel on SMDK2440A board
  • From: Chitra
• Re: Wince 5.0 Daylight Savings (DST) ISSUE
  • From: William W.
• WinCE 5.0 Problems at BootUp x86 HDD
  • From: Carnage
• Re: How to set time zone
  • From: Cheng Shi
• Re: CreateDialog error 0x57
  • From: voidcoder
• Re: Control Panel landscape applet sizes in WinCE 5.0
  • From: Dean Ramsier
• Control Panel landscape applet sizes in WinCE 5.0
  • From: Hermes
• Re: WinCE Symbol device
  • From: Bruce Eitman [eMVP]
• Re: WinCE Symbol device
  • From: <ctacke/>
• Re: Wince 5.0 USB Wireless?
  • From: Bruce Eitman [eMVP]
• Re: WinCE Symbol device
  • From: mjuricek@xxxxxxxxx
• Re: Problem in bringing up (WinCE5.0) kernel on SMDK2440A board
  • From: Manjunath
• Re: Looking for SPI driver in WinCE 5.0
  • From: Valter Minute
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: IPSM and MSFLASH on CE5.0
  • From: Paul G. Tobey [eMVP]
• Re: USB 2.0 ports not working
  • From: Mario
• Re: How to start an application in system tray
  • From: Paul G. Tobey [eMVP]
• CreateDialog error 0x57
  • From: dominique valois
• Re: PmUpdatePowerStatus & battery driver
  • From: Dean Ramsier
• Re: HOW TO ADD ACTIVE SYNC - OR HOW TO GET IT TO WORK
  • From: Dean Ramsier
• Re: Looking for SPI driver in WinCE 5.0
  • From: Valter Minute
• Re: replicating build environments
  • From: Orca
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: Remove *.wav *.bmp
  • From: Dean Ramsier
• Re: USB 2.0 ports not working
  • From: Mario
• Re: WinCE Symbol device
  • From: Bruce Eitman [eMVP]
• Re: build process of ce 6.0
  • From: Remi de Gravelaine
• Re: replicating build environments
  • From: ellewellyn2003
• Remove *.wav *.bmp
  • From: Dennis Borde
• Re: build process of ce 6.0
  • From: Valter Minute
• Re: HOW TO ADD ACTIVE SYNC - OR HOW TO GET IT TO WORK
  • From: Dennis Borde
• Re: How to use 128 MB flash?
  • From: Bruce Eitman [eMVP]
• Re: S3C2410 Nand Boot
  • From: Marcelo Silva
• Re: Failed to use remote tools via ActiveSync in Windows CE6.0.
  • From: Anthony Pellerin
• Re: S3C2410 Nand Boot
  • From: Anthony Pellerin
• Re: CeDeleteRecord() problem
  • From: Steve Kelley
• Re: Problem in bringing up (WinCE5.0) kernel on SMDK2440A board
  • From: Chitra
• Re: S3C2410 Nand Boot
  • From: Marcelo Silva
• Re: USB 2.0 ports not working
  • From: Valter Minute
• Re: Data Abort when interrupt is enabled
  • From: Chitra
• Re: Assembly for CE?
  • From: Valter Minute
• PmUpdatePowerStatus & battery driver
  • From: max
• Re: Assembly for CE?
  • From: Ulrich Eckhardt
• USB 2.0 ports not working
  • From: Mario
• Re: Debugging with Windows CE and Kontron ETX-PM board
  • From: Ulrich Eckhardt
• Re: S3C2410 Nand Boot
  • From: Anthony Pellerin
• Re: Wince 5.0 USB Wireless?
  • From: Anthony Pellerin
• Re: about how to using of touch screen driver
  • From: Valter Minute
• Re: How to set time zone
  • From: Luke Dunstan
• KITL debug services - KDBG problem
  • From: George H.
• Re: about how to using of touch screen driver
  • From: Cheng Shi
• Re: replicating build environments
  • From: Valter Minute
• Re: WinCE50 FAT16 test...
  • From: Valter Minute
• RE: Can't boot image with USB storage support
  • From: Maha_ish
• Re: about how to using of touch screen driver
  • From: Valter Minute
• How to set time zone
  • From: Cheng Shi
• Re: How to use 128 MB flash?
  • From: vlick
• about how to using of touch screen driver
  • From: Cheng Shi
• Re: System language in WinCE 6.0 device
  • From: Michael Reim
• Re: IPSM and MSFLASH on CE5.0
  • From: soreeye
• Re: replicating build environments
  • From: Doug Cook [MSFT]
• WinCE50 FAT16 test...
  • From: 阿隆西
• How to start an application in system tray
  • From: Piyush
• Re: replicating build environments
  • From: Steve Maillet \(eMVP\)
• Re: replicating build environments
  • From: <ctacke/>
• Re: problem with graphical shell
  • From: Tom
• Re: problem with graphical shell
  • From: Tom
• Re: How do you know if your image is running from ram instead of flash?
  • From: sean
• replicating build environments
  • From: ellewellyn2003
• Re: problem with graphical shell
  • From: Tom
• Re: USB mass storage
  • From: Henrik Viklund
• Re: How do you know if your image is running from ram instead of flash?
  • From: Henrik Viklund
• Re: USB mass storage
  • From: Sameer Moidu \(MS\)
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: <ctacke/>
• Re: CERTMOD. How to?
  • From: Ross Jordan [MSFT]
• Re: March 1, 2007 bug
  • From: Paul G. Tobey [eMVP]
• March 1, 2007 bug
  • From: william . thorpe . b
• Re: noload vs activatedeviceEx
  • From: Steve Maillet \(eMVP\)
• noload vs activatedeviceEx
  • From: Skin Diver
• Re: Jflashmm dat file for 256P30 ??
  • From: Skin Diver
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: Jules . Karim
• Re: FlashROM as a disk in CE 5.0
  • From: Gary Swalling
• Re: Launch a program with Command line
  • From: Paul G. Tobey [eMVP]
• Re: How do you know if your image is running from ram instead of flash?
  • From: sean
• Launch a program with Command line
  • From: ydlu
• Re: struggling to get the big picture
  • From: Bruce Eitman [eMVP]
• Re: WinCE Symbol device
  • From: mjuricek@xxxxxxxxx
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: Jules . Karim
• Re: Windows CE and third party applications
  • From: Steve Maillet \(eMVP\)
• Re: Data Abort when interrupt is enabled
  • From: Aby
• Re: CERTMOD. How to?
  • From: MV
• Re: WinCE Symbol device
  • From: <ctacke/>
• WinCE Symbol device
  • From: mjuricek
• Re: Jflashmm dat file for 256P30 ??
  • From: Bruce Eitman [eMVP]
• Re: How to use 128 MB flash?
  • From: Bruce Eitman [eMVP]
• Re: Memeory integrity test
  • From: Bruce Eitman [eMVP]
• Re: Windows CE and third party applications
  • From: Jack
• Re: C++ exceptions in drivers
  • From: Jack
• Re: problem with graphical shell
  • From: Tom
• S3C2410 Nand Boot
  • From: Marcelo Silva
• Re: the relationship between embedded visual c++ and platform builder
  • From: Andrew at Plextek (www.plextek.co.uk)
• Re: Unknow "fatal application error"
  • From: Mhaxx
• Re: Unknow "fatal application error"
  • From: voidcoder
• Re: DeviceIOControl problem data exchange between ap and driver
  • From: orafrank
• Re: C++ exceptions in drivers
  • From: Valter Minute
• Re: How do you know if your image is running from ram instead of flash?
  • From: Henrik Viklund
• C++ exceptions in drivers
  • From: dev15
• Unknow "fatal application error"
  • From: Mhaxx
• Re: CERTMOD. How to?
  • From: Ross Jordan [MSFT]
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: voidcoder
• Re: organizing drivers and tools into the platform builder tree
  • From: F.Reither
• Re: CERTMOD. How to?
  • From: MV
• MP3 codec in windows mobile 5
  • From: DRG123
• Re: Pause the MP3,MP4 before system suspend
  • From: Doug Cook [MSFT]
• Re: organizing drivers and tools into the platform builder tree
  • From: Doug Cook [MSFT]
• Memeory integrity test
  • From: Anwar
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: <ctacke/>
• Re: WinCE 5.00 Net CF problem "Unable to start program"
  • From: Jules . Karim
• Re: the relationship between embedded visual c++ and platform builder
  • From: <ctacke/>
• the relationship between embedded visual c++ and platform builder
  • From: bohemistanbul
• Re: bug in using cabwiz to generate super package??
  • From: MADSAM
• Re: CERTMOD. How to?
  • From: Ross Jordan [MSFT]
• Re: How do you know if your image is running from ram instead of flash?
  • From: sean

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(15)