Re: To test the USB Client and Host

Tech-Archive recommends: Fix windows errors by optimizing your registry

serialusbfn.dll is the function driver for the USB function port. You are being asked to supply the class driver for the usb host interface, try usbser.dll

CE does not know anything about the host side of activesync so do not expect that to work. However, there are serial class and function driver samples in CE6.0 that might just work, I have never tried.



Geoff
--

Jeyanthi Jayakumar wrote:
Hi,
We are doing Diagnostic testing of our module which uses PXA270 processor and the OS is WinCE. In actual testing both ports(USB client and Host) are working fine separately(active sync as client and in host port mouse).

Now we want to test the USB Host and Client. For that we are connecting the client port (actually used for active sync) directly to the host port instead of connecting to PC. In the WinCE device we get the message unidentified USB device and it asks for the driver name.

We gave serialusbfn.dll in that but it is saying error installing the driver.

Can anyone help me in this regard.





.

Relevant Pages

  • Re: Communication port
    ... You need to read up a bit on how USB works, I think, especially if that's ... The port itself is useless without a suitable driver running on the host end ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Need to Buy a New Printer That Is Known to Work with RD
    ... I'm not aware of any parallel port printer that doesn't work, ... What host is involved in your arrangement? ... There really isn't a lot to this--either the driver isn't available, ... prevented redirection when certain antivirus apps were running, ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: remote printing
    ... >event log at the host end for messages about a missing ... driver. ... >would try the registry change in the article about DOT4 ... >see those, then the port isn't being redirected, so the ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: USB modem Host driver for Windows CE
    ... If you want to connect a USB modem to your WINCE device USB host port, ... I began to port a WDM driver to WINCE and quickly found out that,there ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Is zero-length USB packet supported in Windows CE 5.0 ?
    ... We are using the BSP as both the host ... Our driver is functioning as the USB host driver and ... We are using ohci2.dll as the USB Host Controller driver. ...
    (microsoft.public.windowsce.platbuilder)