Re: WLAN Zero Config settings is not showing more than four Access
- From: "SergeiR" <srusakov@xxxxxxxx>
- Date: Sat, 17 Feb 2007 00:05:43 -0800
Hi Prabu,
I have added these 2 components as you sugest, but it does not help - here
is the debug output of what happens after inserting usr5421 into usb port of
the device.
.....
750323 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::HubStatusChangeThread - port 5, change = 0x0001, status = 0x0500
750529 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::HubStatusChangeThread - port 6, change = 0x0001, status = 0x0501
750724 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::HubStatusChangeThread - device attached on port 6
750724 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: +CHub(Root tier
0)::AttachDevice - port = 6, fIsLowSpeed = 0
750724 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE,
failures = 0
750724 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures =
0
750724 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT,
failures = 0
750797 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0
750798 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS,
failures = 0
750799 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0, failures =
0
750810 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 0
750811 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0
750812 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0
750812 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures = 0
750813 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0
750814 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE,
failures = 0
750814 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - Select Configuration 0 on
DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step
750814 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG,
failures = 0
750815 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION,
failures = 0
750815 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY,
failures = 0
750815 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: CHub(Root tier
0)::AttachDevice - status =
DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0
750820 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: >>> Loading module rndismp.dll
at address 0x03530000-0x03540000 (RW data at 0x01ED3000-0x01ED3894)
Loaded symbols for
'G:\WINCE500\PBWORKSPACES\WBT50_VIA_EK\RELDIR\VIACN_X86_DEBUG\RNDISMP.DLL'
750867 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: >>> Loading module usb8023.dll
at address 0x03540000-0x03556000 (RW data at 0x01ED5000-0x01ED559F)
Loaded symbols for
'G:\WINCE500\PBWORKSPACES\WBT50_VIA_EK\RELDIR\VIACN_X86_DEBUG\USB8023.DLL'
750979 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: +USBD:OpenPipe, EP: 0x81,
MaxPkt: 16, Type: Interrupt
750979 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: -USBD:OpenPipe success, hPipe
= 284DA0
750980 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: +USBD:OpenPipe, EP: 0x82,
MaxPkt: 512, Type: Bulk
750980 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: -USBD:OpenPipe success, hPipe
= 284F10
750980 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: +USBD:OpenPipe, EP: 0x3,
MaxPkt: 512, Type: Bulk
750980 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: -USBD:OpenPipe success, hPipe
= 284FE0
750980 PID:6bb7ef02 TID:4b9b5fae 0x8b9b5c9c: StartUsbThread
750986 PID:4ba1f76a TID:4b9b5fae 0x8b9b5c9c: DlgMgr: FindDlgItem id 1
returning NULL.
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: ==>NdisInitializeWrapper
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: <==NdisInitializeWrapper
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: ==>NdisMRegisterMiniport:
NdisWrapperHandle 00285190
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: ==>ndisRegisterMiniportDriver:
NdisWrapperHandle 00285190
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: <==ndisRegisterMiniportDriver:
MiniBlock 00285200
750989 PID:6bb7ef02 TID:c25c1c66 0x825da800: NdisMRegisterMiniport:
MiniBlock 00285200
750990 PID:6bb7ef02 TID:c25c1c66 0x825da800: <==NdisMRegisterMiniport:
MiniBlock 00285200, Status 0
750990 PID:6bb7ef02 TID:c25c1c66 0x825da800: InitializeWrapper:
successfully registered as a 4.0 miniport
750990 PID:6bb7ef02 TID:c25c1c66 0x825da800:
750990 PID:6bb7ef02 TID:c25c1c66 0x825da800: ndisMInitializeAdapter:
Miniport 00285418,
750991 PID:6bb7ef02 TID:c25c1c66 0x825da800: ==>ndisQueueMiniportOnDriver:
Miniport 00285418, MiniBlock 00285200
750991 PID:6bb7ef02 TID:c25c1c66 0x825da800: <==ndisQueueMiniportOnDriver:
Miniport 00285418, MiniBlock 00285200, rc 1
750991 PID:6bb7ef02 TID:c25c1c66 0x825da800: RndismpInitialize
750996 PID:6bb7ef02 TID:c25c1c66 0x825da800: +++ LOOKASIDE INITIALIZE +++
[72] bytes, depth [32]
750996 PID:6bb7ef02 TID:c25c1c66 0x825da800: +++ LOOKASIDE INITIALIZE +++
[13] bytes, depth [32]
750996 PID:6bb7ef02 TID:c25c1c66 0x825da800: +++ LOOKASIDE INITIALIZE +++
[29] bytes, depth [32]
750996 PID:6bb7ef02 TID:c25c1c66 0x825da800: RNDISMP: Init Req message
9a0000, Type 2, Length 24, MaxRcv 4096
751000 PID:6bb7ef02 TID:825c1152 0x826389a8: > *** WARNING *** (file
E:\macallan\private\winceos\COMM\ndismods\im\rndis\usb8023\.\rndis.c, line
593)
751000 PID:6bb7ef02 TID:825c1152 0x826389a8: Reducing adapter
MaxTransferSize from 4000h to 1000h
751002 PID:6bb7ef02 TID:c25c1c66 0x825da800: RNDISMP: InitComp: Adapter
540000, Version 1.0, MaxPkt 1, AlignIncr 4, AlignMask fffffffc, MaxXferSize
4096
751002 PID:6bb7ef02 TID:c25c1c66 0x825da800: ==>NdisMSetAttributesEx:
Miniport 00285418
751006 PID:6bb7ef02 TID:825c1152 0x826389a8: QueryComplete: SupportedList:
InfoBufLength 1376 (344 OIDs)
751010 PID:6bb7ef02 TID:c25c1c66 0x825da800:
==>NdisMRegisterAdapterShutdownHandler: Miniport 00285418
751010 PID:6bb7ef02 TID:c25c1c66 0x825da800:
<==NdisMRegisterAdapterShutdownHandler: Miniport 00285418
751019 PID:6bb7ef02 TID:c25c1c66 0x825da800: RNDISMP: Query for
OID_GEN_MAC_OPT not supported by device!
751031 PID:6bb7ef02 TID:c25c1c66 0x825da800: Invalid Set OID (0001021A),
Adapter 540000
751031 PID:6bb7ef02 TID:c25c1c66 0x825da800: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751032 PID:6bb7ef02 TID:a26282e2 0x825e2000: RNDISMP: Query for
OID_GEN_MAC_OPT not supported by device!
751079 PID:6bb7ef02 TID:825dae86 0x825c1ab8: RNDISMP: Query for
OID_GEN_MAC_OPT not supported by device!
751097 PID:6bb7ef02 TID:e25eecb2 0x825c1ab8: Invalid Set OID (00010119),
Adapter 540000
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800:
+OpenIFConfigEx(Comm\USB80231\Parms\TCPIP Handle 0x652F524)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800:
+OpenIFConfig(Comm\USB80231\Parms\TCPIP Handle 0x652F524)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800: Opened registry info for
Comm\USB80231\Parms\TCPIP
751100 PID:6bb7ef02 TID:c25c1c66
0x825da800: -OpenIFConfig(Comm\USB80231\Parms\TCPIP *Handle 0x652F524, BOOL
Ret: 1)
751100 PID:6bb7ef02 TID:c25c1c66
0x825da800: -OpenIFConfigEx(Comm\USB80231\Parms\TCPIP *Handle 0x652F524,
BOOL Ret: 1)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800: *CloseIFConfig(Handle 0xAB240)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800:
+OpenIFConfig(Comm\USB80231\Parms\TCPIP Handle 0x652F4AC)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800: Opened registry info for
Comm\USB80231\Parms\TCPIP
751100 PID:6bb7ef02 TID:c25c1c66
0x825da800: -OpenIFConfig(Comm\USB80231\Parms\TCPIP *Handle 0x652F4AC, BOOL
Ret: 1)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800: +GetGeneralIFConfig(ConfigInfo
0x652F440 Handle 0xAB240)
751100 PID:6bb7ef02 TID:c25c1c66 0x825da800: GetGeneralIFConfig:Unable to
read DefaultGateway value!
751101 PID:6bb7ef02 TID:c25c1c66 0x825da800: GetGeneralIFConfig:Unable to
read DNS value!
751101 PID:6bb7ef02 TID:c25c1c66 0x825da800: GetGeneralIFConfig:Unable to
read WINS value!
751101 PID:6bb7ef02 TID:c25c1c66 0x825da800: -GetGeneralIFConfig(ConfigInfo
0x652F440 Handle 0xAB240 Ret: TRUE)
751101 PID:6bb7ef02 TID:c25c1c66 0x825da800: +GetIFAddrList(NumAddr*
0x652F40C Handle 0xAB240)
751101 PID:6bb7ef02 TID:c25c1c66 0x825da800: *IPAddNTE: calling
ARPDynRegister
751378 PID:6bb7ef02 TID:825c1152 0x826389a8: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751380 PID:6bb7ef02 TID:25869ae 0x82643d84: ZCF:: InfContext [0x282cc0]
created..
751386 PID:6bb7ef02 TID:825c1152 0x826389a8: Adapter 540000: --- Media
Disconnect ---
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: IPAddInterface: PhysicalMedium
== NdisPhysicalMediumWirelessLan
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: IPAddInterface: Wireless LAN
default to no ConnectDampingInterval.
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: IPAddInterface: Wireless LAN
default to no DisconnectDampingInterval.
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: *CloseIFConfig(Handle 0xAB240)
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800:
+OpenIFConfig(Comm\USB80231\Parms\TCPIP Handle 0x652F2D4)
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: Opened registry info for
Comm\USB80231\Parms\TCPIP
751412 PID:6bb7ef02 TID:c25c1c66
0x825da800: -OpenIFConfig(Comm\USB80231\Parms\TCPIP *Handle 0x652F2D4, BOOL
Ret: 1)
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: *CloseIFConfig(Handle 0xAB240)
751412 PID:6bb7ef02 TID:c25c1c66 0x825da800: [NOTIFY] HandleSystemEvent 5
none
751413 PID:6bb7ef02 TID:c25c1c66 0x825da800: DHCP:: $$$ NewDhcpInfo:
0x2835b0
751413 PID:6bb7ef02 TID:c25c1c66 0x825da800: -RequestWLan: Context 3
751413 PID:6bb7ef02 TID:c25c1c66 0x825da800: -IPAddInterface [SUCCESS]
751449 PID:6bb7ef02 TID:8258d1de 0x825e2000: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751474 PID:6bb7ef02 TID:e258d1de 0x825da800: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751475 PID:6bb7ef02 TID:a25dae86 0x825e2000: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751507 PID:6bb7ef02 TID:825c1152 0x826389a8: Set Complete (Oid = 0D01011D)
failure: C0010015
751517 PID:6bb7ef02 TID:225c1e9e 0x825da800: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
751517 PID:6bb7ef02 TID:cba358fa 0x825e2000: NDIS: Adapter USB80231 - NOT
using OPTIMIZED RX handler
at this moment a dilog box pops up [Unidentified usb device] and asks for a
driver name.
Any ideas why your platform recognizes the same usr5421, but mine doesn't ?
Thanks a lot
Sergei R
"prabu" <prabu@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:888CD2C2-B66B-40CF-B080-B160391A0EF8@xxxxxxxxxxxxxxxx
Hi Sergei,
Try to add the following components in OSDesignView:
Device Drivers->USB Function->USB Function Bus Drivers->Netchip NET2280
USB
Functions
Device Drivers->USB Function->USB Function CLients->RNDIS Client
and check it out
"Sergei R" wrote:
Hi Prabu,
you went a lot further than my attempt with the USR5421. Some time ago I
have tried but failed to make this usr usb adapter to work with CE
Windows
CE 5 image. Careful looking did not reveal anything importatnt as a
clue.
Do you have any tricks to share for successfull operation of usr5421 with
Windows CE 5 ?
My image was built using Platform Builder IDE (no command line builds
used,
both cumulative annaul QFEs applied for 2005 and 2006) for VIA based
board
( Luke processor) based on VIA BSP for it, and the following components
were
present in OSDesignView for it (in addition to all the defaulf CEPC
platform
components, which are created in any platform based on CEPC) :
Device drivers->Networking->Local Area Networking->RealtekRTL8139
Communication Services and Networking->Networking-Local Area
Network->Wired
Local Area Network(802.3)
Device Drivers->USB host-> EHCI,OHCI,UHCI
Core OS Services->USB Host Support-> all the default components
EHCI,OHCI,
UHCI and USB driver
Core OS Services->USB Host Support->USB Remote NDIS Class Driver
Communication Services and Networking->Networking-Local Area
Network->Native
Wi-Fi STA
Communication Services and Networking->Networking-Local Area
Network->Wireless LAN(802.11) STA
Communication Services and Networking->Networking Features->EAP,NDIS u
I/O,NDIS,TCP/IP,Winsock
Shell and User Interface->User Interface->Network User Interface
Does the operation of USR5421 require anything else for Windows CE 5 ?
From
what I saw in debug messages in my case, when inserted into usb port,
usr5421 was recognized correctly, but never activated. Do I miss
something
in my platform in comparison with yours ? Platform builder 5 help seems
not
to tell much details about what exactly have to included in a platform to
support usb rndis device like usb5421.
Your advise is highly appreciated. Thanks
Sergei R
"prabu" <prabu@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:A5A7D979-4E2C-4872-9FE0-78555CAC46BB@xxxxxxxxxxxxxxxx
Hi
I am using USR5421 Wireless MAXg USB Adapter in CEPC. I can able to
detect
only 4 Access points at a time. But i have more than 10 Access points
in
my
area. My PC can detect all those access points. I am able to connect to
those
access points which are not listed in My Available WiressNetworks by
adding
those accesspoint details using Addnew prefered networks. After
connected
to
the non listed access points, i was able see my prefered Access point
,But
it replaces one of the previously listed Access points. Seems like i am
able
see only MAXIMUM 4 Access points at a time .
Whether this problem exist in WINCE 5.0 or am i missing any
settings????
Any
one gone through this problem????? Can anybody Help ????
Thanks
Prabu
.
- References:
- Prev by Date: Re: how to make sure that kernel is up
- Next by Date: btscosnd: SCO over HCI USB or BCSP sound quality issue
- Previous by thread: Re: WLAN Zero Config settings is not showing more than four Access
- Next by thread: Re: STRATA flash driver - Not able to persist data
- Index(es):
Relevant Pages
|
