Re: USB not detected - help

Yes. You are absolutely right. I followed the sequence:
1) Download the image.
2) Copy the CAB file using Activesync.
3) Insert the USB cable into the HUB
4) Double tap it.

If I insert the device after installing the cab file, it identifies
the device.

But in real time scenario, I'll connect the gsm module inbuilt. So
while downloading image I want the device to be identified.
How can I do that?

Give me some apt solution. I have done so many work arounds, all but
in vain.
Thanks in advance...




On Feb 2, 1:48 pm, "Luc Cool" <luc__c...@xxxxxxxxxxx> wrote:
Hi,

Did you install the driver on your platform?

What do you mean with "The device isnotdetectedif it is inserted while
booting?"
How do you know that it isnotdetected?

Is your problem that you can only use the device if you plug it in after
powerup, or can't you use it at all?

You say you will install the driver once the device is identified. You
should do things the other way around. You have to install the driver so
that the OS can identify theUSBdevice. Without driver, it will show you
the unidentifiedUSBdevice and allow you to manually tell it which driver
to use. If the driver is ok for theUSBdevice, the OS will create the
necessary registry keys, so that theusbdevice driver will load
automatically, the next time the device isdetected.

regards,

Luc

"mini" <m...@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message

news:D534DB02-722C-4535-8960-200B6BD4095F@xxxxxxxxxxxxxxxx



Thanks forthe reply.

If I insertUSBcable from GSM module after bootup, it gives the pop-up
from
that I understand that it identifies the device. The driver for GSM module
is
available in the form of .CAB file and once if it identifies, I'll install
it.

What I want is on power-up, if my module is inserted, it should identify
the
device.

How can I do for that?
Could you clarify do I include any uhci/ehci from catalogue items?

Already I included OHCI in my image.

Thanks very much in advance.

"vinoth" wrote:

Windows CE 5.0 doesn't have the GSM Module support. and Windows CE 6.0
having
the GSM Module Support (Cellcore) . i don't think it will support for
GSM
overUSBand it will support GSM over serial port.
--
vinoth.R
software Engineer

"mini" wrote:

I inserted the (GSM modem)USBdevice to one of the ports of myUSBHUB
which
is connected to host port 1 of pxa270 processor.
I also insertedUSBmouse, pen drive to this hub. These devices are
detected. But the GSM device isnotdetectedif theUSBcable is
plugged-in
while booting.

After bootup, once the image has comeup, if I plug-in the GSMUSB
device,
then the "UnidentifiedUSBdevice" pop-up has come.

Actually where is the problem? I couldnot get it?
Immediate help needed.....- Hide quoted text -

- Show quoted text -


.

Relevant Pages