Re: Aodio Volume copntrol in Control Panel


It has nothing to do with the CPL volume applet.
The upper layer s/w operates within the virtual
range of [0000h (silence) .. FFFFh (the highest)]
for each channel, it is up to the audio driver to
calculate and apply the absolute value.

You will need to tweak you audio driver to lower
the upper boundary. Do you have the driver sources?


Piyush wrote:
Dear All,

I have WinCE 5.0 ported on x86 platform. Unfortunately the device does not have that powerful speakers.
When the volume is increased to maximum from the control panel and the volume is increased to maximum in the media player then the voice starts cracking and sounds as if it is playing from a speaker with torn cone.

Is there any way to bring down the level of Maximum volume in the Control Panel.

I believe right now it can be upto FFFFFFFF. How can I limit to lesser Value?

Thanks and Advance


.

Relevant Pages

  • Re: Aodio Volume copntrol in Control Panel
    ... The upper layer s/w operates within the virtual ... You will need to tweak you audio driver to lower ... Piyush wrote: ... When the volume is increased to maximum from the control panel and the ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Increasing volume in Control panel crashes image
    ... Thanks Michel, i assumed the 0xffffffff was max volume which is what i set ... the sound to in Control panel .Of cource the moment i turn the sound right ... Anyway i will look into the audio driver. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Increasing volume in Control panel crashes image
    ... The restarting of the board may be caused by a watchdog reset. ... It could be caused by the audio driver waiting for some bit in the audio hw to flip, and doing that in a tight loop. ... WMP doesn't make much of a difference. ... So when i increase volume in control panel it crashed my image and restarts ...
    (microsoft.public.windowsce.platbuilder)