Based on the article from Microsoft Windows CE 5.0: "How to Add a CEPC
to an Ethernet Network"
It mentions that in step 2: "2. Create a boot floppy disk for the CEPC
and modify the Autoexec.bat file on the boot floppy disk to recognize
the Ethernet card."
What information should I add and modify for file Autoexec.bat?
Because when I load the nk.bin by ethernet, the screen shows "dumping
to 0x0013A388"....
Re: CEPC stuck at DHCP ... I tried removing USB-related items from the catalog, disable USB in the BIOS ... and switching to a RTL8139D-based PCI ethernet card.... > It gives problem for CEPC download.... (microsoft.public.windowsce.platbuilder)
Re: eboot failure!!! and image loading failed ... same .The board has realtek 8110SB as an integrated ethernet card.When i ... It is clear here that the ethernet card is getting detected,but it is not ... Also if i try to boot from the hard disk(i am using x86 bootloader),i ... I am able to load a cepc image... (microsoft.public.windowsce.platbuilder)
CE4.1 CEPC debugging ... I created an CEPE image, and could upload it via ethernet,... but I could not establish the connection between the CEPC and a PB. ... Are their any special configuration needed for enabling debug connection for ... (microsoft.public.windowsce.embedded)
Re: Arbor 612 Boot Message ... When you configure remote connection and choose ethernet, does the CEPC...download does not begin, try to restart your CEPC as suggested in MSDN. ... "msnews.microsoft.com" ha scritto nel messaggio... (microsoft.public.windowsce.platbuilder)
ActiveSync : connection settings ? ... How can I do to modify these settings to get activesync work through ethernet?... (microsoft.public.pocketpc.activesync)
