Re: Serial driver

I am developing BSP for MC9328MXL Litekit.
I have a problem in my serial driver. The debug messages are not being
displayed properly. I have followed i.mx21 code but still It is not
working properly. Whenever I reset, I just get only first debug
message, the rest are not displayed, but when I do single stepping
using MultiIce, It works but not perfectly. As anybody faced such a
problem.
Hard to say based on what you've posted so far. There are a lot of little
subtleties about the i.MXL serial UARTs and some differences from the
i.MX21. If you posted more details it might help, you also might want to
consider using EmbeddedFusion to help with your design. We have a small CPU
module that includes the i.MXL, FLASH, RAM and an OS image ready to run.
Contact me directly for more information.

--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com


.

Relevant Pages

  • How to test my serial driver
    ... I am bit new to device driver ... I hv a doubt that if i didn't include my serial driver while ... Even though i am getting debug messages. ... I don't know how i am getting without PDD serial driver. ...
    (microsoft.public.windowsce.embedded)
  • Serial driver
    ... I am developing BSP for MC9328MXL Litekit. ... I have a problem in my serial driver. ... The debug messages are not being ...
    (microsoft.public.windowsce.platbuilder)
  • Re: URGENT: dont know how to add FLASHDRV.DLL.
    ... (For the sake of it's debug messages it assumes the driver is named ... smaillet at EmbeddedFusion dot com ...
    (microsoft.public.windowsce.embedded)
  • Re: Win CE 5.0 PXA270 suspend resume - resume freeze--help
    ... Build a debug version of the OS and let the debug messages tell you where ... I'd recommend enabling most of the zones for the device manager ... smaillet at EmbeddedFusion dot com ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Driver loading problem
    ... I'm getting same set of debug messages which copied in previous mails. ... I cannot use KITL because of harware problem. ... I'm using Jtag debugger. ... > smaillet at EmbeddedFusion dot com ...
    (microsoft.public.windowsce.platbuilder)