Re: Windows CE 6.0 remote tools broken?
- From: "Yan Sun [MSFT]" <NoSpampls@xxxxxxxxxxxx>
- Date: Mon, 4 Dec 2006 12:35:22 -0800
Alex,
Sorry for the late reply!
For 3), It seems the device connection setting is not right. Can you clean
up "C:\Documents and Settings\Your Name\Local Settings\Application
Data\Microsoft\CoreCon\1.0"(make a copy at your local) and try to reset your
connection setting? Thats what I did before.
<alext@xxxxxxxxxxxxx> wrote in message
news:1164690004.940912.301090@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Yan,
I tried the following:
1) Copied files as in 1.. of your suggestion
2) Tried an image with 2.. of your suggestion for connection using CE 5
tools - still get the same error
3) Tried an image with 3.. of your suggestion using CE 6.0 tools - if I
use the TCP/Activesync connection combination as with the CE 5 device
template for example, I get a "Device not Ready" error. If I try use
the CE device template using KITL, I get an "unspecified error".
Are the files you have specified all the ones I need for connection
purposes. Anything else I should check in terms of connection settings?
Yan Sun [MSFT] wrote:
Alex,
It seems you have two version of CE (5.0, and 6.0) on your machine. It
could
cause mis-match on corecon connetion. Can you take a try on following
steps
to see if that works for you:
1.. Copy c:\Program Files\Common Files\Microsoft
Shared\corecon\1.0\Target\wce400\%_TGTCPU%\* to the release dir
2.. Copy c:\Program Files\Windows CE Platform
Builder\5.00\CORECON\TARGET\%_TGTCPU%\tlkitlc.dll to the release dir (Or,
in
CE6, c:\Program Files\Microsoft Platform
Builder\6.00\CORECON\TARGET\%_TGTCPU%\tlkitlc.dll)
3.. Boot the CEPC image inside PB
4.. Open a VS remote tool through Start Menu -> VS2005 -> Remote Tools
and
connect.
<alext@xxxxxxxxxxxxx> wrote in message
news:1164607235.794720.249170@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I'm having lots of problems trying to connect to a CE 6.0 device using
the remote tools like registry viewer. The device is connected via
Ethernet and debugging via Visual Studio 2005 works fine. I haven't
been able to resolve it, after doing/checking the following:
- made sure KITL enabled build setting is on and all the KITL settings
in the connectivity options are checked.
-Tried debug and release builds
- I am trying to use KITL Tranpsort as transport and CESH as startup
server - I get the error "Unable to load device side components. Please
check server configuration settings". These settings worked fine under
CE 5.0 platform builder (and still does).
- tried running both the CE 5.0 and CE 6.0 versions of the remote tools
directly by launching the .exe's without success.
- I have tried all other remote connection methods/combos
(KITL/CESH/MANUAL) without success.
What should I check I should have component-wise in my build to get
this working - as far as I can tell, my build has the same components
as my CE 5.0 version.
.
- Prev by Date: Re: Platform Builder for Windows Mobile 5.0 and Windows CE Platform Builder 5.0?
- Next by Date: Re: RELEASETYPE not set; __PROJROOT not found.
- Previous by thread: Re: Windows CE 6.0 remote tools broken?
- Next by thread: BUG: Solution Explorer does not understad "*" as DIRS file entry
- Index(es):
Relevant Pages
|
