Re: Windows CE 6.0 remote tools broken?

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi ALex,
1)are you trying to connect without activesync like it is described here http://msdn2.microsoft.com/en-us/library/ms228708(VS.80).aspx ?

2)are you unsing the files
-Clientshutdown.exe
-ConmanClient2.exe
-CMaccept.exe
-eDbgTL.dll
-TcpConnectionA.dll

found here
C:\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\armv4i (depends of hardware)

3) or are you unsing the files
-Clientshutdown.exe
-ConmanClient2.exe
-tlkitlc.dll

found here
D:\Program Files\Windows CE Platform Builder\5.00\CORECON\TARGET\ARMV4I (depends of hardware)

Regards
Javier

On Mon, 27 Nov 2006 12:20:27 +0100, <alext@xxxxxxxxxxxxx> wrote:

Thanks for your reply Naveen.

Unfortunately I am not using Activesync so the Device Emulator Manager
doesn't behave the same way :(

Naveen wrote:
Hi alext,

I am not sure whether this will work. but it worked fine for me...

Go to tools ... Click Device Emulator Manager.. Find out your device in
the list.. Connect to your device ( right click option).. IF device is
connected a green icon will be seen.. Now Right click and say cradle..
once this process finishes you will be able to see the remote reg
editor and use them.

Transport and start up server is both Microsoft Active Sync....

alext@xxxxxxxxxxxxx wrote:
> I'm having lots of problems trying to connect to a CE 6.0 device using
> the remote tools like registry viewer. The device is connected via
> Ethernet and debugging via Visual Studio 2005 works fine. I haven't
> been able to resolve it, after doing/checking the following:
>
> - made sure KITL enabled build setting is on and all the KITL settings
> in the connectivity options are checked.
>
> -Tried debug and release builds
>
> - I am trying to use KITL Tranpsort as transport and CESH as startup
> server - I get the error "Unable to load device side components. Please
> check server configuration settings". These settings worked fine under
> CE 5.0 platform builder (and still does).
>
> - tried running both the CE 5.0 and CE 6.0 versions of the remote tools
> directly by launching the .exe's without success.
>
> - I have tried all other remote connection methods/combos
> (KITL/CESH/MANUAL) without success.
>
> What should I check I should have component-wise in my build to get
> this working - as far as I can tell, my build has the same components
> as my CE 5.0 version.




--
Javier Grijalba
www.positivesystems.com
Touch Panel PC systems
JGrijalba at Positivesystems dot com
.

Relevant Pages

  • Re: ActiveSync 4.0 passthru interface selection
    ... The difference is how the Pocket PC accesses hosts. ... ActiveSync 4.x Troubleshooting Guide - ... by clicking on File - Connection Settings and make sure that This ... "Local Area Network" ...
    (microsoft.public.pocketpc.activesync)
  • Re: Activesync replacement?
    ... Look through the AS settings on the device, ... If you don't like the engine in your Honda, ... ActiveSync is configured to use it. ... Exchange, it doesn't force Exchange to magically appear on your network, ...
    (microsoft.public.pocketpc.activesync)
  • Re: Moto Q SBS Premium Active Sync Errors
    ... "the proxy server specified is incompatible with the device" Error Code ... This issue can be caused by an incorrect setting in ActiveSync. ... Choose Connection Settings from the File menu. ...
    (microsoft.public.windows.server.sbs)
  • Re: Debugging (VS2005) an app with threads above default priority
    ... VS2005 only uses CoreConn, so that shouldn't be a problem. ... that's what you're thinking of, was even easier to use over Ethernet only, ... And thanks for the suggestions re ditching ActiveSync - I'll have a look ... connectivity issues with this target board, so I've tended to push the ...
    (microsoft.public.windowsce.app.development)
  • Re: Debugging (VS2005) an app with threads above default priority
    ... And thanks for the suggestions re ditching ActiveSync - I'll have a look at the archives as you suggest. ... I think there are some vendor-implementation connectivity issues with this target board, so I've tended to push the problem back to them. ... There have previously been a number of threads on debugging with VS2005 and without ActiveSync. ... But I have some CommEvent handling threads I would like to try to run at a higher priority than the threads that "consume" the messages they handle. ...
    (microsoft.public.windowsce.app.development)