Re: using SD CARD as a USB Mass Storage Device in WINCE 5.0
- From: "Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 8 Nov 2006 13:07:25 -0500
Since nobody else answered, I will put my two cents in to get you going.
1. You left a lot to our imagination. We don't know anything about your
board, your CE version. I don't know what you mean by using your SD Card as
a USB Mass Storage device. That could be implmented several ways.
2. You have a PDD for what?
3. The client driver that you use would be the USB Mass Storage Class under
USB Host Support. That is assuming that your implementation has the SD Card
working as a true USB Mass Storage device.
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"Imtiaz" <Imtiaz@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:280FF33D-ACBC-4FA3-B125-E0C00A5B353D@xxxxxxxxxxxxxxxx
Hi All,
I am new to WINCE, I want to use my SD Card which is working as a USB Mass
Storage Device. I have following queries
(1) I have the PDD (driver), and have to use the MDD driver provided by
the
MS WINCE. is it correct, what should I do to include the PDD and MDD in my
BSP
(2) which client driver I have to use and what register settings I have
to
do to include in my BSP.
(3) to use USB as a mass storage device, what all components I should
include.
(4) to use SD Card as a USB Mass Storage device. What should I do.
It will be great help if somebody can help me in this or suggest me some
docs.
Regards,
Imtiaz
.
- Follow-Ups:
- Re: using SD CARD as a USB Mass Storage Device in WINCE 5.0
- From: Valter Minute
- Re: using SD CARD as a USB Mass Storage Device in WINCE 5.0
- Prev by Date: Re: cancel an IRP
- Next by Date: Re: How to customize the cross-hair of touch calibration UI
- Previous by thread: cancel an IRP
- Next by thread: Re: using SD CARD as a USB Mass Storage Device in WINCE 5.0
- Index(es):
Relevant Pages
|
