Re: Bad RX packet during BIN download


It is a question for Compulab, have you tried to contact
support? In the most cases problems like this means some
issues with the ethernet driver in your eboot, improper
h/w config (timings, dma, interrupts etc) or h/w itself.



Talbot wrote:
I am having difficulty downloading images from platform builder to a target. The image is only 10 MB but it fails roughly 75% of the time. The serial output from the target during download is:

Download BIN file information:E1016000 (Memory)5.255.255 -----------------------------------------------------CP() Sent == ProcessDHCP()::DHCP_INIT==
[0]: Base Address=0x220000 Length=0x167EF78 Got Response from

****** OEMVerifyMemory Checking Range [ 0x220000 ==> 0x189EF77 ] FindAllPCINetCard: Searching for PC
****** RAM Address ******

Bad RX packet [Header: 0xED ****** RAM Address ******ll to 0x0
Base Class, Subclass = 2, 0 => NETWORK_CTLR

Bad RX packet [Header: Interrupt = 10..00:01:C0:01:DF:F8 BaseAddress[0] = 0xF800 (I/O)

Once it does complete I am able to transfer files from the network with no signs of error. I have tried all differnet network cabling, and a different carrier board for my processor board.
I am using a Compulab CM-iGLX board based on AMD's Geode LXD800 CPU.

1) Has anyone else experienced this sort of problem?
2) Can anyone explain why this occurs during load but not during traditional networking operations?
3) Is there anything I can try at this point?

.