Re: Time and date getting reset every time
- From: "Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 19 Oct 2006 09:54:41 -0400
Right, could be a hardware problem.
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"<ctacke/>" <ctacke[@]opennetcf[dot]com> wrote in message
news:ee3YR4r8GHA.940@xxxxxxxxxxxxxxxxxxxxxxx
Or it may have an RTC, and it may be implemented right, but the
battery/power for it is dead or missing....
--
Chris Tacke
OpenNETCF Consulting
Managed Code in the Embedded World
www.opennetcf.com
--
"Bruce Eitman [eMVP]" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:uMvBFXr8GHA.3644@xxxxxxxxxxxxxxxxxxxxxxx
Or you might have an RTC but are either not using it in software or using
it incorrectly.
Assuming that you have an external RTC, the BSP is responsible for
setting the time in the external RTC and for reading the time from the
external RTC on boot and using the time.
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"Dean Ramsier" <ramsiernospam@xxxxxxxxxx> wrote in message
news:efvPZJr8GHA.4476@xxxxxxxxxxxxxxxxxxxxxxx
Depends on how your Real Time Clock is implemented in hardware. That is
the clock that provides this information. Or you might not even have an
RTC, and it is being created in software. In that case, same thing
applies. A reset means start over...
--
Dean Ramsier - eMVP
BSQUARE Corporation
"balaji" <balajir_tr@xxxxxxxxxxx> wrote in message
news:1161171258.084480.169330@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I am using MIPS development board.In my image the Time and Date getting
reset everytime i reset my device to 1st Jan 2003.do any one know how
to resolve it.
.
- References:
- Time and date getting reset every time
- From: balaji
- Re: Time and date getting reset every time
- From: Dean Ramsier
- Re: Time and date getting reset every time
- From: Bruce Eitman [eMVP]
- Re: Time and date getting reset every time
- From: <ctacke/>
- Time and date getting reset every time
- Prev by Date: Re: Try add some drivers, one is OK but others fail
- Next by Date: Re: MEMORY tag addressing question
- Previous by thread: Re: Time and date getting reset every time
- Next by thread: PC104/ISA bus addressing above 1 MB area
- Index(es):
Relevant Pages
|
