Stuck after downloading image; now what?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I have cloned the SMDK2410 BSP that comes in CE5 and got to it teh
point where I can download an image via ethernet to an LN2410SBC. The
image downloads, EBOOT jumps to the image and I get the following on PB
and via the serial port. After this it appears dead.

from PB:
The Kernel Debugger is waiting to connect with target.
0 PID:0 TID:0 Sp=ffffc7cc
19112 PID:dfdf002 TID:dfdf266 OEMIoControl: Unsupported Code 0x10100b4
- device 0x0101 func 45
19137 PID:4dfc7b62 TID:4dfc7b3e OEMIoControl:Unsupported Code 0x101008c
-device 0x0101 func35

from serial port:
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at
18:25:00
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable =
8000971c
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
KITL: *** Device Name SMDK24102651 ***
VBridge:: built on [Oct 10 2006] time [14:26:56]
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0xAC25E580] to [0xAC262580].
Rx buffer [0xAC2625A0] to [0xAC2665A0].
VBridge:: NK add MAC: [8-0-3E-26-A-5B]
KITL: Connected host IP: 192.169.0.2 Port: 1514
KITLGlobalState == 0x61
KITL: Leaving polling mode.

My problem: I'm really new to this and have very little idea what this
is telling me. I believe that (from reading the Production-Qaulity OAL
section on MSDN) that I have made it through OEMInit and the KITL has
been initialized. The target control options are greyed out in the
target menu so perhaps somethign has not started properly. I have not
found a good reference yet as to what order things are brought up in to
know where to start looking.

Any help greatly appreciated.

Thanks,

JEff

.

Relevant Pages

  • Re: Problem with KB890859 update...
    ... >following link, download this file, execute it, allow it to collect the logs, ... >> wants to install on every boot, but now it FAILS every time. ... >> WindowsUpdate with code Call complete and error 0 ...
    (microsoft.public.windowsupdate)
  • Re: Save Target As fails to save
    ... - Created a whole new policy and set it up the same as the 'failing' one. ... > Save Target As and Print Target Commands Are Unavailable ... Go to this site and read on adjusting the Privacy settings in ZA. ... > Value of Download Directory ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Unable to load rtl8139.dll
    ... First to VMINI/KITL issue - VMINI is virtual network adapter using KITL ... When you download image with enabled VMINI you have see it as network ... this will set on all debug zones on PCIBus driver. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Error Code: 80070005 - DM: SusMakeDirectoryW failed with 0x80070005.
    ... All updates prior to XP SP2 installed ... Skipping download. ... CClientCallRecorder::BeginFindUpdates from WindowsUpdate with call ...
    (microsoft.public.windowsupdate)
  • Re: More on 0xf0f1/0x8007f0f1/0x8024000c [...dload fails for v5 WU and
    ... installed with the latest hot fixes downloaded unsing Windows Update. ... Skipping download. ...
    (microsoft.public.windowsupdate)