microsoft.public.windowsce.platbuilder

• Thread Index

---

• RDP Won't accept keyboard input?
  • From: TMa
• Re: About createFile
  • From: Valter Minute
• Re: Howto start app directly when system start, and restart once it quit?
  • From: Anthony Pellerin
• Re: How the File system get my Flash size characteristics
  • From: Anthony Pellerin
• Re: Create GPIO Interrupt.
  • From: GB
• Re: !IF and !ENDIF in sources.cmn
  • From: voidcoder
• Can't see any other font than Arial
  • From: minimega
• Re: About createFile
  • From: Valter Minute
• Re: Create GPIO Interrupt.
  • From: Valter Minute
• Re: !IF and !ENDIF in sources.cmn
  • From: Doug Cook \(MS\)
• Create GPIO Interrupt.
  • From: GB
• Re: Debugger Hang
  • From: voidcoder
• Re: How to build DEVICE.EXE and print debug message in Debug configuration ?
  • From: checko
• Getting linking errors for DllCanUnloadNow and DllGetClassObject
  • From: zuber
• Re: Determing addresses used on ISA port
  • From: Ole
• Re: Dowloading from VS2005 to PB5
  • From: Henrik Viklund
• Dowloading from VS2005 to PB5
  • From: John
• Re: kernel startup is not being called
  • From: mahi
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: somraj
• Can we continually connect network with activesync
  • From: sjpark0013
• Re: Connectivity Options never opens
  • From: Tom Isaacson
• Re: Connectivity Options never opens
  • From: Tom Isaacson
• Howto start app directly when system start, and restart once it quit?
  • From: Kein
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: ryanox
• Re: Connectivity Options never opens
  • From: Doug Cook \(MS\)
• Capturing debug messages using CeLog on a release terminal
  • From: Josh
• Debugger Hang
  • From: kokozi
• Re: Execute a command during a process of Build (Build System with DIRS,SOURCES)
  • From: Bruce Eitman [eMVP]
• Re: Size limit with KLibAllocShareMem
  • From: voidcoder
• Re: SDMemory.dll
  • From: voidcoder
• Re: Some of my own drivers doesn't get loaded.. ?!!??
  • From: Michel Verhagen (eMVP)
• Some of my own drivers doesn't get loaded.. ?!!??
  • From: Thomas Johansen
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: voidcoder
• Re: MmMapIoSpace for applications in CE 6.0?
  • From: voidcoder
• Re: windows CE prevailing rate
  • From: derrickmason_2006
• Re: windows CE prevailing rate
  • From: Steve Maillet \(eMVP\)
• Re: windows CE prevailing rate
  • From: derrickmason_2006
• Re: windows CE prevailing rate
  • From: derrickmason_2006
• Re: windows CE prevailing rate
  • From: derrickmason_2006
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: Execute a command during a process of Build (Build System with DIRS,SOURCES)
  • From: Olivier M
• Re: Syntax for tftp.exe
  • From: Henrik Viklund
• Re: Windows CE onto Flash drive?
  • From: Paul G. Tobey [eMVP]
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Vadim Tokarskiy
• Re: Greek Language Localisation
  • From: Paul G. Tobey [eMVP]
• Re: Ethernet Download Hangs and Eboot Crashes.
  • From: Ulrich Eckhardt
• Size limit with KLibAllocShareMem
  • From: Ole
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: voidcoder
• Ethernet Download Hangs and Eboot Crashes.
  • From: Kumar
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: voidcoder
• Re: Syntax for tftp.exe
  • From: Valter Minute
• Re: Syntax for tftp.exe
  • From: Henrik Viklund
• SDMemory.dll
  • From: alatvk
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: MmMapIoSpace for applications in CE 6.0?
  • From: Steve Maillet \(eMVP\)
• Re: Warnings and Messages in Platform Builder 5.0
  • From: Gage 05
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: voidcoder
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Dean Ramsier
• Re: how to register my custom source filter in winCE 5.0 ?
  • From: voidcoder
• how to register my custom source filter in winCE 5.0 ?
  • From: zuber
• Re: Execute a command during a process of Build (Build System with DIRS,SOURCES)
  • From: Anthony Pellerin
• Execute a command during a process of Build (Build System with DIRS,SOURCES)
  • From: Olivier M
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: voidcoder
• Re: MmMapIoSpace for applications in CE 6.0?
  • From: voidcoder
• Re: Why does the OS CE4.2 boot so slowly, when large numbers of datas in the nandflash?
  • From: voidcoder
• Re: Why does the OS CE4.2 boot so slowly, when large numbers of datas in the nandflash?
  • From: lljj462
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: Anthony Pellerin
• Re: Intel PSM 3.7 - Corrupted file system
  • From: voidcoder
• question about bootpart / master boot record's location
  • From: ryanox
• Re: SCard Lib : Power Management Ready?
  • From: voidcoder
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: ryanox
• Re: Why does the OS CE4.2 boot so slowly, when large numbers of datas in the nandflash?
  • From: voidcoder
• Re: Warnings and Messages in Platform Builder 5.0
  • From: voidcoder
• windows CE prevailing rate
  • From: derrickmason_2006
• Re: Why does the wince4.2 ceplayer delay several seconds before playing wmv files?
  • From: lljj462
• Re: Why does the wince4.2 ceplayer delay several seconds before playing wmv files?
  • From: <ctacke/>
• Why does the wince4.2 ceplayer delay several seconds before playing wmv files?
  • From: lljj462
• Re: Bootloader modification???
  • From: Steve Maillet \(eMVP\)
• Why does the OS CE4.2 boot so slowly, when large numbers of datas in the nandflash?
  • From: lljj462
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: lljj462
• Re: Bootloader modification???
  • From: Steve Maillet \(eMVP\)
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: Bootloader modification???
  • From: Luc Cool
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Doug Cook \(MS\)
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Seehwan
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: Splash Screen bootloader
  • From: Bruce Eitman [eMVP]
• Re: kernel startup is not being called
  • From: Bruce Eitman [eMVP]
• Re: Russian Localisation
  • From: Jack
• Re: Russian Localisation
  • From: Jack
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Seehwan
• Re: bootme problem
  • From: ali88z@xxxxxxxxx
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Jason
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Paul G. Tobey [eMVP]
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Jason
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Jason
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Paul G. Tobey [eMVP]
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Jason
• Re: IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Paul G. Tobey [eMVP]
• IOCTL_NDIS_REBIND_ADAPTER and MultiCast
  • From: Jason
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Dean Ramsier
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Vadim Tokarskiy
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: fd
• Windows CE and Ethernet
  • From: Albert Taucher
• Re: Windows CE onto Flash drive?
  • From: Paul G. Tobey [eMVP]
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: Greek Language Localisation
  • From: Paul G. Tobey [eMVP]
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Paul G. Tobey [eMVP]
• Re: Hive Based Registry Problem
  • From: Gunnar Frenzel
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: fd
• Re: Russian Localisation
  • From: Jack
• How can I set POOM databases to persistent storage and use them from there ?
  • From: Florin
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Steve Maillet \(eMVP\)
• Re: SCard Lib : Power Management Ready?
  • From: Keaven Pineau
• SCard Lib : Power Management Ready?
  • From: Keaven Pineau
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: somraj
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: Dean Ramsier
• Re: Building an image for CE 5.0 using CE 4.2
  • From: Dean Ramsier
• Re: How wavedev's DMA operation works?
  • From: Dean Ramsier
• Re: Russian Localisation
  • From: JoeB
• Re: AT91SAM9261-EK CETK Results set for this BSP
  • From: JoeB
• Re: NDIS, interrupts, and headaches...
  • From: Emmanuel.Viollet@xxxxxxxxxx
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: fd
• Re: AT91SAM9261-EK - an immage booting problem
  • From: Anthony Pellerin
• Re: AT91SAM9261-EK CETK Results set for this BSP
  • From: Anthony Pellerin
• What kind of Cryptographic Provider fit DRM's license??
  • From: bravesheng
• AT91SAM9261-EK CETK Results set for this BSP
  • From: JoeB
• Re: bootme problem
  • From: Marco Contenti
• Re: Hive Based Registry Problem
  • From: Andrew at Plextek
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: ryanox
• Re: Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: seehwan.yoo@xxxxxxxxx
• how to synchronization time through ActiveSync ?
  • From: pc . xiaoxin
• Hive Based Registry Problem
  • From: Gunnar Frenzel
• Re: Downloading nk.bin to Target device without PB?
  • From: Henrik Viklund
• Re: Downloading nk.bin to Target device without PB?
  • From: Anthony Pellerin
• Re: Nk.bin download
  • From: Jack
• Greek Language Localisation
  • From: Ravi
• Allocating and accessing physically contiguous memory in user mode in WinCE 6.0 Beta
  • From: somraj
• Re: Downloading nk.bin to Target device without PB?
  • From: Henrik Viklund
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: ryanox
• Re: bootme problem
  • From: ali88z@xxxxxxxxx
• Re: Splash Screen bootloader
  • From: anand
• Re: I am trying to replace "ndisuio.dll" retail version with the debug version.
  • From: Michabs
• Re: Building an image for CE 5.0 using CE 4.2
  • From: Steve Maillet \(eMVP\)
• Building an image for CE 5.0 using CE 4.2
  • From: Greg White
• Re: bootme problem
  • From: ali88z@xxxxxxxxx
• Re: How wavedev's DMA operation works?
  • From: Steve Maillet \(eMVP\)
• Re: How wavedev's DMA operation works?
  • From: Abel_Know
• Re: How to disable debug messages from Notify.dll?
  • From: John Spaith [MS]
• Re: Missing urlmon.lib
  • From: Bruce Eitman [eMVP]
• Re: bootme problem
  • From: Henrik Viklund
• Software based input panel driver
  • From: Ken Beauchesne
• Re: Connectivity Options never opens
  • From: Craig
• Re: Connectivity Options never opens
  • From: Amjad Hussain \(MS\)
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Barry Bond [MS]
• Re: bootme problem
  • From: ali88z@xxxxxxxxx
• bootme problem
  • From: ali88z@xxxxxxxxx
• Re: I am trying to replace "ndisuio.dll" retail version with the debug version.
  • From: Michabs
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Vadim Tokarskiy
• Re: Memory slider
  • From: Bruce Eitman [eMVP]
• Re: update OS on custom device
  • From: Steve Maillet \(eMVP\)
• Re: Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Steve Maillet \(eMVP\)
• Re: Splash Screen bootloader
  • From: Steve Maillet \(eMVP\)
• Re: NDIS, interrupts, and headaches...
  • From: Steve Maillet \(eMVP\)
• Re: Connectivity Options never opens
  • From: Craig
• Problem Running ARMV4I-based emulator from platform builerder after ce 6.0 rtm install
  • From: Vadim Tokarskiy
• Re: Memory slider
  • From: <ctacke/>
• Re: Memory slider
  • From: Mhaxx
• Wince500 Cloning warnings
  • From: TMa
• Re: How wavedev's DMA operation works?
  • From: Dean Ramsier
• Re: Incremental platform builds
  • From: Bruce Eitman [eMVP]
• Re: *.dat files in build process
  • From: Bruce Eitman [eMVP]
• Re: Memory slider
  • From: Bruce Eitman [eMVP]
• Re: Wince 6.0 Does not run for ARM Device Emulator
  • From: Barry Bond [MS]
• Re: How wavedev's DMA operation works?
  • From: Abel_Know
• Wince 6.0 Does not run for ARM Device Emulator
  • From: Rishabh Kumar Goel
• Memory slider
  • From: Mhaxx
• Re: I2C and receiving data from slave devices
  • From: Valter Minute
• Wince 6.0 Does not run for ARM Device Emulator
  • From: Rishabh Kumar Goel
• Re: I2C and receiving data from slave devices
  • From: Gromit
• Re: I2C and receiving data from slave devices
  • From: Valter Minute
• Re: *.dat files in build process
  • From: voidcoder
• Re: I2C and receiving data from slave devices
  • From: Anthony Pellerin
• Re: How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: Anthony Pellerin
• Re: update OS on custom device
  • From: Gromit
• I2C and receiving data from slave devices
  • From: Gromit
• Re: *.dat files in build process
  • From: Jack
• Re: boot.bib
  • From: K. S. Huang
• Re: Connectivity Options never opens
  • From: Amjad Hussain \(MS\)
• How to auto mount a PART_DOS32 patition in WinCE4.2 with 2k byte/page nandflash?
  • From: lljj462
• Bad (slow) performance on SOAP/TCPIP call
  • From: Werner
• Re: Bad RX packet during BIN download
  • From: voidcoder
• Re: *.dat files in build process
  • From: voidcoder
• Re: I am trying to replace "ndisuio.dll" retail version with the debug version.
  • From: Bruce Eitman [eMVP]
• Re: Incremental platform builds
  • From: Yannick BALERE
• Incremental platform builds
  • From: Pretissimo2002
• Re: Connectivity Options never opens
  • From: Craig
• I am trying to replace "ndisuio.dll" retail version with the debug version.
  • From: Michabs
• I am trying to replace "ndisuio.dll" retail version with the debug version.
  • From: Michabs
• Re: about IE6.0 vs MFC
  • From: Dean Ramsier
• Re: boot.bib
  • From: Dean Ramsier
• Re: SCardGetStatusChange Problem
  • From: Keaven Pineau
• Re: MP3 streaming problems
  • From: TechNick
• Re: update OS on custom device
  • From: Anthony Pellerin
• Re: *.dat files in build process
  • From: voidcoder
• Re: *.dat files in build process
  • From: Jack
• Re: Connectivity Options never opens
  • From: Amjad Hussain \(MS\)
• Re: GPS module
  • From: ratharn
• about DHCP
  • From: Cheng Shi
• Re: Bluetooth cips
  • From: vlick
• Re: Can't find import NdisQueryPacket in ndis.dll
  • From: desirechange via PocketPCJunkies.com
• Re: Splash Screen bootloader
  • From: Valter Minute
• Re: PXA270 USB Host Controller WINCE 4.1
  • From: Valter Minute
• Re: With irDA support WinCE 5.0 boots slower...
  • From: Valter Minute
• Re: NDIS, interrupts, and headaches...
  • From: Emmanuel.Viollet@xxxxxxxxxx
• Re: Splash Screen bootloader
  • From: Nicolas BESSON (eMVP)
• Splash Screen bootloader
  • From: anand
• Re: bootloader source files
  • From: Nicolas BESSON (eMVP)
• about IE6.0 vs MFC
  • From: Cheng Shi
• Re: bootloader source files
  • From: Steve Maillet \(eMVP\)
• Re: PXA270 USB Host Controller WINCE 4.1
  • From: HimaNshu
• Re: large page nand problem.
  • From: Randal Leeson
• Re: What data and how to set it in the ARGS session that described in eboot.bib
  • From: Travis Hobrla [MS]
• Re: UCB1400 driver
  • From: Dean Ramsier
• Re: Connectivity Options never opens
  • From: Craig
• With irDA support WinCE 5.0 boots slower...
  • From: Thomas Johansen
• Re: UCB1400 driver
  • From: Javier Grijalba
• Re: SendMessageTimeout not included in coredll.dll
  • From: RFOG
• Bluetooth cips
  • From: Sergeant
• Re: *.dat files in build process
  • From: AJM42
• Re: *.dat files in build process
  • From: AJM42
• Bluetooth dongle
  • From: Sergeant
• *.dat files in build process
  • From: Jack
• Re: NDIS, interrupts, and headaches...
  • From: Steve Maillet \(eMVP\)
• Re: about ddraw sample application
  • From: Niels Brouwers
• Re: NDIS, interrupts, and headaches...
  • From: Valter Minute
• NDIS, interrupts, and headaches...
  • From: Emmanuel.Viollet@xxxxxxxxxx
• SendMessageTimeout not included in coredll.dll
  • From: RFOG
• Re: AT91SAM9261-EK - an immage booting problem
  • From: Anthony Pellerin
• How to build tktest.exe
  • From: charlesrltk
• Re: STANDARD UART on PXA27X
  • From: Valter Minute
• STANDARD UART on PXA27X
  • From: Rudy Barbieri
• Re: Missing urlmon.lib
  • From: Mhaxx
• Re: AT91SAM9261-EK - an immage booting problem
  • From: JoeB
• UCB1400 driver
  • From: chanemouganandam
• Re: AT91SAM9261-EK - an immage booting problem
  • From: Anthony Pellerin
• Re: USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:)
  • From: Henrik Viklund
• Re: BIOS Boot loader rebuilt problem
  • From: Valter Minute
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Can't find import NdisQueryPacket in ndis.dll
  • From: desirechange via PocketPCJunkies.com
• ROMOFFSET in Eboot.bib
  • From: Rishabh Kumar Goel
• Re: unable to run managed code in CE 6 beta
  • From: Nate W
• Re: USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:)
  • From: MikeHan
• usb mass storage not works if our own sd driver used
  • From: Robert Lo
• What data and how to set it in the ARGS session that described in eboot.bib
  • From: ali88z@xxxxxxxxx
• Re: USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:)
  • From: Dunk
• Re: Restart during the download of the Runtime-Image, Hard Disk boot
  • From: Travis Hobrla [MS]
• Re: USB-Wifi adapter causes serial port problem, please HELP!!!
  • From: SergeiR
• Re: USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:)
  • From: Henrik Viklund
• Re: Mouse problem.
  • From: Paul G. Tobey [eMVP]
• USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:)
  • From: jmd80ta
• Re: Is there any emulator for CE6?
  • From: Paul G. Tobey [eMVP]
• Re: Web Browser Control and Hotkeys
  • From: Paul G. Tobey [eMVP]
• Re: Missing urlmon.lib
  • From: Helge Kruse
• Re: Does the 4.2 .net support VC-1 advanced profile?
  • From: Damon Barry [MSFT]
• Re: What is the Standard SDK used for?
  • From: JoeB
• external USB audio card for WinCE 5.0
  • From: Javier Grijalba
• Re: Determing addresses used on ISA port
  • From: R. de Gravelaine
• Re: toggle a pin
  • From: Steve Maillet \(eMVP\)
• Re: What is the Standard SDK used for?
  • From: Steve Maillet \(eMVP\)
• Re: Break point in a driver
  • From: Steve Maillet \(eMVP\)
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: BIOS Boot loader rebuilt problem
  • From: Valter Minute
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Determing addresses used on ISA port
  • From: Ole
• Re: BIOS Boot loader rebuilt problem
  • From: Valter Minute
• Missing urlmon.lib
  • From: Mhaxx
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: <ctacke/>
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: Rebecca Reed
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: <ctacke/>
• Re: How to enable debug output for eboot.nb0?
  • From: RFOG
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: Rebecca Reed
• Re: What is the Standard SDK used for?
  • From: Henrik Viklund
• Re: How to enable debug output for eboot.nb0?
  • From: Bruce Eitman [eMVP]
• Re: finding a file in wince image
  • From: Bruce Eitman [eMVP]
• Re: BIOS Boot loader rebuilt problem
  • From: Remi de Gravelaine
• Re: finding a file in wince image
  • From: Jack
• Re: What is the Standard SDK used for?
  • From: JoeB
• Re: What is the Standard SDK used for?
  • From: Dean Ramsier
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: AT91SAM9261-EK - an immage booting problem
  • From: Microtech
• Re: What is the Standard SDK used for?
  • From: JoeB
• Re: AT91SAM9261-EK - an immage booting problem
  • From: Anthony Pellerin
• Re: What is the Standard SDK used for?
  • From: Valter Minute
• Re: finding a file in wince image
  • From: Anthony Pellerin
• Re: When will platform.reg be updated in flat release directory
  • From: Valter Minute
• AT91SAM9261-EK - an immage booting problem
  • From: Microtech
• Re: DOS bootloader Vs. BiosBootLoader
  • From: Valter Minute
• Re: WinCE USB devices not recognised on startup
  • From: Valter Minute
• Re: What is the Standard SDK used for?
  • From: JoeB
• Re: BIOS Boot loader rebuilt problem
  • From: Valter Minute
• How to enable debug output for eboot.nb0?
  • From: RFOG
• Re: Components i need for a remote controlled device
  • From: Valter Minute
• Re: Au1200 RealTime Clock
  • From: K. S. Huang
• Re: What is the Standard SDK used for?
  • From: Henrik Viklund
• Re: What is the Standard SDK used for?
  • From: Valter Minute
• What is the Standard SDK used for?
  • From: JoeB
• How to disable debug messages from Notify.dll?
  • From: Ole
• Re: Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Doug Cook \(MS\)
• Re: toggle a pin
  • From: Valter Minute
• Re: Au1200 RealTime Clock
  • From: Mams
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: Connectivity Options never opens
  • From: Nicolas BESSON (eMVP)
• Re: BIOS Boot loader rebuilt problem
  • From: Marco Contenti
• Re: Connectivity Options never opens
  • From: Javier
• Re: Au1200 RealTime Clock
  • From: K. S. Huang
• Re: BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: Loading NK.bin from CF
  • From: Nicolas BESSON (eMVP)
• Au1200 RealTime Clock
  • From: Mams
• Re: Break point in a driver
  • From: Ole
• Re: Is there any emulator for CE6?
  • From: pinery via PocketPCJunkies.com
• how to make EDB9315A_WINCE500 debug platform
  • From: Cheng Shi
• Re: Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Singer
• Re: Stuck after downloading image; now what?
  • From: Jeff_Birt
• Re: Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Steve Maillet \(eMVP\)
• Re: Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Singer
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: Bruce Eitman [eMVP]
• GWES crash when Raster font support is removed....
  • From: Thomas Johansen
• Re: toggle a pin
  • From: Steve Maillet \(eMVP\)
• Re: Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Doug Cook \(MS\)
• Re: Break point in a driver
  • From: Steve Maillet \(eMVP\)
• Re: toggle a pin
  • From: Luc Cool
• Re: Break point in a driver
  • From: Ole
• Device Emulator for ARM?
  • From: B.R.Liao
• Re: Break point in a driver
  • From: Steve Maillet \(eMVP\)
• Break point in a driver
  • From: Ole
• Re: NK.BIN first call after launch..?
  • From: checko
• Re: BIOS Boot loader rebuilt problem
  • From: Luc Cool
• Re: toggle a pin
  • From: Mario
• Follow up on Platform Builder with Mac Pro and Bootcamp/XP
  • From: Mark Moeller
• Re: Connectivity Options never opens
  • From: Mo
• Re: DOS bootloader Vs. BiosBootLoader
  • From: Samuel Phung \(eMVP\)
• Re: Serial communication: are there difference between WinXX and WinCE?
  • From: Paul G. Tobey [eMVP]
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: Rebecca Reed
• RE: Hard drive does not init
  • From: Itamar
• Re: Serial communication: are there difference between WinXX and WinCE?
  • From: Diego Vitali
• Re: Dependency problem - Remove ... SYSGEN_AS_FILE
  • From: Bruce Eitman [eMVP]
• Re: toggle a pin
  • From: Luc Cool
• Re: RDP audio play back issue
  • From: John Chen
• Re: CETK serial comm test?
  • From: Sean Bowles [MS]
• Re: Build SDK from console built platform
  • From: Steve Maillet \(eMVP\)
• Re: Disable ActiveSync
  • From: Rebecca Reed
• Re: Restart during the download of the Runtime-Image, Hard Disk boot
  • From: aplamon
• Re: Disable ActiveSync
  • From: Bruce Eitman [eMVP]
• Re: toggle a pin
  • From: Paul G. Tobey [eMVP]
• Re: Web Browser Control and Hotkeys
  • From: Paul G. Tobey [eMVP]
• Re: Can't build from IDE, but can from shell in v5.00
  • From: <ctacke/>
• Re: Serial communication: are there difference between WinXX and WinCE?
  • From: Paul G. Tobey [eMVP]
• Re: Loading NK.bin from CF
  • From: Paul G. Tobey [eMVP]
• Re: RDP audio play back issue
  • From: SergeiR
• Re: Unidentified USB Device on hub
  • From: aplamon
• Re: DOS bootloader Vs. BiosBootLoader
  • From: Steve Maillet \(eMVP\)
• Re: Can't build from IDE, but can from shell in v5.00
  • From: Steve Maillet \(eMVP\)
• Re: Is there any emulator for CE6?
  • From: Steve Maillet \(eMVP\)
• BIOS Boot loader rebuilt problem
  • From: Roberto
• Re: hive-based registry
  • From: David
• Re: Components i need for a remote controlled device
  • From: Rudy Barbieri
• Re: toggle a pin
  • From: Mario
• Re: Serial communication: are there difference between WinXX and WinCE?
  • From: bbassett
• Re: Components i need for a remote controlled device
  • From: <ctacke/>
• Components i need for a remote controlled device
  • From: Rudy Barbieri
• Serial communication: are there difference between WinXX and WinCE?
  • From: Diego Vitali
• How to build DEVICE.EXE and print debug message in Debug configuration ?
  • From: charlesrltk
• Re: When will platform.reg be updated in flat release directory
  • From: Henrik Viklund
• Re: When will platform.reg be updated in flat release directory
  • From: Henrik Viklund
• Another problem about "SOURCELIBS" and "TARGETLIBS"
  • From: Singer
• Re: How to get usbd.lib
  • From: Henrik Viklund
• Re: A question about setting up a build environment.
  • From: Singer
• Re: toggle a pin
  • From: Luc Cool
• Re: When will platform.reg be updated in flat release directory
  • From: Singer
• WinCE USB devices not recognised on startup
  • From: Mr. Anthrope
• Re: How transplantthe 4.2BSP to 5.0
  • From: Anthony Pellerin
• Re: how to solve the problem"Failed to initialize from CECONFIG.H"
  • From: Mr.f
• how to solve the problem"Failed to initialize from CECONFIG.H"
  • From: desirechange via PocketPCJunkies.com
• Re: When will platform.reg be updated in flat release directory
  • From: Henrik Viklund
• Re: When will platform.reg be updated in flat release directory
  • From: Singer
• Re: Unidentified USB Device on hub
  • From: Henrik Viklund
• Re: RDP audio play back issue
  • From: John Chen
• Re: When will platform.reg be updated in flat release directory
  • From: Henrik Viklund
• Loading NK.bin from CF
  • From: Malcolm Reid
• Re: When will platform.reg be updated in flat release directory
  • From: Rudy Barbieri
• How transplantthe 4.2BSP to 5.0
  • From: desirechange
• DOS bootloader Vs. BiosBootLoader
  • From: Igor80
• Re: Unidentified USB Device on hub
  • From: Luc Cool
• about wince IME
  • From: MerryWu
• Re: Can't build from IDE, but can from shell in v5.00
  • From: <ctacke/>
• When will platform.reg be updated in flat release directory
  • From: Singer
• Re: Question about different ways of calling a driver
  • From: eg_yskaa
• How to get usbd.lib
  • From: blues_capture
• Re: RDP audio play back issue
  • From: SergeiR
• Unidentified USB Device on hub
  • From: aplamon
• Re: Need to simulate the up or down arrow being held
  • From: Paul G. Tobey [eMVP]
• Re: Can't build from IDE, but can from shell in v5.00
  • From: Steve Maillet \(eMVP\)
• Re: Need to simulate the up or down arrow being held
  • From: Jim
• Re: Can't build from IDE, but can from shell in v5.00
  • From: Steve Maillet \(eMVP\)
• Re: Need to simulate the up or down arrow being held
  • From: Paul G. Tobey [eMVP]
• Re: Need to simulate the up or down arrow being held
  • From: Jim
• Re: toggle a pin
  • From: Paul G. Tobey [eMVP]
• Re: Need to simulate the up or down arrow being held
  • From: Paul G. Tobey [eMVP]
• Re: Can't build from IDE, but can from shell in v5.00
  • From: Steve Maillet \(eMVP\)
• Need to simulate the up or down arrow being held
  • From: Jim
• Re: Disable ActiveSync
  • From: Bruce Eitman [eMVP]
• toggle a pin
  • From: Mario
• Re: Web Browser Control and Hotkeys
  • From: Paul G. Tobey [eMVP]
• Re: Help on VOIP
  • From: Haitao
• Anyone get WinCE 5.0 rinning on this board?
  • From: Tomppa
• Re: SrcCheck.exe
  • From: Emmanuel.Viollet@xxxxxxxxxx
• Disable ActiveSync
  • From: dario
• Re: MEMORY tag addressing question
  • From: Steve Maillet \(eMVP\)
• Re: Time and date getting reset every time
  • From: Bruce Eitman [eMVP]
• Re: Try add some drivers, one is OK but others fail
  • From: Bruce Eitman [eMVP]
• Re: MEMORY tag addressing question
  • From: Dean Ramsier
• MEMORY tag addressing question
  • From: jmd80ta
• Re: PXA27X KITL using Serial PORT
  • From: Rudy Barbieri
• PXA27x USB Client ActiveSync Problem
  • From: xinshine
• Re: PXA27X KITL using Serial PORT
  • From: Valter Minute
• Re: Question about different ways of calling a driver
  • From: Valter Minute
• PXA27X KITL using Serial PORT
  • From: Rudy Barbieri
• Re: Question about different ways of calling a driver
  • From: eg_yskaa
• Difficult problem: sometimes my board hangs on
  • From: Igor80
• Restart during the download of the Runtime-Image, Hard Disk boot
  • From: NCS
• Re: Question about different ways of calling a driver
  • From: Valter Minute
• Re: SrcCheck.exe
  • From: Doug Cook \(MS\)
• Re: Try add some drivers, one is OK but others fail
  • From: voidcoder
• Re: Run-time immage will not start after downloading
  • From: voidcoder
• Re: Problem in developing SD card driver for PXA255
  • From: voidcoder
• Re: How to compile _MoveFromCoprocessor?
  • From: Javier
• Re: Web Browser Control and Hotkeys
  • From: Sahul
• Problem in developing SD card driver for PXA255
  • From: vinod alat
• Re: Building Custom Startui
  • From: Steve Maillet \(eMVP\)
• Hold after downloading image! why?
  • From: wooya510
• Try add some drivers, one is OK but others fail
  • From: Kein
• About Eboot's USB Rndis problem
  • From: LDW
• Re: Question about different ways of calling a driver
  • From: eg_yskaa
• Re: About the Full-Kernel-Mode
  • From: Ross Jordan [MSFT]
• Re: Workspace backups
  • From: Steve Maillet \(eMVP\)
• Re: Value written from IST is not updated in the ISR
  • From: Steve Maillet \(eMVP\)
• Re: Kitl and USB
  • From: Henrik Viklund
• Re: Altering thread priorities
  • From: Paul G. Tobey [eMVP]
• Re: No receive on multicast group membership on Windows CE 4.2
  • From: Paul G. Tobey [eMVP]
• Re: Web Browser Control and Hotkeys
  • From: Paul G. Tobey [eMVP]
• Re: SDHC driver
  • From: Henrik Viklund
• Debugchk
  • From: TMa
• Re: Building Custom Startui
  • From: Steve Maillet \(eMVP\)
• Re: Kitl and USB
  • From: Steve Maillet \(eMVP\)
• Re: How to compile _MoveFromCoprocessor?
  • From: Steve Maillet \(eMVP\)
• Re: Value written from IST is not updated in the ISR
  • From: Steve Maillet \(eMVP\)
• Re: Question about different ways of calling a driver
  • From: Dean Ramsier
• Re: Workspace backups
  • From: Andrew at Plextek
• Re: SDHC driver
  • From: seshucherukuri
• No receive on multicast group membership on Windows CE 4.2
  • From: Mike Meier
• Re: Time and date getting reset every time
  • From: <ctacke/>
• Re: Question about different ways of calling a driver
  • From: Valter Minute
• Re: Copy NK.bin from SD Card to Flash
  • From: Valter Minute
• Question about different ways of calling a driver
  • From: eg_yskaa
• Re: Time and date getting reset every time
  • From: Bruce Eitman [eMVP]
• Re: How to conditionally assemble sourcecode?
  • From: Bruce Eitman [eMVP]
• Re: Time and date getting reset every time
  • From: Dean Ramsier
• PC104/ISA bus addressing above 1 MB area
  • From: Geert Petersen
• Time and date getting reset every time
  • From: balaji
• Re: Mouse cursor invisible
  • From: balaji
• How to compile _MoveFromCoprocessor?
  • From: Javier
• Re: Mouse cursor invisible
  • From: voidcoder
• Re: Mouse cursor invisible
  • From: balaji
• SrcCheck.exe
  • From: Emmanuel.Viollet@xxxxxxxxxx
• Re: Mouse cursor invisible
  • From: voidcoder
• Re: Mouse cursor invisible
  • From: balaji
• Re: Mouse cursor invisible
  • From: voidcoder
• Re: Mouse cursor invisible
  • From: balaji
• Kernel Debugger can't connect to the target
  • From: dotft
• Re: where can find s3c2440 bsp for wince5.0
  • From: None
• Re: Mouse cursor invisible
  • From: voidcoder
• Mouse cursor invisible
  • From: balaji
• Re: CE 5.0 Drivers
  • From: Steve Maillet \(eMVP\)
• Re: Breakpoint can't break
  • From: Singer
• Breakpoint can't break
  • From: Singer
• where can find s3c2440 bsp for wince5.0
  • From: paopaoer
• RDP audio play back issue
  • From: John Chen
• Re: Platform Builder Install On Vista
  • From: Bill T
• Re: Value written from IST is not updated in the ISR
  • From: Steve Maillet \(eMVP\)
• Re: Value written from IST is not updated in the ISR
  • From: Bel
• Re: WinCE USB: Power over USB
  • From: Albert Taucher
• Re: USB Driver Load Problem
  • From: dotft
• Re: CONFIG.BIB : the NK.BIN's size
  • From: Dean Ramsier
• Re: Value written from IST is not updated in the ISR
  • From: Dean Ramsier
• CONFIG.BIB : the NK.BIN's size
  • From: charlesrltk
• Re: French keyboard
  • From: Luc Cool
• Re: More Help required ARM PXA255, PB5.0 Kernel startup
  • From: grolo
• Re: USB Driver Load Problem
  • From: Valter Minute
• Value written from IST is not updated in the ISR
  • From: milton
• Re: USB Driver Load Problem
  • From: dotft
• Re: Audio Driver gets unloaded with error code 87
  • From: voidcoder
• Re: USB Driver Load Problem
  • From: Valter Minute
• Re: looking for etx AMD geode lx800 board
  • From: Niels Brouwers
• Re: MUI and Hive Registry
  • From: voidcoder
• USB Driver Load Problem
  • From: glinus
• TFAT - Atomic block ops on ATAPI PCI/IDE Storage Block Driver
  • From: lidas
• Re: How to conditionally assemble sourcecode?
  • From: ali88z@xxxxxxxxx
• Audio Driver gets unloaded with error code 87
  • From: avanibbhatt
• Re: Does HANDLE contain information like file pointer?
  • From: eg_yskaa
• Re: how to format nandflash into tow partition
  • From: eg_yskaa
• Smartfone Image Emulator Cradle?
  • From: Mo
• Re: Where is the Export Wizard in Windows Embedded CE 6.0
  • From: Steve Maillet \(eMVP\)
• Re: How to conditionally assemble sourcecode?
  • From: Bruce Eitman [eMVP]
• How to conditionally assemble sourcecode?
  • From: ali88z@xxxxxxxxx
• Re: USB mass storage
  • From: Henrik Viklund
• Re: SDHC driver
  • From: Henrik Viklund
• Re: serial port parity problem
  • From: Valter Minute
• Re: Does HANDLE contain information like file pointer?
  • From: Steve Maillet \(eMVP\)
• Re: Where is the Export Wizard in Windows Embedded CE 6.0
  • From: Brian
• Re: Platform Builder for Windows Embedded CE 5.0 can not install on windows 2003 SE.
  • From: Bruce Eitman [eMVP]
• Re: Is data section of Rom-based DLL resvered for every process SLOT?
  • From: Dean Ramsier
• Re: Does HANDLE contain information like file pointer?
  • From: Dean Ramsier
• Re: SDHC driver
  • From: seshucherukuri
• Re: SDHC driver
  • From: Henrik Viklund
• Re: Ohci reset in CPU sleep
  • From: sand
• USB Function Mass storage client problem
  • From: 阿隆西
• Re: serial port parity problem
  • From: Valter Minute
• SDHC driver
  • From: seshucherukuri
• UPDATE on When will MS fix the WinCE USB Mass Storage Problems?
  • From: Ken Hill
• Re: looking for etx AMD geode lx800 board
  • From: Albert Taucher
• Does HANDLE contain information like file pointer?
  • From: eg_yskaa
• Re: USB mass storage
  • From: Mhaxx
• Re: USB mass storage
  • From: Henrik Viklund
• Re: USB mass storage
  • From: Valter Minute
• Re: USB mass storage
  • From: Henrik Viklund
• Re: USB mass storage
  • From: Mhaxx
• Re: About the Full-Kernel-Mode
  • From: voidcoder
• Re: share dma interrupt
  • From: Valter Minute
• Re: How to close "warning treated as errors" in pb5
  • From: Tarun
• Re: MUI and Hive Registry
  • From: voidcoder
• Re: Kitl and USB
  • From: Henrik Viklund
• About the Full-Kernel-Mode
  • From: B.R.Liao
• Re: Platform Builder for Windows Embedded CE 5.0 can not install on windows 2003 SE.
  • From: Luis Koo
• Re: share dma interrupt
  • From: starry night
• Re: Keypad mapping
  • From: Mr.f
• Re: Where is the Export Wizard in Windows Embedded CE 6.0
  • From: Steve Maillet \(eMVP\)
• Re: Where does NK.EXE reside in on earth?
  • From: Steve Maillet \(eMVP\)
• Where is the Export Wizard in Windows Embedded CE 6.0
  • From: Brian
• PPP notification
  • From: Massimo
• Keypad mapping
  • From: sudheer
• CETK serial comm test?
  • From: skindiver
• Re: Platform Builder for Windows Embedded CE 5.0 can not install on windows 2003 SE.
  • From: Erwin Zwart
• Platform Builder for Windows Embedded CE 5.0 can not install on windows 2003 SE.
  • From: Luis Koo
• Re: LEAP
  • From: Jeff Kelley
• Re: Sd card detect
  • From: Ratheesh Rajan [MSFT]
• Candidate Window does not appear
  • From: Jim King
• Re: missing serial ports in CE.NET 4.10
  • From: Paul G. Tobey [eMVP]
• Re: BuildAndSysgen Process Hanging
  • From: Henrik Viklund
• Re: BuildAndSysgen Process Hanging
  • From: kumar2mukesh
• looking for etx AMD geode lx800 board
  • From: Niels Brouwers
• Re: wince booting slow
  • From: Bruce Eitman [eMVP]
• Re: A question a bout hive-based registry
  • From: Bruce Eitman [eMVP]
• Re: Ohci reset in CPU sleep
  • From: K. S. Huang
• Re: missing unimodem.dll from CE.NET 4.10
  • From: voidcoder
• Re: Can CETK be run without KITL installed?
  • From: Anthony Pellerin
• Re: Kitl and USB
  • From: Anthony Pellerin
• Re: Problem about XIP bootup
  • From: eg_yskaa
• Re: Copy ohcd.def from common to workspace folder
  • From: Michael Reim
• Re: Can CETK be run without KITL installed?
  • From: boku
• Re: A question a bout hive-based registry
  • From: Richlad
• Re: A question a bout hive-based registry
  • From: Richlad
• Re: Stuck after downloading image; now what?
  • From: Jeff_Birt
• Re: WinCE USB: Power over USB
  • From: David Liao \(MS\)
• Re: Wifi woes - views on this PB debug trace?
  • From: "Soemin Tjong [MSFT]"
• Re: BSP GeodeLAX:X86 under WinCe 5.0
  • From: Paul G. Tobey [eMVP]
• Re: A question a bout hive-based registry
  • From: Anthony Pellerin
• French keyboard
  • From: Albert
• Vendor ID for USB Function Driver and wceusbsh.inf
  • From: Michael Reim
• Re: Problems loading driver with ActivateDeviceEx
  • From: Ole
• Re: A question a bout hive-based registry
  • From: Bruce Eitman [eMVP]
• pxa27x keypad
  • From: gustavocuozzo
• Re: Problem about XIP bootup
  • From: Dean Ramsier
• Re: How to add new baudrate to wince4.2,for example 230400
  • From: Remi de Gravelaine
• Re: Sd card detect
  • From: seshucherukuri
• Re: Ohci reset in CPU sleep
  • From: sand
• Re: How to add new baudrate to wince4.2,for example 230400
  • From: peter
• Re: Can CETK be run without KITL installed?
  • From: Anthony Pellerin
• Re: Cannot restore files from the RECYCLE BIN !!!
  • From: Michael Reim
• WinCE USB: Power over USB
  • From: Albert Taucher
• Re: Problems loading driver with ActivateDeviceEx
  • From: Valter Minute
• Re: Ohci reset in CPU sleep
  • From: K. S. Huang
• Re: wince booting slow
  • From: Valter Minute
• Re: How to add new baudrate to wince4.2,for example 230400
  • From: Valter Minute
• Can CETK be run without KITL installed?
  • From: boku
• Re: BuildAndSysgen Process Hanging
  • From: Valter Minute
• Re: A question a bout hive-based registry
  • From: Anthony Pellerin
• Re: Problems loading driver with ActivateDeviceEx
  • From: Anthony Pellerin
• Re: How to find the source location from a Exception Address ?
  • From: charlesrltk
• Re: A question a bout hive-based registry
  • From: Richlad
• Re: why I can not install activesync driver first but second can?
  • From: K. S. Huang
• Problems loading driver with ActivateDeviceEx
  • From: Ole
• Re: A question a bout hive-based registry
  • From: Anthony Pellerin
• Re: About bluetooth obex profile
  • From: Anthony Pellerin
• Re: why I can not install activesync driver first but second can?
  • From: briansccd
• Re: How to add new baudrate to wince4.2,for example 230400
  • From: Remi de Gravelaine
• Re: Wifi woes - views on this PB debug trace?
  • From: Nick Farrow
• Re: LEAP
  • From: Remi de Gravelaine
• Re: BSP GeodeLAX:X86 under WinCe 5.0
  • From: Damien Zins
• Re: How to reduce detecting time of USB device?
  • From: Henrik Viklund
• Re: wince booting slow
  • From: eddie
• Re: cdrom copying problem
  • From: voidcoder
• Re: SD card detect for SD card driver
  • From: seshucherukuri
• Re: Problem in creating a custom OS image for WinCE 5.0
  • From: Doug Cook \(MS\)
• Re: why I can not install activesync driver first but second can?
  • From: K. S. Huang
• Re: why I can not install activesync driver first but second can?
  • From: briansccd
• Re: Browse information
  • From: Jeff_Birt
• Re: Problem about XIP bootup
  • From: eg_yskaa
• Re: DMA to SPI with descriptors (PXA27x)
  • From: bluesphere
• Re: SD card detect for SD card driver
  • From: voidcoder
• Re: LEAP
  • From: Paul G. Tobey [eMVP]
• Re: Power Management Suspend Order
  • From: voidcoder
• Re: lpBytesReturned in KernelLibIoControl
  • From: Steve Maillet \(eMVP\)
• Re: BuildAndSysgen Process Hanging
  • From: Steve Maillet \(eMVP\)
• Re: Wifi woes - views on this PB debug trace?
  • From: Paul G. Tobey [eMVP]
• Re: BSP GeodeLAX:X86 under WinCe 5.0
  • From: Paul G. Tobey [eMVP]
• Ohci reset in CPU sleep
  • From: sand
• Re: cdrom copying problem
  • From: Matt
• Re: Problem about XIP bootup
  • From: Dean Ramsier
• Re: How to find the source location from a Exception Address ?
  • From: Michael J. Salamone
• Re: USB mass storage
  • From: Valter Minute
• Re: Domain Control Register
  • From: voidcoder
• Re: why I can not install activesync driver first but second can?
  • From: K. S. Huang
• Re: cdrom copying problem
  • From: voidcoder
• Re: DMA to SPI with descriptors (PXA27x)
  • From: Fredrik Jansson
• Re: USB mass storage
  • From: Mhaxx
• How to find the source location from a Exception Address ?
  • From: charlesrltk
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: onof
• Re: Copy NK.bin from SD Card to Flash
  • From: Valter Minute
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: Valter Minute
• Re: Stuck after downloading image; now what?
  • From: Valter Minute
• why I can not install activesync driver first but second can?
  • From: briansccd
• Re: Copy NK.bin from SD Card to Flash
  • From: Valter Minute
• Wifi woes - views on this PB debug trace?
  • From: Nick Farrow
• Re: SD card detect for SD card driver
  • From: seshucherukuri
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: onof
• Re: wince booting slow
  • From: Valter Minute
• Re: share dma interrupt
  • From: Valter Minute
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: K. S. Huang
• Re: CSR Bluetooth over UART interface
  • From: Alan Chong
• Re: SD card detect for SD card driver
  • From: voidcoder
• Re: wince booting slow
  • From: voidcoder
• WMFA CE5 startup time
  • From: Niels Brouwers
• Re: share dma interrupt
  • From: Mr.f
• lpBytesReturned in KernelLibIoControl
  • From: Ole
• Problem about XIP bootup
  • From: eg_yskaa
• wince booting slow
  • From: eddie
• SD card detect for SD card driver
  • From: seshucherukuri
• Re: Remote update
  • From: Amit
• Re: CSR Bluetooth over UART interface
  • From: Suzanne
• Re: How dos WinCE OS load DLL into SLOT 0?
  • From: Henrik Viklund
• More than 10 instances of a device in Windows CE 5.0
  • From: JohanB
• Re: Sd card detect
  • From: seshucherukuri
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: briansccd
• Re: share dma interrupt
  • From: starry night
• Stuck after downloading image; now what?
  • From: Jeff_Birt
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: K. S. Huang
• Re: log tab info during debugging
  • From: Singer
• Re: share dma interrupt
  • From: Mr.f
• Re: share dma interrupt
  • From: Mr.f
• Re: share dma interrupt
  • From: starry night
• Re: About Installable ISR
  • From: bluesphere
• Re: DMA to SPI with descriptors (PXA27x)
  • From: bluesphere
• Re: USB over current
  • From: David Liao \(MS\)
• Re: How dos WinCE OS load DLL into SLOT 0?
  • From: Henrik Viklund
• Re: Strata flash failure using FMD driver
  • From: alexquisi
• Re: Strata flash failure using FMD driver
  • From: Henrik Viklund
• Strata flash failure using FMD driver
  • From: Dave Peverley
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: Valter Minute
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: onof
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE ev
  • From: Paul G. Tobey [eMVP]
• Re: log tab info during debugging
  • From: Chloe Oliot \(MS\)
• Re: Sd card driver in WinCE
  • From: seshucherukuri
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE ev
  • From: Michael J. Salamone
• Re: About FMD_ReadSector()....
  • From: Steve Maillet \(eMVP\)
• Copy ohcd.def from common to workspace folder
  • From: Michael Reim
• Re: WinCE Update releases for the month of September 2006
  • From: Andrew at Plextek
• Re: CE 3.0 Platform builder availability
  • From: Valter Minute
• Re: CE 3.0 Platform builder availability
  • From: Dean Ramsier
• Help!!! The problem about activesync, who can help me? Thank you.
  • From: briansccd
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: Valter Minute
• Re: USB over current
  • From: Darren Steadman
• Re: USB over current
  • From: Darren Steadman
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: onof
• Re: [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: Valter Minute
• [WinCe 5.00] DEBUGCHK failed in coredll.cpp line 169
  • From: onof
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE ev
  • From: zzhikang
• Re: Remote update
  • From: Valter Minute
• Re: share dma interrupt
  • From: Valter Minute
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: Initialize hardware for SD card
  • From: Henrik Viklund
• log tab info during debugging
  • From: Singer
• Re: DMA to SPI with descriptors (PXA27x)
  • From: Fredrik Jansson
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• DeviceIOControl failed (code 87) problem
  • From: Shar
• Remote update
  • From: Amit
• About Installable ISR
  • From: starry night
• Re: Please HELP me! About EBOOT and Image
  • From: John Lee
• CE 3.0 Platform builder availability
  • From: AAndreas
• Debugging the EAPOL key exchange on a WPA 802.11 connection
  • From: Josh
• Re: DMA to SPI with descriptors (PXA27x)
  • From: bluesphere
• Bluetooth Enable Device Under Test Mode (DUT)
  • From: coltop
• WinCE Update releases for the month of September 2006
  • From: QFEAdmin \(MS\)
• Re: MP3 streaming problems
  • From: TechNick
• WinCE Update releases for the month of September 2006
  • From: QFEAdmin \(MS\)
• Re: USB over current
  • From: Darren Steadman
• Re: USB mass storage
  • From: Matt
• Re: USB over current
  • From: David Liao \(MS\)
• Re: Browse information
  • From: Ole
• Re: mstli.exe
  • From: Paul G. Tobey [eMVP]
• Re: Getting started with NDISUIO
  • From: Paul G. Tobey [eMVP]
• Re: Browse information
  • From: Valter Minute
• Re: Browse information
  • From: Ole
• Re: USB mass storage
  • From: Valter Minute
• USB mass storage
  • From: Mhaxx
• Re: Sd card driver in WinCE
  • From: seshucherukuri
• Re: Browse information
  • From: Remi de Gravelaine
• Re: Need to save registry settings on a custom emulator built using Platform Builder 4.2
  • From: hsubbaram
• Re: Browse information
  • From: Ole
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Getting started with NDISUIO
  • From: sarath
• Re: CE 3.0 Platform builder availability
  • From: Steve Maillet \(eMVP\)
• Re: Strange MMU problem in bootloader
  • From: Steve Maillet \(eMVP\)
• Domain Control Register
  • From: Andy
• Re: Browse information
  • From: Ole
• Re: Initialize hardware for SD card
  • From: Henrik Viklund
• Re: CE 3.0 Platform builder availability
  • From: Dean Ramsier
• Strange MMU problem in bootloader
  • From: ali88z@xxxxxxxxx
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: briansccd
• Re: DMA to SPI with descriptors (PXA27x)
  • From: Fredrik Jansson
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: Initialize hardware for SD card
  • From: Henrik Viklund
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: USB over current
  • From: Darren Steadman
• Re: USB over current
  • From: Darren Steadman
• Re: Flashed image doesn't load
  • From: gouri
• Re: CSR Bluetooth over UART interface
  • From: Alan Chong
• MP3 streaming problems
  • From: TechNick
• Re: Flashed image doesn't load
  • From: Fredrik Jansson
• Re: USB over current
  • From: Darren Steadman
• Re: Controlling and knowing active processes i.e. forms
  • From: Valter Minute
• Re: EnterCriticalSection inside the Driver throwing Exception 004
  • From: Valter Minute
• Re: EnterCriticalSection inside the Driver throwing Exception 004
  • From: Helge Kruse
• Re: Driver load at run time
  • From: Valter Minute
• RE: Flashed image doesn't load
  • From: gouri
• Re: DMA to SPI with descriptors (PXA27x)
  • From: Fredrik Jansson
• EnterCriticalSection inside the Driver throwing Exception 004
  • From: milton
• EnterCriticalSection inside the Driver throwing Exception 004
  • From: milton
• CETK NDIS Card Tests without KITL
  • From: Shar
• Re: How to place one DLL in SLOT 1?
  • From: K. S. Huang
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: K. S. Huang
• Re: anyone can help me
  • From: Bruce Eitman [eMVP]
• Re: necessity of registerdevice()
  • From: Steve Maillet \(eMVP\)
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE ev
  • From: Michael J. Salamone
• Re: Correct use of CTL_CODE?
  • From: Ole
• Re: Correct use of CTL_CODE?
  • From: Remi de Gravelaine
• Browse information
  • From: Ole
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: briansccd
• anyone can help me
  • From: b.d bhaskar
• necessity of registerdevice()
  • From: b.d bhaskar
• Re: Atmel AT91SAM9261 ARM processor advice
  • From: Steve Maillet \(eMVP\)
• Re: calling one driver from another?
  • From: Steve Maillet \(eMVP\)
• Correct use of CTL_CODE?
  • From: Ole
• Re: cdrom copying problem
  • From: Matt
• Re: Win CE 5.0 USB serial
  • From: <ctacke/>
• calling one driver from another?
  • From: skindiver
• Re: Sd card driver in WinCE
  • From: seshucherukuri
• Re: Please HELP me! About EBOOT and Image
  • From: John Lee
• Re: Please HELP me! About EBOOT and Image
  • From: John Lee
• CE 3.0 Platform builder availability
  • From: AAndreas
• Re: mstli.exe
  • From: ganesan
• Atmel AT91SAM9261 ARM processor advice
  • From: Ken Crismon
• Re: cdrom copying problem
  • From: Matt
• Re: Win CE 5.0 USB serial
  • From: voidcoder
• Re: Win CE 5.0 USB serial
  • From: voidcoder
• Need to save registry settings on a custom emulator built using Platform Builder 4.2
  • From: hsubbaram
• Formatting SD cards
  • From: new techiee
• Re: Win CE 5.0 USB serial
  • From: voidcoder
• Advanced Adapter Setting doesn't work!!!
  • From: dchung
• Re: cdrom copying problem
  • From: voidcoder
• Re: cdrom copying problem
  • From: Matt
• Re: DMA to SPI with descriptors (PXA27x)
  • From: voidcoder
• Re: cdrom copying problem
  • From: voidcoder
• Re: Sd card driver in WinCE
  • From: Ratheesh Rajan [MSFT]
• cdrom copying problem
  • From: Matt
• Re: PB remote tools cannot access Smartphone emulator image
  • From: Howard Cunningham
• Re: Driver load at run time
  • From: Ole
• Re: USB over current
  • From: David Liao \(MS\)
• Re: Driver load at run time
  • From: Steve Maillet \(eMVP\)
• Re: Driver load at run time
  • From: Steve Maillet \(eMVP\)
• Re: No cursor at cerdisp
  • From: <ctacke/>
• Re: Problematic access to this newsgroup
  • From: Paul G. Tobey [eMVP]
• Re: Problematic access to this newsgroup
  • From: Remi de Gravelaine
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Paul G. Tobey [eMVP]
• Re: WCE5: ps/2 port driver fails - now I know what exactly fails
  • From: Paul G. Tobey [eMVP]
• Re: Problematic access to this newsgroup
  • From: Paul G. Tobey [eMVP]
• Re: Multi-ICE, eXDI and Platform Buildr 5.0
  • From: Anthony Pellerin
• Re: Sd card driver in WinCE
  • From: Bruce Eitman [eMVP]
• Re: Driver load at run time
  • From: Valter Minute
• Re: Driver load at run time
  • From: Ole
• Re: Driver load at run time
  • From: Valter Minute
• Re: Driver load at run time
  • From: Remi de Gravelaine
• Re: Problematic access to this newsgroup
  • From: Remi de Gravelaine
• Re: Driver load at run time
  • From: Steve Maillet \(eMVP\)
• Re: Initialize hardware for SD card
  • From: Henrik Viklund
• Sd card driver in WinCE
  • From: seshucherukuri
• Re: Problematic access to this newsgroup
  • From: Ole
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Driver load at run time
  • From: Ole
• Re: Problematic access to this newsgroup
  • From: Valter Minute
• Re: Problematic access to this newsgroup
  • From: R. de Gravelaine
• Re: Problematic access to this newsgroup
  • From: Valter Minute
• Re: Problematic access to this newsgroup
  • From: Remi de Gravelaine
• DMA to SPI with descriptors (PXA27x)
  • From: Fredrik Jansson
• Re: Problematic access to this newsgroup
  • From: Valter Minute
• Re: Problematic access to this newsgroup
  • From: Remi de Gravelaine
• Re: WCE5: ps/2 port driver fails - now I know what exactly fails
  • From: Remi de Gravelaine
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: Problematic access to this newsgroup
  • From: Andrew at Plextek
• Problematic access to this newsgroup
  • From: Remi de Gravelaine
• Re: Sending parameters to ISR dll
  • From: Remi de Gravelaine
• Re: WCE5: ps/2 port driver fails - now I know what exactly fails
  • From: SergeiR
• Re: Sending parameters to ISR dll
  • From: Ole
• Please HELP me! About EBOOT and Image
  • From: John Lee
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Chungyeh Wang
• Re: Debugging application
  • From: Marco Malentacchi
• Re: problem in inclusion of Aygshell
  • From: rakesh
• Re: USB Mass storage signon is sloooooow
  • From: Samuel Phung
• Re: Sending parameters to ISR dll
  • From: Steve Maillet \(eMVP\)
• Re: Debugging application
  • From: Chloe Oliot \(MS\)
• PCI card driver for PB5.0
  • From: weilinzeng
• Re: problem in inclusion of Aygshell
  • From: Ross Jordan [MSFT]
• Re: Debugging application
  • From: Marco Malentacchi
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: ActvieSync with no handshake
  • From: voidcoder
• Re: Screen Capture C/C++ code
  • From: voidcoder
• Re: Screen Capture C/C++ code
  • From: Steve Maillet \(eMVP\)
• Re: Sending parameters to ISR dll
  • From: Steve Maillet \(eMVP\)
• Re: ActvieSync with no handshake
  • From: Thomas Johansen
• Re: Sending parameters to ISR dll
  • From: Steve Maillet \(eMVP\)
• Re: Issues with source files and conditionals
  • From: Dean Ramsier
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: Issues with source files and conditionals
  • From: Henrik Viklund
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: Sending parameters to ISR dll
  • From: Paul G. Tobey [eMVP]
• Re: WCE5: ps/2 port driver fails - where to look ?
  • From: Paul G. Tobey [eMVP]
• Re: Sending parameters to ISR dll
  • From: Steve Maillet \(eMVP\)
• Re: WCE5: ps/2 port driver fails - where to look ?
  • From: SergeiR
• Re: USB Mass storage signon is sloooooow - Solved
  • From: aplamon
• Re: Sending parameters to ISR dll
  • From: Paul G. Tobey [eMVP]
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE event?
  • From: Paul G. Tobey [eMVP]
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Paul G. Tobey [eMVP]
• Re: How Can we avoid the sysgen errors?
  • From: Bruce Eitman [eMVP]
• Re: USB Mass storage signon is sloooooow
  • From: aplamon
• USB Mass storage signon is sloooooow
  • From: aplamon
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Chungyeh Wang
• Re: Problem in creating a custom OS image for WinCE 5.0
  • From: <ctacke/>
• Re: Sending parameters to ISR dll
  • From: Ole
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Stefano
• intel 2700g source driver and performances
  • From: Topomoto
• Re: Sending parameters to ISR dll
  • From: Remi de Gravelaine
• Re: Why will SetWindowLong(hWnd,GWL_STYLE, xxx) trigger WM_SIZE event?
  • From: Michael J. Salamone
• Re: File Transfer protocol service in bluetooth
  • From: Omkar Singh
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Valter Minute
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Stefano
• Sending parameters to ISR dll
  • From: Ole
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Valter Minute
• Re: Initialize hardware for SD card
  • From: seshucherukuri
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Stefano
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Valter Minute
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Stefano
• Re: Help on VOIP
  • From: Fabrizio Ciciani
• Re: WCE5: ps/2 port driver fails - where to look ?
  • From: Remi de Gravelaine
• Re: Debugging application
  • From: Valter Minute
• Re: Debugging application
  • From: voidcoder
• Re: ActvieSync with no handshake
  • From: voidcoder
• Re: Command Procesor output redirection
  • From: voidcoder
• Re: bluetooth HID profile
  • From: Anthony Pellerin
• Re: File Transfer protocol service in bluetooth
  • From: Anthony Pellerin
• Re: Diagnostic code for memory cards SDIO
  • From: Anthony Pellerin
• CSR Bluetooth over UART interface
  • From: Suzanne
• Re: open drain mode Sd cards
  • From: seshucherukuri
• Re: How Can we avoid the sysgen errors?
  • From: K. S. Huang
• Re: open drain mode Sd cards
  • From: Henrik Viklund
• Re: open drain mode Sd cards
  • From: seshucherukuri
• Re: open drain mode
  • From: seshucherukuri
• Re: SD Memory Performance Tuning,
  • From: nutty . sawant
• Diagnostic code for memory cards SDIO
  • From: nutty . sawant
• Re: USB Diagnostic Application
  • From: nutty . sawant
• Debugging application
  • From: Marco Malentacchi
• Re: Command Procesor output redirection
  • From: Upender R Sandadi [MS]
• Re: BSP architecture, reccomended practice
  • From: Bruce Eitman [eMVP]
• Re: BSP architecture, reccomended practice
  • From: Steve Maillet \(eMVP\)
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Steve Maillet \(eMVP\)
• ActvieSync with no handshake
  • From: Thomas Johansen
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Dean Ramsier
• BSP architecture, reccomended practice
  • From: Jeff_Birt
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff_Birt
• Re: PB basic
  • From: Bruce Eitman [eMVP]
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Dean Ramsier
• Re: RAM based Rulez
  • From: Bruce Eitman [eMVP]
• Re: Command Procesor output redirection
  • From: Paul G. Tobey [eMVP]
• Re: RAM based Rulez
  • From: Paul G. Tobey [eMVP]
• Re: NTLMSetUserInfo
  • From: aplamon
• Re: RAM based Rulez
  • From: Steve Maillet \(eMVP\)
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Steve Maillet \(eMVP\)
• Re: problem in inclusion of Aygshell
  • From: Steve Maillet \(eMVP\)
• Re: KITL and NDIS sharing NIC on hive-based registry build leads to hang
  • From: Dean Ramsier
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Dean Ramsier
• Re: File Transfer protocol service in bluetooth
  • From: Anthony Pellerin
• problem in inclusion of Aygshell
  • From: msnews.microsoft.com
• Re: Help on VOIP
  • From: Fabrizio Ciciani
• Re-direct \Temp to RAM disk
  • From: AJM42
• Re: Command Procesor output redirection
  • From: voidcoder
• Re: Aewin EM6330 Problem for debugging
  • From: voidcoder
• Re: USB HID mouse trouble
  • From: voidcoder
• Re: USB Radio
  • From: Henrik Viklund
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff_Birt
• Re: Can KLibAllocShareMem be used more than once per ISR-IST pair?
  • From: Ole
• Re: NTLMSetUserInfo
  • From: Helge Kruse
• Re: KITL and NDIS sharing NIC on hive-based registry build leads to hang
  • From: K. S. Huang
• Re: Windows CE 5.0 and Intel IXDP425 Platform
  • From: K. S. Huang
• NTLMSetUserInfo
  • From: aplamon
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff_Birt
• KITL and NDIS sharing NIC on hive-based registry build leads to hang
  • From: dave
• Re: COM2 Write, but no read
  • From: Paul G. Tobey [eMVP]
• Re: COM2 Write, but no read
  • From: Paul G. Tobey [eMVP]
• Re: COM2 Write, but no read
  • From: aplamon
• Re: Can KLibAllocShareMem be used more than once per ISR-IST pair?
  • From: Steve Maillet \(eMVP\)
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Steve Maillet \(eMVP\)
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Paul G. Tobey [eMVP]
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff_Birt
• Re: COM2 Write, but no read
  • From: Paul G. Tobey [eMVP]
• COM2 Write, but no read
  • From: aplamon
• Re: WCE5: ps/2 port driver fails - where to look ?
  • From: Sergei R
• USB Radio
  • From: abn_windowsce_help
• Can KLibAllocShareMem be used more than once per ISR-IST pair?
  • From: Ole
• Another Hive Registry problem
  • From: Jim
• Re: mstli.exe
  • From: Paul G. Tobey [eMVP]
• mstli.exe
  • From: ganesan
• Re: My program at startup
  • From: Remi de Gravelaine
• Re: Source line mismatch in kernel-debugging
  • From: Dean Ramsier
• Re: Help on VOIP
  • From: Grass
• Re: Help on VOIP
  • From: Valter Minute
• Re: Help on VOIP
  • From: Fabrizio Ciciani
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Paul G. Tobey [eMVP]
• Re: Windows CE 5.0 and Intel IXDP425 Platform
  • From: Paul G. Tobey [eMVP]
• Re: Leave files out of image
  • From: Valter Minute
• Re: Leave files out of image
  • From: Dean Ramsier
• Re: My program at startup
  • From: Dean Ramsier
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Paul G. Tobey [eMVP]
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Dean Ramsier
• Re: WNetAddConnection3 and Windows Logon Credentials
  • From: Valter Minute
• Re: Command Procesor output redirection
  • From: Paul G. Tobey [eMVP]
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Paul G. Tobey [eMVP]
• Re: Help on VOIP
  • From: Valter Minute
• Re: Leave files out of image
  • From: Remi de Gravelaine
• Re: My program at startup
  • From: Remi de Gravelaine
• Re: USB Diagnostic Application
  • From: Valter Minute
• WNetAddConnection3 and Windows Logon Credentials
  • From: Stefano
• Help on VOIP
  • From: Fabrizio Ciciani
• Re: USB Diagnostic Application
  • From: nutty . sawant
• Re: Aewin EM6330 Problem for debugging
  • From: voidcoder
• Re: Loading virtual serial port driver on different platforms
  • From: Steve Maillet \(eMVP\)
• Re: My program at startup
  • From: Luke Dunstan
• Re: i.Mx21 ADS BSP
  • From: Sujeet
• Re: Aewin EM6330 Problem for debugging
  • From: Damien Zins
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff . Birt
• Re: i.Mx21 ADS BSP
  • From: voidcoder
• Re: Aewin EM6330 Problem for debugging
  • From: voidcoder
• BSP for AMD GX 1500 DB Geode series
  • From: ashok
• Re: i.Mx21 ADS BSP
  • From: voidcoder
• Re: i.Mx21 ADS BSP
  • From: Valter Minute
• Re: Aewin EM6330 Problem for debugging
  • From: voidcoder
• Re: PD updates
  • From: voidcoder
• Re: WinCE Problem, Serial communication test, not reading in the ReadFile() from the serial port
  • From: Remi de Gravelaine
• Re: WCE5: ps/2 port driver fails - where to look ?
  • From: Remi de Gravelaine
• Re: ps/2 port driver fails - where to look ?
  • From: SergeiR
• Re: WinCE Problem, Serial communication test, not reading in the ReadFile() from the serial port
  • From: nutty . sawant
• Re: serial communication on the emulator.
  • From: nutty . sawant
• Re: Windows CE 5.0 and Intel IXDP425 Platform
  • From: K. S. Huang
• errors in CETK's audio testing
  • From: boku
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Chungyeh Wang
• Re: My program at startup
  • From: <ctacke/>
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Paul G. Tobey [eMVP]
• Re: TimeSVC and begin DST, one more time...
  • From: Upender R Sandadi [MS]
• Re: I/O, I/O, I'm so confused 'ya know
  • From: Jeff . Birt
• Re: I/O, I/O, I'm so confused 'ya know
  • From: voidcoder
• I/O, I/O, I'm so confused 'ya know
  • From: Jeff . Birt
• Re: how to obtain a count of device handles in use: Windows CE 5
  • From: Paul G. Tobey [eMVP]
• Re: how to obtain a count of device handles in use: Windows CE 5
  • From: SergeiR
• Re: unable to run managed code in CE 6 beta
  • From: Paul G. Tobey [eMVP]
• Re: Problems by loading an IISR
  • From: Ole
• Re: SDIO Wireless Disable
  • From: Paul G. Tobey [eMVP]
• Re: USB WIFI adapter
  • From: Tomppa
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Paul G. Tobey [eMVP]
• Re: Windows CE 5.0 and Intel IXDP425 Platform
  • From: voidcoder
• Re: PB basic
  • From: Ole
• Re: My program at startup
  • From: Remi de Gravelaine
• Re: My program at startup
  • From: voidcoder
• Re: PB basic
  • From: Ole
• My program at startup
  • From: Mhaxx
• Re: SDIO Wireless Disable
  • From: Keaven Pineau
• Windows CE 5.0 and Intel IXDP425 Platform
  • From: quipu
• Re: Problems by loading an IISR
  • From: Steve Maillet \(eMVP\)
• Windows CE 5.0 Remove Control Panel Applet
  • From: TMa
• Re: Folder name of my USB key
  • From: Roberto
• Re: Problems by loading an IISR
  • From: Valter Minute
• Re: Wanna test wave recording path
  • From: voidcoder
• Re: Windows CE 5.0 Wireless Zero Configuration
  • From: Valter Minute
• Unable to find valid server name or server IP in wcetk.txt
  • From: boku
• Wanna test wave recording path
  • From: boku
• Re: cant get ce to run with a flat panel display.
  • From: Bill T
• Re: PB basic
  • From: Steve Maillet \(eMVP\)
• Re: PB basic
  • From: Ole
• Re: Problems by loading an IISR
  • From: Steve Maillet \(eMVP\)
• Re: Problems by loading an IISR
  • From: Steve Maillet \(eMVP\)
• Re: PB basic
  • From: Steve Maillet \(eMVP\)
• Re: Problems by loading an IISR
  • From: R. de Gravelaine
• Re: PB basic
  • From: Ole
• PB basic
  • From: Ole
• Re: Problems by loading an IISR
  • From: Ole
• Re: How to resolve the problem of resume and suspend of usb kitl?
  • From: K. S. Huang
• Re: Problems by loading an IISR
  • From: Remi de Gravelaine
• Re: Problems by loading an IISR
  • From: Ole
• Re: Problems by loading an IISR
  • From: Steve Maillet \(eMVP\)
• Problems by loading an IISR
  • From: Ole
• How to resolve the problem of resume and suspend of usb kitl?
  • From: briansccd
• Re: USB WIFI adapter
  • From: Luc Cool
• Re: USB WIFI adapter
  • From: Paul G. Tobey [eMVP]
• Re: USB WIFI adapter
  • From: Luc Cool
• Re: SDIO Wireless Disable
  • From: Paul G. Tobey [eMVP]
• Re: 7 hours still cant get active sync working ...
  • From: Luc Cool
• Re: SDIO Wireless Disable
  • From: Keaven Pineau
• Re: PB remote tools cannot access Smartphone emulator image
  • From: Sean Kelleher [MSFT]
• Re: Application can't run
  • From: Joseph F
• Re: unable to run managed code in CE 6 beta
  • From: Paul G. Tobey [eMVP]
• Re: 2577
  • From: Steve Maillet \(eMVP\)
• Re: Help! How to develop a CardBus Modem Driver??
  • From: David Liao \(MS\)
• Re: how to obtain a count of device handles in use: Windows CE 5
  • From: Paul G. Tobey [eMVP]
• how to obtain a count of device handles in use: Windows CE 5
  • From: SergeiR
• Re: USB WIFI adapter
  • From: Paul G. Tobey [eMVP]
• Re: installing platform builder
  • From: Paul G. Tobey [eMVP]
• Re: why my activesync only sync file from pc to device?
  • From: Paul G. Tobey [eMVP]
• RE: PB remote tools cannot access Smartphone emulator image
  • From: Howard Cunningham
• Re: 7 hours still cant get active sync working ...
  • From: Anthony Pellerin
• Re: Folder name of my USB key
  • From: Anthony Pellerin
• Re: installing platform builder
  • From: ajay . sonawane
• Re: 2577
  • From: <ctacke/>
• Re: USB mass storage problem , workaround - WinCE5.0
  • From: Bruce Eitman [eMVP]
• Re: USB On-The-Go
  • From: Valter Minute
• Re: Ethernet connect
  • From: Valter Minute
• Re: WinCE Problem, Serial communication test, not reading in the ReadFile() from the serial port
  • From: nutty . sawant
• Re: installing platform builder
  • From: Bruce Eitman [eMVP]
• Re: Buffer size in serial port???
  • From: Dean Ramsier
• 2577
  • From: Mhaxx
• Re: USB mass storage problem , workaround - WinCE5.0
  • From: Dean Ramsier
• Re: More Help required ARM PXA255, PB5.0 Kernel startup
  • From: Dean Ramsier
• Re: installing platform builder
  • From: ajay . sonawane
• Re: installing platform builder
  • From: <ctacke/>
• Re: Ethernet connect
  • From: Henrik Viklund
• Re: Installable ISR - general questions
  • From: Remi de Gravelaine
• Re: Ethernet connect
  • From: Khagesh Chaudhari
• Re: Ethernet connect
  • From: Valter Minute
• Re: Ethernet connect
  • From: Henrik Viklund
• Re: USB On-The-Go
  • From: Henrik Viklund
• Re: Ethernet connect
  • From: Khagesh Chaudhari
• Re: USB On-The-Go
  • From: Valter Minute
• Re: Installable ISR - general questions
  • From: Valter Minute
• Re: unable to run managed code in CE 6 beta
  • From: Valter Minute
• Re: installing windows ce 5.0 updates
  • From: Erwin Zwart
• Re: Installable ISR - general questions
  • From: Ole
• Re: More Help required ARM PXA255, PB5.0 Kernel startup
  • From: grolo
• Re: More Help required ARM PXA255, PB5.0 Kernel startup
  • From: grolo
• USB WIFI adapter
  • From: Luc Cool
• Re: Ethernet connect
  • From: Valter Minute
• Re: Installable ISR - general questions
  • From: Valter Minute
• Re: serial communication on the emulator.
  • From: voidcoder
• Re: serial communication on the emulator.
  • From: nutty . sawant
• Re: Installable ISR - general questions
  • From: Ole
• Re: using USB download kernel image instead of ethernet DHCP
  • From: Henrik Viklund
• Ethernet connect
  • From: Chaitali Thigle
• RE: USB mass storage problem , workaround - WinCE5.0
  • From: Rob
• installing windows ce 5.0 updates
  • From: ajay . sonawane
• Re: Installable ISR - general questions
  • From: Remi de Gravelaine
• Re: Mapping of Serial API Commands to Streamdriver
  • From: Jack
• Re: Mapping of Serial API Commands to Streamdriver
  • From: voidcoder
• Re: serial communication on the emulator.
  • From: voidcoder
• Re: Mapping of Serial API Commands to Streamdriver
  • From: Jack
• Re: Mapping of Serial API Commands to Streamdriver
  • From: voidcoder
• Mapping of Serial API Commands to Streamdriver
  • From: Jack
• Re: installing platform builder
  • From: ajay . sonawane
• Re: WinCE Problem, Serial communication test, not reading in the ReadFile() from the serial port
  • From: nutty . sawant
• Re: serial communication on the emulator.
  • From: nutty . sawant
• Re: Media player shown 0x8007000e error and exception in QUARTZ.dll
  • From: creative
• Re: Qn - How to Build a system with persistent storage??
  • From: Richi
• Re: Qn - How to Build a system with persistent storage??
  • From: Ratheesh Rajan [MSFT]
• Re: Buffer size in serial port???
  • From: TextCenter
• Re: Help! How to develop a CardBus Modem Driver??
  • From: B.R.Liao
• using USB download kernel image instead of ethernet DHCP
  • From: zhangcang
• Re: why my activesync only sync file from pc to device?
  • From: briansccd
• the wince device connection with vb.net smart device project
  • From: pukudengulata

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(14)