Re: Flashed image doesn't load

Have you disabled KITL in your image ? If not, the image might be waiting
for a KITL connection to PB

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADENEO
Windows Embedded Manager
ychammings AT adeneo DOT adetelgroup DOT com>
http://www.adeneo-embedded.com
Tél : +33 (0)4.72.18.08.40
Fax : +33 (0)4.72.18.08.41
----------------------------------------------------------------

"Fredrik Jansson" <fredrik.jansson@xxxxxxxxxxxxx> a écrit dans le message de
news: %23tgnGJz1GHA.4772@xxxxxxxxxxxxxxxxxxxxxxx
Hi!

I have a PXA27x Processor Developer's Kit from Intel. I have been working
with an image for a while and decided to try to flash it.

I have flashed the "standard" Mainstone III boot loader and I use it to
download images via ethernet to the device.

This time I disabled debug, kitl etc and enabled "Write Run-time Image to
Flash Memory (IMGFLASH=1) and sysgened the image.

When I download it I see the following and it boots correctly...

INFO: FlashErase: erasing flash BAA80000 to BB97FFFF. Please wait...
............................................................
INFO: FlashWrite: writing to flash...
...........................................................
INFO: FlashWrite: verifying the data written to flash...
INFO: FlashWrite: flash programmed successfully!
ROMHDR at Address 9AA80044h
INFO: FlashErase: erasing flash BAA40000 to BAA7FFFF. Please wait...
.
INFO: FlashWrite: writing to flash...

INFO: FlashWrite: verifying the data written to flash...
INFO: FlashWrite: flash programmed successfully!
Download successful! Jumping to image at 0x9AA81000 (physical 0x81000)...
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFWindows CE Kernel for ARM (Thumb Enabled) Built on Jun 24
2004 at 18:25:00
ProcessorType=0411 Revision=7
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable =
9aa843dc
Sp=ffffc7cc


When restarting the device I manually choose "Launch existing flash
resident image now" and gets the following:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built
Nov 9 2005 06:15:26
Microsoft Windows CE Ethernet Bootloader 1.11 for the Intel MainstoneIII
Development Platform Built Jun 19 2006

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 3 seconds.

EBoot Loader Configuration:

0) IP address: 192.168.19.60
1) Subnet mask: 255.255.255.0
2) Boot delay: 3 seconds
3) DHCP: (Enabled)
4) Reset to factory default configuration
5) RNDIS MAC address: 0-E-C-80-7A-CE
6) Download new image at startup
7) Boot device order: PCMCIA0 -> PCMCIA1 -> SMSC -> USB
8) Debug serial port: BTUART
D) Download image now
L) Launch existing flash resident image now
U) Boot to ULDR: (No)


Enter your selection: l
INFO: Trying to locate/initialize PCMCIA NIC in slot 0...
INFO: Trying to locate/initialize PCMCIA NIC in slot 1...
INFO: Trying to initialize the built-in SMSC NIC...
INFO: SMSC LAN91C111 Ethernet controller initialized.
INFO: MAC address: 0-E-C-80-7A-CE
System ready!
Preparing for download...
INFO: Using device name: 'MAINSTN31438'
Download successful! Jumping to image at 0x9AA81000 (Windows CE Kernel
for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0411 Revision=7
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable =
9aa843dc
Sp=ffffc7cc


After this the device goes quiet and doesn't boot...

Does anyone have any ideas? Maybe this isn't the way to do it...

Best regards,
Fredrik Jansson



.

Relevant Pages

  • Re: Flashed image doesnt load
    ... with an image for a while and decided to try to flash it. ... When I download it I see the following and it boots correctly... ... INFO: FlashWrite: verifying the data written to flash... ... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Flashed image doesnt load
    ... with an image for a while and decided to try to flash it. ... When I download it I see the following and it boots correctly... ... INFO: FlashWrite: verifying the data written to flash... ... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built ...
    (microsoft.public.windowsce.platbuilder)
  • RE: Flashed image doesnt load
    ... with an image for a while and decided to try to flash it. ... When I download it I see the following and it boots correctly... ... INFO: FlashWrite: verifying the data written to flash... ... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Flashed image doesnt load
    ... with an image for a while and decided to try to flash it. ... When I download it I see the following and it boots correctly... ... INFO: FlashWrite: verifying the data written to flash... ... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built ...
    (microsoft.public.windowsce.platbuilder)
  • Re: O/T techie help needed - Flash
    ... I had to go back to March 18th, before a Windows ... tried to download flash again it did the same thing just two seconds ... The Barsteward wrote: ...
    (uk.rec.competitions)