Re: CF card detection in WinCE 5.0
- From: "jesusgs" <jesus.gonzalez.s@xxxxxxxxx>
- Date: 17 Aug 2006 09:58:28 -0700
Hi,
talking about Compact Flash, I have no answers but additional questions
:-(
I've been trying to use a Compact Flash for some time, althought I'm
afraid I'm still have some problems and doubts.
My scenario:
- XScale (ARM based) CPU
- PB 5.0
- PCMCIA Controller, TI1520 PCI bridge ("TI PC Card" + "PCI Bus"
components)
- "Compact Flash / PC Card Storage (ATADISK)" component
- Compact Flash (SanDisk/PQI)
I also added the following drivers manually:
pcc_tipccard.dll $(_FLATRELEASEDIR)\pcc_tipccard.dll
NK SH
pcc_serv.dll $(_FLATRELEASEDIR)\pcc_serv.dll
NK SH
Pcmcia.dll $(_FLATRELEASEDIR)\pcc_pcm.dll
NK SH
I think these components are all I need to put the compact flash into
operation (no ATAPI driver, and no other related drivers). Am I missing
anything? Any basic concept wrong?
Of course I have a lot of logs, but basically the final situation is
that the load ATADISK driver fails trying to "find adequate
configuration".
Thanks in advance!
Jesus
Paul G. Tobey [eMVP] ha escrito:
Don't start a new thread like this. This isn't a chat. Threaded discussion
allows people to look back in the thread and see what's going on. When you
start a new thread to continue a discussion, it really interferes with that.
What are the specs on the card? It's an ATA Flash card? How is the CF slot
on your board wired up? It's connected to the PCMCIA controller? If it is
a PCMCIA slot, no the only things you should need are the PCMCIA host
controller driver for your board/processor, the ATA Flash driver that I told
you about before, and things which those items are dependent upon and which
should be included automatically. You did a SYSGEN after the last change?
You deleted any persistent registry after the last change?
Paul T.
"Sandeep" <Sandeep@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FA75C00E-0C93-4626-8843-03CCB18E7194@xxxxxxxxxxxxxxxx
Hi Paul,
Thanks for your advice.
but after adding the catalog item I m still getting dialog box for
unidentified PCCard adaptar.
I have SanDisk CF card. Do I need separate driver for this card?
Thanks
Sandeep
You're wrong. There's no such thing as a 'normal' PCMCIA card. Each card
"Paul G. Tobey [eMVP]" wrote:
type requires a driver.
Go to \Device Drivers\Storage Devices\Storage Devices\ in the Catalog in
PB
and add the Compact Flash / PC Card Storage driver.
Paul T.
"Sandeep" <Sandeep@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:821AD8FE-4859-4F5D-9603-F927173DE13B@xxxxxxxxxxxxxxxx
Hi Paul,
Thanks for reply.
I am using a normal scandisk CF memory card. I suppose I donnot require a
separate driver for normal CF memory card in WinCE5.0 as it has inbuilt
support for PCMCIA Card/PC Card. Please guide me if I am wrong.
Thanks
Sandeep
"Paul G. Tobey [eMVP]" wrote:
What sort of card *is* it?! It seems most likely that you have a driver
for
the PCMCIA bus, but not for the card you're installing.
Paul T.
"Sandeep" <Sandeep@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BAA33916-8419-4F52-9FC1-743355610754@xxxxxxxxxxxxxxxx
Hi,
I am working on PXA270 Mainstone II board in WinCE 5.0. I am trying to
detect my CF card but image is showing Unidentified PCCard Adaptor
dialog
box
and ask for the name of driver.
Platform.reg contains following code for registry setting:
; @CESYSGEN IF CE_MODULES_PCCARD
IF BSP_NOPCCARD !
#include "$(_TARGETPLATROOT)\src\drivers\pccard\pcc_mainstoneii.reg"
#include "$(DRIVERS_DIR)\pccard\mdd\pcc_serv.reg"
;[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA]
"Dll"="pcmcia.dll"
"NoConfig"=dword:1
"IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA
Card
Services"
ENDIF BSP_NOPCCARD !
; @CESYSGEN ENDIF CE_MODULES_PCCARD
I also tried to add Compact Flash/PC Card Storage (ATADISK) in catalog
driver list but no sucess.
Hyperterminal shows following message again and again when I insert CF
card:
INFO: Setting PCCARD slot 0 voltage to 0v (off).
MECR: 0
Power setting 1
-CPcmciaCardSocket::GetSocket(): dwEventMask: 1b0 dwEventChanged: b0
dwEventStatus: b0
-CPcmciaCardSocket::GetSocket(): dwEventMask: 1b0 dwEventChanged: b0
dwEventStatus: b0
CPCIEnum::ActivateDevice: ActivateDeviceEx return fails for registry
Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1
I would appreciate if anyone of you could guide me, whether I am
missing
something or some suggestions?
Thanks
Sandeep
.
- Follow-Ups:
- Re: CF card detection in WinCE 5.0
- From: Paul G. Tobey [eMVP]
- Re: CF card detection in WinCE 5.0
- References:
- CF card detection in WinCE 5.0
- From: Sandeep
- Re: CF card detection in WinCE 5.0
- From: Paul G. Tobey [eMVP]
- CF card detection in WinCE 5.0
- Prev by Date: Re: How to support bluetooth radio (USB interface) in WinCE 5.0
- Next by Date: Re: Why a warning on swconvrt.cpp?
- Previous by thread: Re: CF card detection in WinCE 5.0
- Next by thread: Re: CF card detection in WinCE 5.0
- Index(es):
Relevant Pages
|
