Re: How to support bluetooth radio (USB interface) in WinCE 5.0

I don't know what to tell you. The DLink adapter worked fine for me. There
are numerous places where you can have problems if you didn't include the
right components in the OS or didn't set them up correctly for your
hardware, of course. We'll need debug output messages showing where the
failure occurs to proceed any further, I think.

Paul T.

"Aurelie" <Aurelie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D712FD93-90AF-46CE-9D60-B111494D1A77@xxxxxxxxxxxxxxxx
Hello Paul,

yes I read your answer, the thing is that I have already tried with a
Socket
adapter, an iogear and an air cable adapter and none of them is accepted.
I
will tried the Dlink dongle but I am quite pessimistic...

I am working on a Bsp and platform builder workspace sent by a board
manufacturer. It seems that the BSP was first shipped with ce4.2 that's
why I
beleive there may be a problem with the usb drivers... (Nevertheless, usb
storage is ok, usb mouse and keyboard are working too...)

Best regards
Aurelie


"Paul G. Tobey [eMVP]" wrote:

I posted one in my last message. Did you read the thread?

Paul T.

"Aurelie" <Aurelie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F8E519F8-3C31-48E5-9499-69361546BDE0@xxxxxxxxxxxxxxxx
Hi,

I am faced with exactly the same problem. Did you find a solution or a
special USB to bluetooth dongle that works ?

Thanks in advance
Best regards

"fenix" a écrit :

Hi!
We built an WinCE 5.0 OS to support bluetooth radio, but it can not
work.
The WinCE OS can not identify the USB interface Bluetooth radio, and
it
asked
for the driver name of the unidentified USB device.
We have already added all the catalog items in "Networking - Persional
Area
Network[PAN]" and in "Personal Area Networking [PAN] devices".
The bluetooth radio is USB interface, and it is OK on Windows XP. We
have
also tested another type of bluetooth radio, but the result is same.
By the way, there is something different in WinCE 4.2. We added
"Bluetooth
with integrated USB-Only Driver" and "OHCI", the Bluetooth is OK.
Any help would be appreciated.
Thanks in advance.

Best regards






.

Relevant Pages

  • Re: How to support bluetooth radio (USB interface) in WinCE 5.0
    ... I've had the best success with USB Bluetooth adapters using the Universal ... We built an WinCE 5.0 OS to support bluetooth radio, ... for the driver name of the unidentified USB device. ...
    (microsoft.public.windowsce.platbuilder)
  • Wireless USB Disconnects Work Around?
    ... my 802.11b wireless USB adapter disconnects randomly and without ... multiple wireless channels, played with all available "preamble type" ... share IRQ's with the USB host controller. ... I used a command built into Windows XP ...
    (microsoft.public.windowsxp.network_web)
  • Re: USB to Serial Bridge
    ... Ein nicht korrekt installiertes USB Gerät wird auch nicht mit Strom ... ATEN liefert nur einen Kabel USB zu Seriell Adapter. ... auf die *.inf Datei und installieren wählen. ... Der Treiber legt einen virtuellen COM Port an mit einer Nummer größer ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: USB connected HDs
    ... connected the included external power adapter to the HD and the USB ... HDs I own and with USB flash drives. ... the auxiliary power supply connector. ...
    (microsoft.public.windowsxp.general)
  • Re: USB connected HDs
    ... the included external power adapter to the HD and the USB ... I own and with USB flash drives. ... the auxiliary power supply connector. ...
    (microsoft.public.windowsxp.general)
Loading