Re: PXA27x GPIO Interrupt

Henrik Viklund wrote:
Ah, you're right. As the disclaimer said, i don't have the MIII code at
hand and went from memory (which, in retrospect may not have been the
best thing to do, since I think I'm actually thinking more of the MII
BSP than the MIII BSP).
Ah... :-) IIRC this was all added new in the MSIII BSP so is closer to
the ideal than it was before ; at least you don't have to implement so
much yourself to do this!

Best Wishes,

Dave Peverley
.

Relevant Pages

  • Re: IPNAT and memory leakage
    ... I use my own BSP for IXP425. ... I found that if I exclude the IPNAT in the os image, the memory will NOT ... I found this when using DMA ... >> The Stress test suite only includes the Registry, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: QNX and ARM
    ... that I must change the source of the BSP ... to match my hardware, but I don't know how can I begin? ... Maps - Flash Memory and RAM memory info) ... would come handy if you have your own bootloader to transfer the ...
    (comp.arch.embedded)
  • Re: .NET Compact Framework support in PB 5.0
    ... David Jones wrote: ... "Henrik Viklund" wrote: ... I am helping to develop a custom BSP for a proprietary board using PB ... I would like to find out if .NET CF support ...
    (microsoft.public.windowsce.platbuilder)
  • Configuration memory address not initialized
    ... I've been having a hard time with the IXDP425 BSP. ... Intel's BSP on our own board with added peripherals. ... Config and the next one for the Peripherals have good values. ... that memory segment and enable the CS7. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Configuration memory address not initialized
    ... mapping for CS7. ... I've been having a hard time with the IXDP425 BSP. ... that memory segment and enable the CS7. ...
    (microsoft.public.windowsce.platbuilder)