Re: LCD_Backlight

Hello Voidcoder,
Thankyou for reply !!!!
Actually I am able to acess the events in my backlight driver ie it does set
the activity event("PowerManager/SystemActivity_Active") during boot then
after 10 sec(set in registry) it sets the inactivity event
("PowerManager/SystemActivity_Inactive") and I am able to acknowledge it in
my backlight driver. I am trying to set the activity event in my touch driver
so that every time i touch the screen the activity event is set and the the
activity timer count initializes. Now this does not happen!! I am setting the
event as follows:
if(SetEvent(SysAct_Reset))
NKDbgPrintfW(TEXT("ASA:Reset event set\r\n"));

Note: SysAct_Reset is the handle to
"PowerManager/ActivityTimer/SystemActivity" event

what happens is that once the inactivity event is set the light goes off and
does not resume back. I am resetting the manual reset inactivity event
("PowerManager/SystemActivity_Inactive") by reset event.
What could be the issue ??? In anticipation of your reply ASAP.

"voidcoder" wrote:

Actually activity timers are named as follow:

PowerManager/ActivityTimer/$Activity$
PowerManager/$Activity$_Active
PowerManager/$Activity$_Inactive

Eg.

"PowerManager/ActivityTimer/SystemActivity"
"PowerManager/SystemActivity_Active"
"PowerManager/SystemActivity_Inactive"

Use OpenEvent() to access events.


"Anurag" <Anurag@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:A2F1D358-DE0B-4FC6-B084-D283DAADF6F2@xxxxxxxxxxxxxxxx
Hello Voidcoder,
Thankyou for your reply .
certainly setting the power states would be much better however for the
purpose of curiosity I tried adding that registry entry
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\ActivityTimers\SystemActivity]
"Timeout"=dword:A

and then created the events with the same names i.e, SystemActivity_Active
&
SystemActivity_Inactive in my driver however these events get created. Now
according to WinCE documentation (wince help topic Activitytimers) Upon
initialization, the Power Manager reads the registry to acquire a list of
activity timer names and creates the following events:
A timer reset event.
An active status manual-reset event.
A manual-reset event.

hence when i create the events with thier names Createevent() should
return
ERROR_ALREADY_EXISTS however this doesn't happen the events get created.
why is it so????
What needs to be done in this case??

"Voidcoder" wrote:

I would advice to not touch the system activity
timer directly. Better build a simple driver and
handle the power IOCTLs. You will need to
handle IOCTL_POWER_SET ioctl this way:

IOCTL_POWER_SET - D0 -> turn backlight on
IOCTL_POWER_SET - D1 -> turn backlight off


"Anurag" <Anurag@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:ADEEAC32-2DCE-4ABF-B45C-E83EC1BE1D1F@xxxxxxxxxxxxxxxx
Hello everybody,
I am trying to develop a screen saver like facility for my WINCE Image
i.e,
after a predifined time of inactivity the LCD backlight should be OFF
and
on some activity like a touch on the touchscren the backlight should
get ON
I reffered the wince documentation "activity timer "and find that
activity
timers can be used i.e, set an activity timer
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\ActivityTimers\SystemActivity]
"Timeout"=dword:A
"WakeSources"=multi_sz:"0x20"


and the power manager handles the events.. Also the event can be
handled via
driver. In my case I am using the wince full power management as it is.
I am
a bit confused on the overall working as to how do i open a handle to
the
reset event in a driver? once the timeout is done how do i turn off my
backlight?
In my target the backlight is located on a gpio and can be controlled
via it
. Should i create a bcklight driver? if yes how to call the driver
once the
timeout is done.
I would be highly obliged to recieve your guidance
regarding
the same
Thankyou.

Ansh






.

Relevant Pages

  • Re: LCD_Backlight
    ... DWORD dwBacklightTimeout = ReadTimeoutFromRegistry; ... Actually I am able to acess the events in my backlight driver ie it does set ... activity timer count initializes. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: LCD_Backlight
    ... This are my registry settings: ... In my backlight driver Init function I create two events with thier names ... when i touch the screen it does not set the activity timer event and my ...
    (microsoft.public.windowsce.platbuilder)
  • Re: rc6+ regression - backlight reset to 0 on boot after 7c0ea45be4f114d85ee35caeead8e1660699c46
    ... even if _BQC method (query current backlight level) is missing. ... Bugs in the video driver ...
    (Linux-Kernel)
  • Re: LCD_Backlight
    ... PowerManager/SystemActivity_Inactive (both manual reset event) ... a backlight driver may use the pair of manual-reset events ... when i touch the screen it does not set the activity timer event and my ...
    (microsoft.public.windowsce.platbuilder)
  • Re: LCD_Backlight
    ... I am using the standard wince5.0 full power management.It is in the PM ... a backlight driver may use the pair of manual-reset events ... when i touch the screen it does not set the activity timer event and my ...
    (microsoft.public.windowsce.platbuilder)
Loading