Re: USB data Transfer question

Tech-Archive recommends: Fix windows errors by optimizing your registry

Post your IssueBulkTransfer call here. I'm not sure, but may
be something is wrong there.

"Charles Wang" <Charles Wang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4CAD4799-7723-48B1-BD16-A8228EDF2A26@xxxxxxxxxxxxxxxx
The USB host and Client are CE device.

When I read the data from Client, in my app I can see the data "hello" in
the first several times and then start dumpping like "heeeeeeee...".
when I tried to printf out the value of pBuffer in IssueBulkTransfer(..,
pBuffer,),
the value is always 0 even though I can see the data correctly in my app.

As I said in OP, I can write data from host to client, I can see the data in
my app running in client, and both USB analizer and the pBuffer value is the
right value I am trying to transfer.

Any ideas?



"Charles Wang" wrote:

I guess the USB2Serial driver you mentioned is the USB Function Client driver.
The driver I worte is for host. I want to Read/Write into USB hostport as a
comport.



"voidcoder" wrote:

May be I'm missing something, but CE already includes
USB2Serial driver... what are you doing exactly? Give us
some details. For example you may want to tell
is your device USB Host or USB Device, and what is
on the oposite side? Desktop? Different device?



"Charles Wang" <CharlesWang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:50614146-40A1-46CC-9B25-F99D79DBDA39@xxxxxxxxxxxxxxxx
I wrote a USB to Serial driver on CE ARM device.
and the write function which write data from USB host to client works
fine,
but when tried to read data from client, just occasionally get the serial
data, most likely, host only read partial data.

USB analizer tells that Writing from USB host to Client works fine, but
always error when I tried to read data from Client, no matter I got data
complete or not.
eg. if I write "Hello" in Client, I can read "Hello" in the beginning some
times, then I'll get "HHH......" or "lllll....." or "oooo..." randomly.
The
USB analizer always tells "no data".

Any ideas?







.

Relevant Pages

  • Re: USB data Transfer question
    ... BTW, after I load my driver, in xxx_iocontrol funciton, the dwcode ... the pBuffer!=0 if there is data sending from client. ... and both USB analizer and the pBuffer value is the ... and the write function which write data from USB host to client works ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB data Transfer question
    ... I'm afraid you can't pass 1-byte length buffer ... the pBuffer!=0 if there is data sending from client. ... and both USB analizer and the pBuffer value is the ... and the write function which write data from USB host to client works ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB data Transfer question
    ... when I tried to printf out the value of pBuffer in IssueBulkTransfer(.., ... As I said in OP, I can write data from host to client, I can see the data in ... and both USB analizer and the pBuffer value is the ... and the write function which write data from USB host to client works ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ActiveSync 4.2 not working on WM5.0 device over USB Serial Function driver
    ... If you have manually set an IP address on the PC and so turned off the DHCP client on the PC, then you will need to manually set a different and valid IP address on the USB port to allow the device to talk TCP/IP to the PC. ... > I have made sure that all the settings are done as per the requirement. ...
    (microsoft.public.pocketpc)
  • Re: USB host controller and client driver
    ... "The USB function controller drvers come into picture only if your ... WinCE ported processor is to act as a client. ... client driver - adds useful functionality. ...
    (microsoft.public.windowsce.platbuilder)