microsoft.public.windowsce.platbuilder

• Thread Index

• Re: BinFS, RAM & ROM FS, ?
  • From: Dean Ramsier
• Re: Can I have eboot and miniport driver over same NIC?
  • From: Dean Ramsier
• Re: Newbie - Getting Networking going on CEPC
  • From: IceVan
• Re: Using ISP1362 USB Controller on Lubbock Based Board (Intel DBPXA250) with Windows CE
  • From: Bruce Eitman \(eMVP\)
• Re: more than 10 'same' device file names in CE 5.0?
  • From: ravi
• Using ISP1362 USB Controller on Lubbock Based Board (Intel DBPXA250) with Windows CE
  • From: Fornazin
• Re: Newbie - Getting Networking going on CEPC
  • From: Marcelovk
• Newbie - Getting Networking going on CEPC
  • From: IceVan
• Re: Managed code project in PB
  • From: skindiver
• Re: FormatPartition dev
  • From: Bruce Eitman \(eMVP\)
• Can I have eboot and miniport driver over same NIC?
  • From: Raghav
• Re: How to open serial ports larger than COM9
  • From: ravi
• Re: Managed code project in PB
  • From: skindiver
• Re: How to display YCbCr4:2:2 format image using DirectShow's filters
  • From: bluesphere
• BinFS, RAM & ROM FS, ?
  • From: B.R.Liao
• Re: Change IPaddress on a running system?
  • From: Paul G. Tobey [eMVP]
• Re: WZCTool licensing question
  • From: Paul G. Tobey [eMVP]
• Re: file copy/paste cancel
  • From: Paul G. Tobey [eMVP]
• Re: ISR I2C Question
  • From: Steve Maillet \(eMVP\)
• ISR I2C Question
  • From: tony
• FormatPartition dev
  • From: Massimo
• Re: IXP425 ethernet miniport driver fails
  • From: cflin
• IGMPv3
  • From: gunajoe
• Re: BSP development step by step
  • From: Sergeant
• Re: avtivesync
  • From: home
• Re: PXA270 PCMCIA problem
  • From: Javier
• Re: Windows CE Threading questions
  • From: Michael J. Salamone
• Re: How to open serial ports larger than COM9
  • From: Yannick Chamming's [eMVP]
• Re: Windows CE Threading questions
  • From: Yannick Chamming's [eMVP]
• Re: Windows CE Threading questions
  • From: AC
• Re: WinCE on x86
  • From: Steve Maillet \(eMVP\)
• Re: Device Driver Not Working on CE 5.0 from CE 4.2
  • From: John Baik
• Re: BSP development step by step
  • From: John Baik
• Re: more than 10 'same' device file names in CE 5.0?
  • From: John Baik
• Re: more than 10 'same' device file names in CE 5.0?
  • From: Steve Maillet \(eMVP\)
• Re: Windows CE Threading questions
  • From: Steve Maillet \(eMVP\)
• Re: Build question
  • From: Steve Maillet \(eMVP\)
• Re: WinCE on x86
  • From: Steve Maillet \(eMVP\)
• Re: Implement RTC in Windows CE
  • From: Zhongwei Wang
• more than 10 'same' device file names in CE 5.0?
  • From: ravi
• Re: Managed code project in PB
  • From: skindiver
• Re: Managed code project in PB
  • From: skindiver
• Windows CE Threading questions
  • From: AC
• Re: HKEY_LOCAL_MACHINE\loader\
  • From: Bruce Eitman \(eMVP\)
• Re: WinCE on x86
  • From: Chris Tacke [MVP]
• Re: WinCE on x86
  • From: Ansuya
• Re: Managed code project in PB
  • From: Steve Maillet \(eMVP\)
• Error launching applications from Taskman shell in WinCE 5.0
  • From: Ajit
• Re: Touch Sound
  • From: Paul G. Tobey [eMVP]
• Re: Daylight & Windows CE 5
  • From: Paul G. Tobey [eMVP]
• Managed code project in PB
  • From: skindiver
• Re: How to add file to program directory,not windows directory?
  • From: fred
• RE: SMB Server on Windows CE 5.0 without authentication
  • From: Vinz
• Re: WinCE on x86
  • From: Steve Maillet \(eMVP\)
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Dean Ramsier
• Re: Build question
  • From: Dean Ramsier
• Re: WinCE on x86
  • From: Steve Maillet \(eMVP\)
• LINKSYS WCF54G 802.11 Wireless Compact Flash & CE
  • From: edxwce
• BSP development step by step
  • From: Sergeant
• Re: How to open serial ports larger than COM9
  • From: avn
• SQL CE 3.0
  • From: B.R.Liao
• How to display YCbCr4:2:2 format image using DirectShow's filters
  • From: Daniel
• Re: How to open serial ports larger than COM9
  • From: Helge Kruse
• Help for Quad UARt Support
  • From: deepaklakhani1982
• Re: what types of USB printer,who are still selling on market, are supported by WinCE.net 4.2?
  • From: vlick
• HKEY_LOCAL_MACHINE\loader\
  • From: mobilevil
• Re: How to open serial ports larger than COM9
  • From: Johnny Lee
• Re: Build question
  • From: Yannick Chamming's [eMVP]
• Re: How to open serial ports larger than COM9
  • From: Helge Kruse
• How to open serial ports larger than COM9
  • From: Johnny Lee
• what types of USB printer,who are still selling on market, are supported by WinCE.net 4.2?
  • From: zhongjiank@xxxxxxxxxxxxx
• Re: WinCE on x86
  • From: John Eldridge [MSFT]
• Re: Bluetooth ftp profile failure?!!
  • From: mikec
• DNW Errors: Cant open usb device
  • From: Akhil
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: newcomer
• Re: WinCE on x86
  • From: Ansuya
• Re: WinCE on x86
  • From: Chris Tacke [MVP]
• Re: WinCE on x86
  • From: Paul G. Tobey [eMVP]
• Re: USB Mouse Problems
  • From: Dean Ramsier
• Cloning netui--DLL linked with wrong .res file ???
  • From: Jim
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Sha Viswanathan [MSFT]
• Re: ST16C550 serial driver development problem
  • From: Steve Maillet \(eMVP\)
• Re: WM5 Memory
  • From: Bruce Eitman \(eMVP\)
• Re: USB Mouse Problems
  • From: tony
• USB Mouse Problems
  • From: tony
• Re: Touch Sound
  • From: Paul G. Tobey [eMVP]
• Re: Wep key configuration
  • From: Piet
• Wep key configuration
  • From: Guillaume Texier
• Re: Build platform problem (PB 4.2)
  • From: Bruce Eitman \(eMVP\)
• Build platform problem (PB 4.2)
  • From: hakan aktan
• Re: avtivesync
  • From: Voidcoder
• avtivesync
  • From: man
• Re: Implement RTC in Windows CE
  • From: CiticPacific
• Problems with starting apps
  • From: Sergeant
• Re: Understanding bluetooth on WM 5
  • From: K. S. Huang
• Re: Question about touch screen calibration
  • From: campos
• Re: Understanding bluetooth on WM 5
  • From: Yannick Chamming's [eMVP]
• Re: Question about touch screen calibration
  • From: Yannick Chamming's [eMVP]
• Question about touch screen calibration
  • From: campos
• bluetooth pan stack unload throws data abort exception
  • From: skindiver
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: newcomer
• "RNAAPP slowly sync with ActiveSync" Problem
  • From: 阿隆西
• Re: Understanding bluetooth on WM 5
  • From: awm129
• Re: Address used by DMA
  • From: bluesphere
• Re: Mainstone for Windows Mobile 5.0?
  • From: John Baik
• Re: google & MSDN
  • From: John Baik
• Re: PXA270 PCMCIA problem
  • From: John Baik
• Re: Banner utility
  • From: Chris Tacke [MVP]
• Re: ST16C550 serial driver development problem
  • From: Steve Maillet \(eMVP\)
• Re: Banner utility
  • From: Steve Maillet \(eMVP\)
• Re: SMB Server on Windows CE 5.0 without authentication
  • From: John Spaith [MS]
• Re: GMT offset
  • From: Paul G. Tobey [eMVP]
• Re: Understanding bluetooth on WM 5
  • From: K. S. Huang
• Re: IXP425 ethernet miniport driver fails
  • From: bbassett
• Re: Implement RTC in Windows CE
  • From: Zhongwei Wang
• Re: Implement RTC in Windows CE
  • From: bbassett
• Re: How to limit the function of activesync?
  • From: Dean Ramsier
• Re: problem in building headless device
  • From: Marcelovk
• Re: Banner utility
  • From: milan
• Re: DMA Drivers on DeviceEmulator 1.0
  • From: Barry Bond [MS]
• Re: SmartcardCreateLink()
  • From: liak
• DMA Drivers on DeviceEmulator 1.0
  • From: lidas
• Re: SmartcardCreateLink()
  • From: Voidcoder
• Data persistent
  • From: Bryan Mok
• TI PCI 1510
  • From: Tarun
• Debug zones
  • From: Sergeant
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Steve Maillet \(eMVP\)
• Re: SmartcardCreateLink()
  • From: liak
• Re: SmartcardCreateLink()
  • From: Voidcoder
• Re: SmartcardCreateLink()
  • From: liak
• [Q] Sleep vs. Deep sleep with PXA27x
  • From: Jeong
• Re: Address in a page
  • From: Helge Kruse
• Address in a page
  • From: Daniel
• Re: SmartcardCreateLink()
  • From: Voidcoder
• Re: Bluetooth ftp profile failure?!!
  • From: Anthony Pellerin
• Re: How to limit the function of activesync?
  • From: Anthony Pellerin
• Re: Address used by DMA
  • From: Steve Maillet \(eMVP\)
• GMT offset
  • From: Jason Spence
• Implement RTC in Windows CE
  • From: CiticPacific
• Re: problem in building headless device
  • From: srikanthtanikonda@xxxxxxxxx
• problem with .Net Compact Framework
  • From: srikanthtanikonda@xxxxxxxxx
• IXP425 ethernet miniport driver fails
  • From: cflin
• Re: Startup
  • From: CiticPacific
• Startup
  • From: CiticPacific
• Address used by DMA
  • From: Daniel
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: newcomer
• Re: WARNING: Marvell 88W8385 Based Wi-Fi Solutions on Windows CE
  • From: Lorraine
• Re: Power management reg settings
  • From: Sha Viswanathan [MSFT]
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Sha Viswanathan [MSFT]
• Re: SBOOT serial download - PB hangs up after acknowledge
  • From: Sha Viswanathan [MSFT]
• SmartcardCreateLink()
  • From: liak
• Re: How to limit the function of activesync?
  • From: Steve Maillet \(eMVP\)
• Re: local printing problem
  • From: SergeiR
• RE: Installable ISR Question!
  • From: bluesphere
• Understanding bluetooth on WM 5
  • From: awm129
• USR5421 on CE.50
  • From: Lorraine
• Re: DCOM security warning
  • From: John Spaith [MS]
• Re: malloc & HalAllocateCommonBuffer
  • From: Steve Maillet \(eMVP\)
• Re: problem in building headless device
  • From: Marcelovk
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Voidcoder
• Implementing an 18bpp LCD on the XSCALE
  • From: authorwjf
• Re: DCOM security warning
  • From: <ctacke/>
• Re: malloc & HalAllocateCommonBuffer
  • From: K. S. Huang
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• malloc & HalAllocateCommonBuffer
  • From: Daniel
• PXA270 PCMCIA problem
  • From: Javier
• LoadLibrary in filesys.exe
  • From: Sergeant
• Re: DCOM security warning
  • From: <ctacke/>
• Re: How to add file to program directory,not windows directory?
  • From: Bruce Eitman \(eMVP\)
• Re: Bluetooth ftp profile failure?!!
  • From: mikec
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Voidcoder
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Voidcoder
• Multi-Ice with Intel PXA270
  • From: CiticPacific
• Re: ActiveSync
  • From: Yannick Chamming's [eMVP]
• Re: Has somebody add the taskman to the wince5.0
  • From: Yannick Chamming's [eMVP]
• Re: How to add file to program directory,not windows directory?
  • From: Michel Verhagen (eMVP)
• Re: Has somebody add the taskman to the wince5.0
  • From: Michael J. Salamone
• Re: Has somebody add the taskman to the wince5.0
  • From: paopaoer
• Re: Device Driver Not Working on CE 5.0 from CE 4.2
  • From: David Liao \(MS\)
• Re: local printing problem
  • From: David Liao \(MS\)
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• ST16C550 serial driver development problem
  • From: Jack Tong
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• How to limit the function of activesync?
  • From: fred
• Ethernet based image download not working?
  • From: kshitij
• Re: Installable ISR Question!
  • From: bluesphere
• Re: debug infromation missing.
  • From: OrenR
• linker problem when replacing RETAILMSG / NkDbgPrintfW with own implementation (WinCE4.20)
  • From: Mai Kee R .
• Installable ISR Question!
  • From: cnlanbo@xxxxxxxx
• Re: Has somebody add the taskman to the wince5.0
  • From: Michael J. Salamone
• Re: problem in building headless device
  • From: srikanthtanikonda@xxxxxxxxx
• Re: Power management reg settings
  • From: K. S. Huang
• Re: DCOM security warning
  • From: John Spaith [MS]
• Re: problem in building headless device
  • From: Marcelovk
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: Windows XP Embeded - Development Problem
  • From: Paul G. Tobey [eMVP]
• problem in building headless device
  • From: srikanthtanikonda@xxxxxxxxx
• Windows XP Embeded - Development Problem
  • From: Dirican, Can O
• Re: SMB file share between two CE 4.2 devices
  • From: jherman
• Re: using macros from pkfuncs.h
  • From: Steve Maillet \(eMVP\)
• Re: No IST in an NDIS Miniport?
  • From: Airohead
• Re: SMB file share between two CE 4.2 devices
  • From: Paul G. Tobey [eMVP]
• Re: Save open files on suspend
  • From: Michael Reim
• TOS also called DSCP
  • From: GR
• Re: CF WLAN driver in wince
  • From: Remi de Gravelaine
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Voidcoder
• Re: Save open files on suspend
  • From: Voidcoder
• Re: How to add Compact Framework 2.0 to the Catalog ?
  • From: Pradip Shinde
• Re: using macros from pkfuncs.h
  • From: Helge Kruse
• Re: NdisConfiguration key lifetime
  • From: Helge Kruse
• Re: Save open files on suspend
  • From: Michael Reim
• local printing problem
  • From: Pradip Shinde
• SMB file share between two CE 4.2 devices
  • From: jherman
• Problem with USB KITL
  • From: Rashmi T S
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: CE 5.0 TASKMAN Shell -- How????
  • From: paopaoer
• CF WLAN driver in wince
  • From: eddie
• Has somebody add the taskman to the wince5.0
  • From: paopaoer
• Re: PB 5.0 SDK option - .NET CF prog language Grayed out??
  • From: Chris Tacke [MVP]
• Re: How to compile the Ramdisk sample
  • From: Jacky
• Re: free incident PID
  • From: anonymous
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: voidcoder
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: voidcoder
• PB 5.0 SDK option - .NET CF prog language Grayed out??
  • From: WillieJoe
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: Device wakes up every 10 minutes.
  • From: Bruce Eitman \(eMVP\)
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Steve Maillet \(eMVP\)
• Re: Device drivers mode in WinCe
  • From: Steve Maillet \(eMVP\)
• Re: DCOM security warning
  • From: Werner
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: authorwjf
• Re: NdisConfiguration key lifetime
  • From: voidcoder
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: voidcoder
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: error when install the QFE
  • From: Jalen He [MS]
• Re: Device drivers mode in WinCe
  • From: Paul G. Tobey [eMVP]
• Re: Downloading run-time image
  • From: Ole
• Re: Device drivers mode in WinCe
  • From: Alon Peleg
• Re: 8 bit to 18 bit per pixel lookup palette
  • From: Paul G. Tobey [eMVP]
• Re: Problem on device WakeUP from Suspend mode.
  • From: Raghav
• Re: Downloading run-time image
  • From: Anthony Pellerin
• Re: Downloading run-time image
  • From: Bruce Eitman \(eMVP\)
• Re: Downloading run-time image
  • From: Ole
• Re: Device drivers mode in WinCe
  • From: Paul G. Tobey [eMVP]
• Re: Downloading run-time image
  • From: Anthony Pellerin
• Re: SIP control modification
  • From: Paul G. Tobey [eMVP]
• Re: Build SDK Fails
  • From: Paul G. Tobey [eMVP]
• Re: Save open files on suspend
  • From: Voidcoder
• Re: Device drivers mode in WinCe
  • From: Steve Maillet \(eMVP\)
• Re: using macros from pkfuncs.h
  • From: Steve Maillet \(eMVP\)
• Re: Save open files on suspend
  • From: Michael Reim
• Downloading run-time image
  • From: Ole
• Re: Power management reg settings
  • From: avn
• Re: How to add Compact Framework 2.0 to the Catalog ?
  • From: Anthony Pellerin
• Re: Bluetooth ftp profile failure?!!
  • From: Anthony Pellerin
• How to compile the Ramdisk sample
  • From: Antoine
• Re: About Windows CE.Net 4.2 on Freescale MC9328MX1 ADS
  • From: Kane
• Re: Power management reg settings
  • From: K. S. Huang
• Re: Device drivers mode in WinCe
  • From: Dean Ramsier
• Re: using macros from pkfuncs.h
  • From: Michael J. Salamone
• Re: A strange thing of MMC card after OS wakeup。。。
  • From: cool_harber
• Re: NMAKE : fatal error U1073: don't know how to make
  • From: shortstop
• Re: Save open files on suspend
  • From: Voidcoder
• How to add Compact Framework 2.0 to the Catalog ?
  • From: Ole
• Re: Save open files on suspend
  • From: Michael Reim
• Re: Power management reg settings
  • From: avn
• Re: Sleep/Wakeup Problem with MainstoneIII BSP
  • From: Voidcoder
• Re: NdisConfiguration key lifetime
  • From: Helge Kruse
• Re: Sleep/Wakeup Problem with MainstoneIII BSP
  • From: Jeong
• Re: Bluetooth ftp profile failure?!!
  • From: mikec
• using macros from pkfuncs.h
  • From: Helge Kruse
• Re: DCOM security warning
  • From: John Spaith [MS]
• Obtain DLL for driver component not in catalog
  • From: Mark
• Device Driver Not Working on CE 5.0 from CE 4.2
  • From: mark
• Re: Problem on device WakeUP from Suspend mode.
  • From: Chris Tacke [MVP]
• Re: Problem on device WakeUP from Suspend mode.
  • From: Chris Tacke [MVP]
• Re: Save open files on suspend
  • From: voidcoder
• Re: Problem on device WakeUP from Suspend mode.
  • From: Raghav
• Re: LAN91C111 on XSC1BD
  • From: S Jones
• Re: Device drivers mode in WinCe
  • From: Dean Ramsier
• Re: Power management reg settings
  • From: K. S. Huang
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: Power management reg settings
  • From: avn
• Re: Power management reg settings
  • From: K. S. Huang
• Re: Problem on device WakeUP from Suspend mode.
  • From: Chris Tacke [MVP]
• Re: windows ce migration
  • From: Bruce Eitman \(eMVP\)
• Re: Problem on device WakeUP from Suspend mode.
  • From: Raghav
• Re: windows ce migration
  • From: Tweeeek
• Re: About Windows CE.Net 4.2 on Freescale MC9328MX1 ADS
  • From: Dean Ramsier
• Re: windows ce migration
  • From: Dean Ramsier
• Power management reg settings
  • From: avn
• Re: Can't download the Windows CE 5.0 Platform Builder - Yearly Updated Full Update
  • From: Paul G. Tobey [eMVP]
• Re: question about QFE!
  • From: Paul G. Tobey [eMVP]
• Re: SIP control modification
  • From: Paul G. Tobey [eMVP]
• Re: How to export an sdk from windows CE to embedded visual basic
  • From: Paul G. Tobey [eMVP]
• windows ce migration
  • From: Tweeeek
• Re: Save open files on suspend
  • From: Michael Reim
• Re: Opening CE debug zones results in exception
  • From: avn
• Re: Error in Implementing the Boot Loader StartUp Function
  • From: Voidcoder
• Re: A strange thing of MMC card after OS wakeup。。。
  • From: cool_harber
• Re: CEPC
  • From: Chris Tacke [MVP]
• Re: Save open files on suspend
  • From: Voidcoder
• Error in Implementing the Boot Loader StartUp Function
  • From: ultrawater
• Save open files on suspend
  • From: Michael Reim
• Re: debug infromation missing.
  • From: Remi de Gravelaine
• Re: NAND Flash problem of hive-based registry
  • From: yuanbo
• Re: CEPC
  • From: Ulrich Eckhardt
• Re: Opening CE debug zones results in exception
  • From: Voidcoder
• About Windows CE.Net 4.2 on Freescale MC9328MX1 ADS
  • From: xuguangyi
• Re: Sleep/Wakeup Problem with MainstoneIII BSP
  • From: Voidcoder
• RE: NMAKE : fatal error U1073: don't know how to make
  • From: Luca Calligaris
• Re: ActiveSync
  • From: Mhaxx
• Re: debug infromation missing.
  • From: OrenR
• Re: ActiveSync
  • From: Yannick Chamming's [eMVP]
• Re: Sleep/Wakeup Problem with MainstoneIII BSP
  • From: Yannick Chamming's [eMVP]
• Re: How to export an sdk from windows CE to embedded visual basic
  • From: Yannick Chamming's [eMVP]
• Re: debug infromation missing.
  • From: Yannick Chamming's [eMVP]
• Re: question about QFE!
  • From: Yannick Chamming's [eMVP]
• Re: another QFE question
  • From: Yannick Chamming's [eMVP]
• Re: How can I solve this problem about ActiveSync?
  • From: Voidcoder
• Opening CE debug zones results in exception
  • From: avn
• NMAKE : fatal error U1073: don't know how to make
  • From: shortstop
• Re: Problem on device WakeUP from Suspend mode.
  • From: Chris Tacke [MVP]
• Sleep/Wakeup Problem with MainstoneIII BSP
  • From: Jeong
• Re: How to export an sdk from windows CE to embedded visual basic
  • From: Trioz
• Problem on device WakeUP from Suspend mode.
  • From: Raghav
• Re: How can I solve this problem about ActiveSync?
  • From: yuanbo
• Re: free incident PID
  • From: Steve Maillet \(eMVP\)
• Re: Bluetooth ftp profile failure?!!
  • From: Greg Scott [MS]
• Re: Banner utility
  • From: Chris Tacke [MVP]
• Wake on Lan support in NDIS miniport driver
  • From: Raghav
• Re: Device wakes up every 10 minutes.
  • From: Paul G. Tobey [eMVP]
• Re: Device wakes up every 10 minutes.
  • From: pavelyk
• Re: Device wakes up every 10 minutes.
  • From: Paul G. Tobey [eMVP]
• Re: DST in 2007
  • From: Paul G. Tobey [eMVP]
• Device wakes up every 10 minutes.
  • From: pavelyk
• Re: Banner utility
  • From: Bruce Eitman \(eMVP\)
• Re: Random exceptions
  • From: Dean Ramsier
• Re: Storage Device
  • From: Paul G. Tobey [eMVP]
• Re: How to export an sdk from windows CE to embedded visual basic
  • From: Paul G. Tobey [eMVP]
• Re: Sim Tool Kit
  • From: Paul G. Tobey [eMVP]
• Re: FATAL ERROR:
  • From: Voidcoder
• Re: NAND Flash problem of hive-based registry
  • From: campos
• NAND Flash problem of hive-based registry
  • From: campos
• Re: How can I solve this problem about ActiveSync?
  • From: Voidcoder
• Re: ActiveSync
  • From: Chris Tacke [MVP]
• Re: NdisConfiguration key lifetime
  • From: Voidcoder
• Re: Dynamically changing the WinCE Screen resolution
  • From: adeed Mohamed
• Re: Random exceptions
  • From: Voidcoder
• How can I solve this problem about ActiveSync?
  • From: yuanbo
• A strange thing of MMC card after OS wakeup。。。
  • From: cool_harber
• Re: Sim Tool Kit
  • From: soum
• Re: DHCP lease
  • From: Remi de Gravelaine
• Re: debug infromation missing.
  • From: OrenR
• Re: debug infromation missing.
  • From: OrenR
• Re: ActiveSync
  • From: Mhaxx
• Re: Mainstone for Windows Mobile 5.0?
  • From: Yannick Chamming's [eMVP]
• Re: ActiveSync
  • From: Yannick Chamming's [eMVP]
• Re: debug infromation missing.
  • From: Yannick Chamming's [eMVP]
• Re: Sim Tool Kit
  • From: Yannick Chamming's [eMVP]
• Re: Icon resize/spzce at desktop in WinCE5.0
  • From: Voidcoder
• How to export an sdk from windows CE to embedded visual basic
  • From: Trioz
• Sim Tool Kit
  • From: soum
• Re: Question about creating boot loader
  • From: Steve Maillet \(eMVP\)
• Re: Bluetooth ftp profile failure?!!
  • From: mikec
• Re: Question about creating boot loader
  • From: Ultrawater
• Re: Banner utility
  • From: Steve Maillet \(eMVP\)
• Re: Storage Device
  • From: Bill T
• Keyboard and Mouse on board with PXA255 (Lubbock Based)
  • From: Fornazin
• Re: Icon resize/spzce at desktop in WinCE5.0
  • From: Susan
• Re: Icon resize/spzce at desktop in WinCE5.0
  • From: Susan
• Re: LAN91C111 on XSC1BD
  • From: S Jones
• Re: Having trouble connecting PB to CEPC over ethernet
  • From: Dan McCarty
• Re: DHCP lease
  • From: Bryan Bassett
• Re: Dynamically changing the WinCE Screen resolution
  • From: Bryan Bassett
• ITL - Incompatible Client Version
  • From: pavelyk
• Re: Question about creating boot loader
  • From: Dean Ramsier
• debug infromation missing.
  • From: OrenR
• ActiveSync
  • From: Mhaxx
• Re: Question about creating boot loader
  • From: Ultrawater
• Re: Build SDK Fails
  • From: Paul G. Tobey [eMVP]
• Re: Storage Device
  • From: Paul G. Tobey [eMVP]
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: ohady
• Re: Banner utility
  • From: Paul G. Tobey [eMVP]
• SBOOT serial download - PB hangs up after acknowledge
  • From: Niels Brouwers
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: ohady
• Re: How gpe_ddi.lib linked to gpe.lib
  • From: Dean Ramsier
• Re: Question about creating boot loader
  • From: Dean Ramsier
• Mainstone for Windows Mobile 5.0?
  • From: SSen
• Re: Question about creating boot loader
  • From: Anthony Pellerin
• Re: how to program set the taskbar and start menu auto hide?
  • From: Henrik Viklund
• how to program set the taskbar and start menu auto hide?
  • From: airen
• Re: INT0 Installable ISR Question!!
  • From: cnlanbo@xxxxxxxx
• How gpe_ddi.lib linked to gpe.lib
  • From: creative
• Re: USB OTG with PXA270
  • From: Piet
• Re: Bluetooth ftp profile failure?!!
  • From: Anthony Pellerin
• Re: INT0 Installable ISR Question!!
  • From: Anthony Pellerin
• Re: Dynamically changing the WinCE Screen resolution
  • From: Voidcoder
• Banner utility
  • From: milan
• Re: About 64MB RAM problem
  • From: huwenyan
• pxa255 when wake up from idle mode, irq always enabled by hardware??
  • From: newcomer
• Re: increasing COM port using USB port
  • From: Helic Lei
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: newcomer
• Re: Bluetooth ftp profile failure?!!
  • From: mikec
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Steve Maillet \(eMVP\)
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: AC
• Re: USB 1.1 vs USB2.0 Hub - portstatus
  • From: Rob
• Re: Dynamically changing the WinCE Screen resolution
  • From: adeed Mohamed
• Re: PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: Steve Maillet \(eMVP\)
• Re: INT0 Installable ISR Question!!
  • From: bluesphere
• Re: Dynamically changing the WinCE Screen resolution
  • From: voidcoder
• PXA255 wake up from Idle in OEMIdle, ISR run first or OEMIdle run first?
  • From: newcomer
• Re: Dynamically changing the WinCE Screen resolution
  • From: adeed Mohamed
• Re: Cable presense detection problem(WinCE 5.0)
  • From: OrenR
• Re: The application cannot run on this device type
  • From: Erwin
• Re: memory
  • From: K. S. Huang
• INT0 Installable ISR Question!!
  • From: cnlanbo@xxxxxxxx
• ISR Question!
  • From: cnlanbo@xxxxxxxx
• Re: Dynamically changing the WinCE Screen resolution
  • From: voidcoder
• DHCP lease
  • From: Jules . Karim
• Re: Dynamically changing the WinCE Screen resolution
  • From: adeed Mohamed
• Re: wceload
  • From: Paul G. Tobey [eMVP]
• Re: USB 1.1 vs USB2.0 Hub - portstatus
  • From: David Liao \(MS\)
• The application cannot run on this device type
  • From: PC
• wceload
  • From: PC
• Re: USB OTG with PXA270
  • From: Steve Maillet \(eMVP\)
• NdisConfiguration key lifetime
  • From: Helge Kruse
• Re: what is difference between TARGETLIBS and SOURCELIBS in sources files?
  • From: Zhongwei Wang
• Re: FPU in ISR
  • From: Steve Maillet \(eMVP\)
• USB OTG with PXA270
  • From: Piet
• Re: which function run after the OEMLaunch
  • From: Detlef
• FPU in ISR
  • From: Detlef
• Re: memory
  • From: <ctacke/>
• Re: USB Mass storage driver problem
  • From: Tucniak
• Re: Bluetooth ftp profile failure?!!
  • From: Anthony Pellerin
• Re: which function run after the OEMLaunch
  • From: Anthony Pellerin
• Re: Dynamically changing the WinCE Screen resolution
  • From: Gpeica
• Re: memory
  • From: Mhaxx
• Re: what is difference between TARGETLIBS and SOURCELIBS in sources files?
  • From: Anton Jarl
• which function run after the OEMLaunch
  • From: paopaoer
• what is difference between TARGETLIBS and SOURCELIBS in sources files?
  • From: creative
• Bluetooth ftp profile failure?!!
  • From: mikec
• Dynamically changing the WinCE Screen resolution
  • From: adeed Mohamed
• Re: Hive Registry problems
  • From: Dean Ramsier
• Re: Un-wanted projects
  • From: Steve Maillet \(eMVP\)
• Re: Un-wanted projects
  • From: Martin Howell
• Re: memory
  • From: Steve Maillet \(eMVP\)
• Re: memory
  • From: Mhaxx
• Re: memory
  • From: Paul G. Tobey [eMVP]
• Re: USB Mass storage driver problem
  • From: Janez Leskovec
• WM5: memory
  • From: Mhaxx
• Random exceptions
  • From: dav
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Rob
• Re: About 64MB RAM problem
  • From: Anthony Pellerin
• Re: shell Appliction Key define.
  • From: Voidcoder
• shell Appliction Key define.
  • From: airen
• Re: Power control panel utitlity
  • From: avn
• Re: About 64MB RAM problem
  • From: huwenyan
• Re: Use WinCE machine as a USB disk
  • From: Voidcoder
• Re: CE 5.0 on VMWare
  • From: mfr
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Rob
• Re: Un-wanted projects
  • From: Steve Maillet \(eMVP\)
• Re: CE 5.0 on VMWare
  • From: Steve Maillet \(eMVP\)
• Re: TickCount Timer Problem
  • From: Andrew Worsley
• Re: Use WinCE machine as a USB disk
  • From: Microsoft
• Re: TickCount Timer Problem
  • From: Manish
• Re: Having trouble connecting PB to CEPC over ethernet
  • From: P Boy
• Re: Setting CE Memory Division bewteen "storage" and "program" memory
  • From: Zhongwei Wang
• Re: Power control panel utitlity
  • From: Zhongwei Wang
• WinCE Update releases for the month of February 2006
  • From: QFE Admin \(MS\)
• Re: Setting CE Memory Division bewteen "storage" and "program" memory
  • From: Steve Maillet \(eMVP\)
• Re: USB data Transfer question
  • From: Charles Wang
• Re: Un-wanted projects
  • From: Martin Howell
• Setting CE Memory Division bewteen "storage" and "program" memory
  • From: kmm2
• Re: stop in process of Os starting
  • From: voidcoder
• Re: Loading USB driver for multiple interfaces...
  • From: voidcoder
• Re: Un-wanted projects
  • From: Remi de Gravelaine
• Re: Bluetooth stack
  • From: Greg Scott [MS]
• Re: Cable presense detection problem(WinCE 5.0)
  • From: Paul G. Tobey [eMVP]
• Re: Serial ports on MAINSTONE BSP
  • From: Martin Howell
• Un-wanted projects
  • From: Martin Howell
• stop in process of Os starting
  • From: MsLrl
• Re: About 64MB RAM problem
  • From: Steve Maillet \(eMVP\)
• Power control panel utitlity
  • From: avn
• Cable presense detection problem(WinCE 5.0)
  • From: OrenR
• Re: Hive Registry problems
  • From: Steve
• Re: Loading USB driver for multiple interfaces...
  • From: kemin
• Re: Use WinCE machine as a USB disk
  • From: Voidcoder
• CEPC Issues
  • From: DoriD
• Re: Use WinCE machine as a USB disk
  • From: Microsoft
• Serial ports on MAINSTONE BSP
  • From: Martin Howell
• Re: downloading problem
  • From: meribha . sherline
• Re: Input Panel pops up
  • From: Peter K.
• Re: Resume problem
  • From: Voidcoder
• Resume problem
  • From: avn
• Re: the usb start problem
  • From: Voidcoder
• Re: Loading USB driver for multiple interfaces...
  • From: Voidcoder
• Re: Use WinCE machine as a USB disk
  • From: Voidcoder
• Re: downloading problem
  • From: Voidcoder
• Re: TickCount Timer Problem
  • From: Andrew Worsley
• Re: downloading problem
  • From: meribha . sherline
• Re: schedule and timer interupt problem?
  • From: airen
• Re: Use WinCE machine as a USB disk
  • From: Microsoft
• No debug connection to the Vortex86 board
  • From: freesoul
• Re: ISR Question!
  • From: bluesphere
• Re: ndis
  • From: Michel Verhagen (eMVP)
• Re: Problems associating with preferred wireless access point
  • From: Michel Verhagen (eMVP)
• Re: TickCount Timer Problem
  • From: Michel Verhagen (eMVP)
• Re: xxx_PowerUp and XXX_PowerDown functions
  • From: avn
• Re: TickCount Timer Problem
  • From: Andrew Worsley
• Re: xxx_PowerUp and XXX_PowerDown functions
  • From: Zhongwei Wang
• Re: Having trouble connecting PB to CEPC over ethernet
  • From: Dan McCarty
• Re: Loading USB driver for multiple interfaces...
  • From: David Liao \(MS\)
• Re: xxx_PowerUp and XXX_PowerDown functions
  • From: avn
• Problems associating with preferred wireless access point
  • From: LibreStream
• Re: xxx_PowerUp and XXX_PowerDown functions
  • From: Anthony Pellerin
• Re: Input Panel pops up
  • From: Tweeeek
• Re: xxx_PowerUp and XXX_PowerDown functions
  • From: avn
• xxx_PowerUp and XXX_PowerDown functions
  • From: avn
• problem with js engine!
  • From: simon
• SD card driver FAT16 vs. FAT32 problem??
  • From: gorandem
• Re: Input Panel pops up
  • From: Luca Calligaris
• Paging in from uncompressed R/O page from XIP module
  • From: Helge Kruse
• Re: downloading problem
  • From: Voidcoder
• Re: Registry settings for host driver dll loading
  • From: meribha . sherline
• Re: About 64MB RAM problem
  • From: Anthony Pellerin
• Re: downloading problem
  • From: meribha . sherline
• Re: Use WinCE machine as a USB disk
  • From: Voidcoder
• Re: Input Panel pops up
  • From: Peter K.
• Re: Input Panel pops up
  • From: Peter K.
• Use WinCE machine as a USB disk
  • From: Microsoft
• Re: About 64MB RAM problem
  • From: huwenyan
• Re: Input Panel pops up
  • From: Voidcoder
• Re: USB Mass storage driver problem
  • From: Tucniak
• Re: UART Interrupt question
  • From: Voidcoder
• Re: downloading problem
  • From: Voidcoder
• Ceating Keyboard Layout in windows Ce 4.2
  • From: Lizard King
• Re: CE 5.0 on VMWare
  • From: mfr
• Re: Wakeup by Touch Screen Touch
  • From: Voidcoder
• Re: downloading problem
  • From: meribha . sherline
• Re: schedule and timer interupt problem?
  • From: Anthony Pellerin
• Re: About 64MB RAM problem
  • From: Anthony Pellerin
• Re: Input Panel pops up
  • From: Voidcoder
• Re: 5.0 CEPC Image Problem
  • From: okdwu007
• Re: How to use WinCE machine as a USB Disk?
  • From: okdwu007
• Re: How to use WinCE machine as a USB Disk?
  • From: okdwu007
• Re: About 64MB RAM problem
  • From: huwenyan
• Re: about USB on CE5.0
  • From: David Liao \(MS\)
• Re: Accessing the ISA bus from a PCI based CPU card
  • From: David Liao \(MS\)
• source filter registration problem with WINCE
  • From: chaitu
• ISR Question!
  • From: cnlanbo@xxxxxxxx
• Re: build fails when workspace directory is on another drive than your BSP
  • From: Ronald Sloot
• schedule and timer interupt problem?
  • From: airen
• Wakeup by Touch Screen Touch
  • From: Jules . Karim
• Re: USB data Transfer question
  • From: voidcoder
• Re: USB data Transfer question
  • From: Charles Wang
• Re: USB data Transfer question
  • From: voidcoder
• Re: Input Panel pops up
  • From: voidcoder
• Re: USB Functional dependencies
  • From: voidcoder
• Re: USB data Transfer question
  • From: Charles Wang
• Re: Having trouble connecting PB to CEPC over ethernet
  • From: P Boy
• Re: About 64MB RAM problem
  • From: Michel Verhagen (eMVP)
• Re: microsoft.public.windowsce.platbuilder, microsoft.public.win32.programmer.wince, microsoft.public.windowsce.embedded, microsoft.public.windowsce.embedded.vc, microsoft.public.windowsce.app.development
  • From: Vivek
• Re: microsoft.public.windowsce.platbuilder, microsoft.public.win32.programmer.wince, microsoft.public.windowsce.embedded, microsoft.public.windowsce.embedded.vc, microsoft.public.windowsce.app.development
  • From: Marcelovk
• Re: NDIS & 91C111
  • From: Detlef
• Re: CE 5.0 on VMWare
  • From: Marcelovk
• Re: NDIS & 91C111
  • From: Paul G. Tobey [eMVP]
• NDIS & 91C111
  • From: Detlef
• microsoft.public.windowsce.platbuilder, microsoft.public.win32.programmer.wince, microsoft.public.windowsce.embedded, microsoft.public.windowsce.embedded.vc, microsoft.public.windowsce.app.development
  • From: Vivek
• Re: USB data Transfer question
  • From: Charles Wang
• Accessing the ISA bus from a PCI based CPU card
  • From: Rolf Jarle Berge
• Virtual channel dll loads in gwes.exe insteed of cetse.exe
  • From: kunalmv
• Re: [Help] DskImage Error!
  • From: Barry Bond [MS]
• Re: Problems about the ARMV4I-based emulator BSP
  • From: Barry Bond [MS]
• How to set cellular signal strength icon through an application..
  • From: Jigar Mehta
• BINFS & FATFS Partition Problem
  • From: Himanth
• Re: Soft Keyboard does not pop up automatically
  • From: Anthony Pellerin
• Re: Hive registry not working with Release build
  • From: avn
• Ceating Keyboard Layout in windows Ce 4.2
  • From: Lizard King
• Bluetooth stack
  • From: unni
• Re: Registry settings for host driver dll loading
  • From: Anthony Pellerin
• Re: Howto eject USB mass storage disk?
  • From: CiticPacific
• Re: Hive registry not working with Release build
  • From: Anthony Pellerin
• Re: Data align problems in ARM
  • From: John Eldridge [MSFT]
• Data align problems in ARM
  • From: Microsoft
• Re: USB data Transfer question
  • From: Voidcoder
• Re: Problems about the ARMV4I-based emulator BSP
  • From: Microsoft
• Re: Problems about the ARMV4I-based emulator BSP
  • From: Microsoft
• Help! Cannot share folder on Standard SDK 5.0 emulator!
  • From: Vivek
• Re: about USB on CE5.0
  • From: CiticPacific
• PS/2 Mouse Keyboard Support
  • From: PC
• Re: Having trouble connecting PB to CEPC over ethernet
  • From: Remi de Gravelaine
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Remi de Gravelaine
• Re: Registry settings for proific usb to serial converter
  • From: Steve Maillet \(eMVP\)
• Re: Registry settings for proific usb to serial converter
  • From: <ctacke/>
• [Help] DskImage Error!
  • From: CJ
• Re: Registry settings for proific usb to serial converter
  • From: lntscm05
• VirtualWiFi for WinCE
  • From: Kimo Chi
• Hive registry not working with Release build
  • From: avn
• how can i you jpg api functions to read jpg files in wince5.0
  • From: xinchen
• Re: Implementing Networking in WincE4.2 device
  • From: Manish
• Re: Hive Registry problems
  • From: voidcoder
• Re: how can i you jpg api functions to read jpg files in wince5.0
  • From: bluesphere
• Re: how can i you jpg api functions to read jpg files in wince5.0
  • From: bluesphere
• Re: Hive Registry problems
  • From: Steve
• Re: Problems about the ARMV4I-based emulator BSP
  • From: Barry Bond [MS]
• Re: Emulator for ARMV4
  • From: Barry Bond [MS]
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: Alternatives to TFAT?
  • From: Zhongwei Wang
• Re: USB data Transfer question
  • From: Charles Wang
• Soft Keyboard does not pop up automatically
  • From: Jules . Karim
• Having trouble connecting PB to CEPC over ethernet
  • From: P Boy
• Re: Alternatives to TFAT?
  • From: Zhongwei Wang
• Re: Wscript(WHS)
  • From: John Spaith [MS]
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: Remi de Gravelaine
• Re: Problem with suspend/resume on LAN91C111
  • From: Chuck
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Remi de Gravelaine
• Re: setting IP to 224.0.0.1
  • From: Paul G. Tobey [eMVP]
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Dean Ramsier
• Re: SYMBOL_LA4137
  • From: Tweeeek
• Re: setting IP to 224.0.0.1
  • From: Paul G. Tobey [eMVP]
• Re: Implementing Networking in WincE4.2 device
  • From: Paul G. Tobey [eMVP]
• Re: USB data Transfer question
  • From: Voidcoder
• Re: SYMBOL_LA4137
  • From: Paul G. Tobey [eMVP]
• Re: Alternatives to TFAT?
  • From: Zhongwei Wang
• Re: USB data Transfer question
  • From: Charles Wang
• Creating Keyboard Layout
  • From: Lizard King
• Re: how can i you jpg api functions to read jpg files in wince5.0
  • From: Voidcoder
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: Makeimg not copying project files to FLATRELEASEDIR
  • From: Dean Ramsier
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Dean Ramsier
• CE 5.0 on VMWare
  • From: mfr
• Re: SYMBOL_LA4137
  • From: Tweeeek
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: Sathish
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: SMSC9115 Kitl debug
  • From: Martin Howell
• Re: Alternatives to TFAT?
  • From: Mark Moeller
• Re: USB 1.1 vs USB2.0 Hub - portstatus
  • From: Rob
• DskImage failed!
  • From: CJ
• Re: Rotation mode for display driver in Wince5.0
  • From: Voidcoder
• Re: how to get USB drivers work in ce 5.0?
  • From: Voidcoder
• Re: downloading problem
  • From: Voidcoder
• how to get USB drivers work in ce 5.0?
  • From: Maverick
• Re: USB data Transfer question
  • From: Voidcoder
• Re: Makeimg not copying project files to FLATRELEASEDIR
  • From: Remi de Gravelaine
• Re: SDCARDLIB debug link errors
  • From: Voidcoder
• Re: Registry settings for proific usb to serial converter
  • From: Steve Maillet \(eMVP\)
• Registry settings for proific usb to serial converter
  • From: lntscm05
• downloading problem
  • From: meribha . sherline
• Re: Registry settings for host driver dll loading
  • From: meribha . sherline
• Re: How to use WinCE machine as a USB Disk?
  • From: Microsoft
• Re: How to use WinCE machine as a USB Disk?
  • From: Randy.W.H
• Re: How to use WinCE machine as a USB Disk?
  • From: Microsoft
• Re: How to use WinCE machine as a USB Disk?
  • From: Microsoft
• Re: RAS on Virtual Serial Port (ethernet)
  • From: Steve Maillet \(eMVP\)
• Re: How to use WinCE machine as a USB Disk?
  • From: Gilatoes
• Re: How to use WinCE machine as a USB Disk?
  • From: Steve Maillet \(eMVP\)
• How to use WinCE machine as a USB Disk?
  • From: Microsoft
• Rotation mode for display driver in Wince5.0
  • From: Shijin
• Re: Implementing Networking in WincE4.2 device
  • From: Manish
• Problems about the ARMV4I-based emulator BSP
  • From: Microsoft
• Re: Alternatives to TFAT?
  • From: Chris Tacke, MVP
• Re: Paging in Windows CE
  • From: Steve Maillet \(eMVP\)
• Re: Wscript(WHS)
  • From: Steve Maillet \(eMVP\)
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: Paging in Windows CE
  • From: voidcoder
• Re: Alternatives to TFAT?
  • From: Dean Ramsier
• Re: Howto eject USB mass storage disk?
  • From: Anton Jarl
• Re: Icon resize/spzce at desktop in WinCE5.0
  • From: voidcoder
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Wscript(WHS)
  • From: Jules . Karim
• Re: Paging in Windows CE
  • From: Anton Jarl
• Re: Icon resize/spzce at desktop in WinCE5.0
  • From: voidcoder
• Re: Paging in Windows CE
  • From: voidcoder
• Paging in Windows CE
  • From: Anton Jarl
• Re: Makeimg not copying project files to FLATRELEASEDIR
  • From: Dean Ramsier
• Re: Makeimg not copying project files to FLATRELEASEDIR
  • From: Remi de Gravelaine
• Re: Implementing Networking in WincE4.2 device
  • From: Paul G. Tobey [eMVP]
• Re: Can't debug output from Visual Studio 2005 with Platform Builder WM50
  • From: Paul G. Tobey [eMVP]
• Errors at startup
  • From: Sergeant
• Re: Win CE memory pages
  • From: Steve Maillet \(eMVP\)
• Re: Virtual target that's not the emulator
  • From: Kevin D . Quitt
• Re: Win CE memory pages
  • From: Andy
• Re: RAS on Virtual Serial Port (ethernet)
  • From: Steve Maillet \(eMVP\)
• Re: direct3d mobile driver
  • From: Steve Maillet \(eMVP\)
• Re: Win CE memory pages
  • From: Steve Maillet \(eMVP\)
• Re: Keyboard and Mouse on Lubbock based board
  • From: Fornazin
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Marcelovk
• Win CE memory pages
  • From: Andy
• Re: Makeimg not copying project files to FLATRELEASEDIR
  • From: Dean Ramsier
• Re: Alternatives to TFAT?
  • From: Dean Ramsier
• problem with source filter registration
  • From: chaitu
• Re: Installation Error in PB 5.0
  • From: Peter Fillmore
• Re: USB can't work, anybody help?
  • From: Voidcoder
• Re: Cursor Size
  • From: Shijin
• Re: Problem in Jumbing to image
  • From: Voidcoder
• Makeimg not copying project files to FLATRELEASEDIR
  • From: Remi de Gravelaine
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Remi de Gravelaine
• Re: Emulator for ARMV4
  • From: Microsoft
• direct3d mobile driver
  • From: Shin,Hayan
• Re: "Empty file name"
  • From: Doug Cook [MSFT]
• Re: Installation Error in PB 5.0
  • From: Doug Cook [MSFT]
• Ceplayer not work
  • From: Peica Chen
• Re: Cirrus EP931x CPU FPU (MaverickCrunch) support?
  • From: Steve Maillet \(eMVP\)
• Problem in Jumbing to image
  • From: sathiyakeerthi
• Re: Can't debug output from Visual Studio 2005 with Platform Builder WM50
  • From: sangho
• Re: USB 1.1 vs USB2.0 Hub - portstatus
  • From: David Liao \(MS\)
• Re: Can't debug output from Visual Studio 2005 with Platform Builder WM50
  • From: sangho
• Re: USB Mass storage driver problem
  • From: Andrew Worsley
• Re: Cirrus EP931x CPU FPU (MaverickCrunch) support?
  • From: Andrew Worsley
• Re: WARNING: Marvell 88W8385 Based Wi-Fi Solutions on Windows CE
  • From: Steve Maillet \(eMVP\)
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• WARNING: Marvell 88W8385 Based Wi-Fi Solutions on Windows CE
  • From: Frustrated
• Howto eject USB mass storage disk?
  • From: Anton Jarl
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: USB data Transfer question
  • From: voidcoder
• Re: Virtual target that's not the emulator
  • From: Steve Maillet \(eMVP\)
• Re: Virtual target that's not the emulator
  • From: voidcoder
• Re: Can't install SDK
  • From: Dean Ramsier
• Virtual target that's not the emulator
  • From: Kevin D . Quitt
• Re: Can't install SDK
  • From: elpeon
• Re: SYMBOL_LA4137
  • From: Tweeeek
• Re: Implementing Networking in WincE4.2 device
  • From: Paul G. Tobey [eMVP]
• Re: Can't debug output from Visual Studio 2005 with Platform Builder WM50
  • From: Paul G. Tobey [eMVP]
• Re: SYMBOL_LA4137
  • From: Paul G. Tobey [eMVP]
• Re: Can't install SDK
  • From: Dean Ramsier
• Re: 5.0 CEPC Image Problem
  • From: Jim Frazer
• Re: SYMBOL_LA4137
  • From: Tweeeek
• 5.0 CEPC Image Problem
  • From: Jim Frazer
• Re: Cirrus EP931x CPU FPU (MaverickCrunch) support?
  • From: Dean Ramsier
• Re: CE 5.0 TASKMAN Shell -- How????
  • From: Dean Ramsier
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: How to let ActiveSync NOT change the deivce time ?
  • From: Voidcoder
• Re: How to let ActiveSync NOT change the deivce time ?
  • From: Voidcoder
• Re: USB Mass storage driver problem
  • From: Tucniak
• Re: How to let ActiveSync NOT change the deivce time ?
  • From: Tucniak
• Re: How to let ActiveSync NOT change the deivce time ?
  • From: Tucniak
• How to let ActiveSync NOT change the deivce time ?
  • From: Yu
• ExTapi not working
  • From: anony
• Can't debug output from Visual Studio 2005 with Platform Builder WM50
  • From: sangho
• Re: How to show the Software Input Panel when CE 5.0 boot-up ?
  • From: Voidcoder
• Registry Settings For an Ethernet Device
  • From: ucoklar
• Re: Platform Builder error building Mobile Handheld(windows ce device)
  • From: Voidcoder
• Re: Alternatives to TFAT?
  • From: Anthony Pellerin
• Re: Hive Registry problems
  • From: Voidcoder
• Re: Installation Error in PB 5.0
  • From: Peter Fillmore
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: Emulator for ARMV4
  • From: Anton Jarl
• Emulator for ARMV4
  • From: Microsoft
• Re: Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Tomppa
• Re: Cirrus EP931x CPU FPU (MaverickCrunch) support?
  • From: Steve Maillet \(eMVP\)
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Cirrus EP931x CPU FPU (MaverickCrunch) support?
  • From: Andrew Worsley
• Platform Builder error building Mobile Handheld(windows ce device)
  • From: Carlos Pons Farre
• RE: Detecting ActiveSync (on the device)
  • From: Tom Isaacson
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: voidcoder
• Re: command line tools
  • From: Marcelovk
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: Installation Error in PB 5.0
  • From: Doug Cook [MSFT]
• Re: No IST in an NDIS Miniport?
  • From: Airohead
• Re: Hive Registry problems
  • From: Steve
• Re: ISP1561 CE50
  • From: Bryan Bassett
• command line tools
  • From: Carlos Pons Farre
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: SYMBOL_LA4137
  • From: Paul G. Tobey [eMVP]
• Re: Power Management & Alarm
  • From: pavelyk
• Re: Can't download WinCE Update
  • From: Dean Ramsier
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: "Empty file name"
  • From: Steve Maillet \(eMVP\)
• Re: Link .obj files
  • From: Mo
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Marcelovk
• Re: Link .obj files
  • From: Voidcoder
• Re: Link .obj files
  • From: Mo
• Re: Link .obj files
  • From: Mo
• Re: Link .obj files
  • From: Mo
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: Steve Maillet \(eMVP\)
• SYMBOL_LA4137
  • From: Tweeeek
• Re: Link .obj files
  • From: Voidcoder
• Re: Link .obj files
  • From: Mo
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Voidcoder
• Re: kitl debug
  • From: Steve Maillet \(eMVP\)
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Marcelovk
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: No IST in an NDIS Miniport?
  • From: Voidcoder
• Windows CE 5.0 boot failure when USB thumb drive left attached
  • From: Matt
• Re: No IST in an NDIS Miniport?
  • From: Airohead
• SMSC9115 Kitl debug
  • From: zhiqiang
• Bulk-only USB Mass storage Function driver
  • From: ingvarr0
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Voidcoder
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Marcelovk
• Re: GrabFSPages causing exception
  • From: gd.shukla
• Detecting ActiveSync (on the device)
  • From: skindiver
• Re: Hive Registry problems
  • From: Voidcoder
• Re: Power Management & Alarm
  • From: Voidcoder
• Re: LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Voidcoder
• Power Management & Alarm
  • From: pavelyk
• Re: Link .obj files
  • From: Voidcoder
• Re: Alternatives to TFAT?
  • From: Anthony Pellerin
• Re: Cursor Size
  • From: Voidcoder
• Re: Alternatives to TFAT?
  • From: Anton Jarl
• Re: Alternatives to TFAT?
  • From: Steve Maillet \(eMVP\)
• Re: XIP and Common.bib
  • From: Bryan Mok
• Re: Cursor Size
  • From: Shijin
• LAN91C111 NDIS Windows CE 4.2 HELP!!!
  • From: Marcelovk
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: David Jones
• Re: No IST in an NDIS Miniport?
  • From: voidcoder
• Link .obj files
  • From: Mo
• Alternatives to TFAT?
  • From: Anton Jarl
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: Dean Ramsier
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: David Jones
• Re: StreamDriver XXX_Init() question
  • From: Steve Maillet \(eMVP\)
• Re: StreamDriver XXX_Init() question
  • From: Dean Ramsier
• Re: BSP_ARGS
  • From: voidcoder
• Re: WaitForSingleObject and Sleep never time out
  • From: John Eldridge [MSFT]
• Re: Display driver--why is the word fat?
  • From: voidcoder
• Re: build fails when workspace directory is on another drive than your BSP
  • From: voidcoder
• Re: Power management: what is allowed in callbacks?
  • From: Bruce Eitman \(eMVP\)
• Re: WaitForSingleObject and Sleep never time out
  • From: voidcoder
• Re: Non-Standard baudrates opening COM ports
  • From: Remi de Gravelaine
• Re: BSP_ARGS
  • From: Steve Maillet \(eMVP\)
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Steve Maillet \(eMVP\)
• Re: WaitForSingleObject and Sleep never time out
  • From: ScottNichols
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: Dean Ramsier
• Re: Built-in or not built-in, that is the question
  • From: Dean Ramsier
• Re: BSP_ARGS
  • From: Dean Ramsier
• Re: Credentials do not survive reboot
  • From: Dean Ramsier
• Re: BSP_ARGS
  • From: Voidcoder
• Re: Hive Registry problems
  • From: Steve
• Re: BSP_ARGS
  • From: Voidcoder
• Re: Cursor Size
  • From: Voidcoder
• Display driver--why is the word fat?
  • From: shortstop
• Re: Registry settings for host driver dll loading
  • From: Anthony Pellerin
• USB Mass storage driver problem
  • From: Tucniak
• Re: Non-Standard baudrates opening COM ports
  • From: lorenzobellio
• Re: Built-in or not built-in, that is the question
  • From: Anthony Pellerin
• Installation Error in PB 5.0
  • From: Peter Fillmore
• Re: WaitForSingleObject and Sleep never time out
  • From: Voidcoder
• Re: increasing COM port using USB port
  • From: lntscm05
• build fails when workspace directory is on another drive than your BSP
  • From: Ronald Sloot
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Helge Kruse
• ChangeDisplaySettingsEx
  • From: Shijin
• Re: Cursor Size
  • From: Shijin
• Built-in or not built-in, that is the question
  • From: Ten
• Re: USB Error on boot with hive registry (OK without it) .. Solved
  • From: David Jones
• Re: USB Error on boot with hive registry (OK without it) .. Solved
  • From: Michel Verhagen (eMVP)
• Re: Hive Registry problems
  • From: voidcoder
• USB DiskOnKey need help
  • From: Davidw
• Re: Power management: what is allowed in callbacks?
  • From: Steve Maillet \(eMVP\)
• Re: Power management: what is allowed in callbacks?
  • From: fransgeldhof
• Re: Power management: what is allowed in callbacks?
  • From: voidcoder
• Re: Power management: what is allowed in callbacks?
  • From: fransgeldhof
• RE: USB Error on boot with hive registry (OK without it) .. Solved
  • From: David Jones
• Re: Power management: what is allowed in callbacks?
  • From: voidcoder
• Power management: what is allowed in callbacks?
  • From: fransgeldhof
• Re: increasing COM port using USB port
  • From: Bill T
• Re: StreamDriver XXX_Init() question
  • From: bluesphere
• Re: StreamDriver XXX_Init() question
  • From: <ctacke/>
• Re: StreamDriver XXX_Init() question
  • From: bluesphere
• RE: USB Error on boot with hive registry (OK without it): Reposti
  • From: David Jones
• RE: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0 ??
  • From: David Jones
• USB Error on boot with hive registry (OK without it)
  • From: David Jones
• Re: increasing COM port using USB port
  • From: lntscm05
• Re: WaitForSingleObject and Sleep never time out
  • From: John Eldridge [MSFT]
• Re: Display driver books
  • From: avn
• Re: CS8900A Driver help
  • From: ce
• Re: StreamDriver XXX_Init() question
  • From: Steve Maillet \(eMVP\)
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Steve Maillet \(eMVP\)
• SMB Server on CE 4.2
  • From: Brian
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Helge Kruse
• Re: Flash Driver
  • From: Anand Prakash
• Re: Display driver books
  • From: Steve Maillet \(eMVP\)
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Steve Maillet \(eMVP\)
• USB Communication
  • From: Mams
• USB Communication
  • From: Mams
• ISP1561 CE50
  • From: Albert
• Display driver books
  • From: avn
• Re: How to build a CE platform with POOM built-in??
  • From: Bruce Eitman \(eMVP\)
• Re: WaitForSingleObject and Sleep never time out
  • From: Voidcoder
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Helge Kruse
• Re: How to enable hive-based registry on Slave device ?
  • From: Steve Maillet \(eMVP\)
• Re: PlatformDefines/PlatformMacro in SDK
  • From: Bruce Eitman \(eMVP\)
• Re: WaitForSingleObject and Sleep never time out
  • From: Remi de Gravelaine
• Re: Configuring RAM to 256MB on CEPC - Windows Mobile 5.0
  • From: Remi de Gravelaine
• Re: Hive Registry problems
  • From: Voidcoder
• Re: XIP and Common.bib
  • From: Dean Ramsier
• Re: WinCE WebServer
  • From: Marcelovk
• Re: Target->Connectivity Options can not find active device problem
  • From: Marcelovk
• Re: Non-Standard baudrates opening COM ports
  • From: Remi de Gravelaine
• Re: Hive Registry problems
  • From: Steve
• Re: Non-Standard baudrates opening COM ports
  • From: minimega
• Re: Hive Registry problems
  • From: Voidcoder
• Configuring RAM to 256MB on CEPC - Windows Mobile 5.0
  • From: Sathish
• Re: Hive Registry problems
  • From: Steve
• Re: What's the different from the core, professional and professional plus?
  • From: Martin Grossen, eMVP [AVNET Silica]
• What's the different from the core, professional and professional plus?
  • From: Sunlanan
• Re: Cursor Size
  • From: Voidcoder
• XIP and Common.bib
  • From: Bryan Mok
• Cursor Size
  • From: Shijin
• Re: SwMixer: WaitForBuffer failed. Audio driver missed interrupt?
  • From: Michael Reim
• Re: Non-Standard baudrates opening COM ports
  • From: Remi de Gravelaine
• Re: problem with kitl layer, while porting on pxa27x based hardware
  • From: Voidcoder
• Help needed re. Japanese Pocket IME
  • From: Peter
• Re: Target->Connectivity Options can not find active device problem
  • From: Voidcoder
• Re: Flash Driver
  • From: Anthony Pellerin
• Re: How to enable hive-based registry on Slave device ?
  • From: Voidcoder
• Re: Driver is loaded twice?..
  • From: Sergeant
• Re: Need help in completing the CEPC Tutorial
  • From: P Boy
• Re: WinCE 5.0 RAM configuration
  • From: Microsoft
• Target->Connectivity Options can not find active device problem
  • From: creative
• Re: building a new dll
  • From: Michel Verhagen (eMVP)
• Re: Need help in completing the CEPC Tutorial
  • From: Michel Verhagen (eMVP)
• Re: How to enable hive-based registry on Slave device ?
  • From: Steve Maillet \(eMVP\)
• Re: Getting PnP ID of Serial Devices for Serial enumerator.
  • From: Steve Maillet \(eMVP\)
• RE: Flash Driver
  • From: Anand Prakash
• Re: Flash Driver
  • From: Anand Prakash
• Re: Need help in completing the CEPC Tutorial
  • From: P Boy
• Keyboard and Mouse on Lubbock based board
  • From: Fornazin
• Re: How can I add 4th serial port COM4
  • From: Michel Verhagen (eMVP)
• Re: QFE for PB
  • From: Michel Verhagen (eMVP)
• Re: Need help in completing the CEPC Tutorial
  • From: Michel Verhagen (eMVP)
• Re: Need help in completing the CEPC Tutorial
  • From: P Boy
• Need help in completing the CEPC Tutorial
  • From: P Boy
• Re: QFE for PB
  • From: Dean Ramsier
• problem with kitl layer, while porting on pxa27x based hardware
  • From: irfan
• Re: Driver is loaded twice?..
  • From: Anthony Pellerin
• Windows CE 5 WPA2
  • From: Tweeeek
• Re: QFE for PB
  • From: Paul G. Tobey [eMVP]
• Driver is loaded twice?..
  • From: Sergeant
• Re: KITL Debug wiht DM9000
  • From: Voidcoder
• Re: KITL Debug wiht DM9000
  • From: red . army6007
• serial terminal for WinCE5.00
  • From: sd
• How to build a CE platform with POOM built-in??
  • From: Boyce
• Re: Hourglass: Needs tapping
  • From: Tarun
• Re: Hourglass: Needs tapping
  • From: Tarun
• Re: Non-Standard baudrates opening COM ports
  • From: Voidcoder
• Getting PnP ID of Serial Devices for Serial enumerator.
  • From: nalini . yadav
• Re: Non-Standard baudrates opening COM ports
  • From: minimega
• Re: How to enable hive-based registry on Slave device ?
  • From: Voidcoder
• Re: building a new dll
  • From: Voidcoder
• Re: KITL Debug wiht DM9000
  • From: Voidcoder
• Re: KITL Debug wiht DM9000
  • From: red . army6007
• Re: Can not format NAND FLASH Disk in WinCE 5.0
  • From: cnlanbo@xxxxxxxx
• Re: USB device driver loading
  • From: Bill T
• Re: How to enable hive-based registry on Slave device ?
  • From: Angus.Tsai
• Re: Can not format NAND FLASH Disk in WinCE 5.0
  • From: Microsoft
• Re: Can not format NAND FLASH Disk in WinCE 5.0
  • From: Microsoft
• Re: BUG REPORT: Error Report Control Panel Applet
  • From: Sean Bowles [MS]
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: Dean Ramsier
• Re: Stack overflow wipes out the file system
  • From: Dean Ramsier
• Re: CEPC Tutorial
  • From: prettyboy988-google
• Re: WinCE WebServer
  • From: John Spaith [MS]
• Re: CE device to act as USB Keyboard
  • From: GadgetmanStewart
• Re: how to get all the controls in a window
  • From: Voidcoder
• Stack overflow wipes out the file system
  • From: Ken Hill
• Re: Stop REATILMSG O/P at application Level
  • From: Voidcoder
• Re: USB RNDIS installation in PC
  • From: Voidcoder
• Re: building a new dll
  • From: Voidcoder
• Re: I am really lost
  • From: Voidcoder
• Re: calibration screen
  • From: Voidcoder
• Re: How to enable hive-based registry on Slave device ?
  • From: Voidcoder
• Re: Non-Standard baudrates opening COM ports
  • From: Voidcoder
• SwMixer: WaitForBuffer failed. Audio driver missed interrupt?
  • From: Michael Reim
• Non-Standard baudrates opening COM ports
  • From: minimega
• Re: CE device to act as USB Keyboard
  • From: Paul G. Tobey [eMVP]
• Re: problem about VirtualCopy()
  • From: Valter Minute
• Registry problems
  • From: Sergeant
• Re: calibration screen
  • From: Voidcoder
• problem about VirtualCopy()
  • From: simon wan
• Re: How to enable VMini network Driver and disable KITL?
  • From: Valter Minute
• Re: I am really lost
  • From: Valter Minute
• Re: how to get all the controls in a window
  • From: Voidcoder
• PlatformDefines/PlatformMacro in SDK
  • From: Helge Kruse
• Hourglass: Needs tapping
  • From: Tarun
• Re: how to get all the controls in a window
  • From: anony
• WinCE WebServer
  • From: lntscm05
• Re: WinCE 5.0 RAM configuration
  • From: lntscm05
• Re: Can not format NAND FLASH Disk in WinCE 5.0
  • From: cnlanbo@xxxxxxxx
• Re: Can not format NAND FLASH Disk in WinCE 5.0
  • From: cnlanbo@xxxxxxxx
• How to enable VMini network Driver and disable KITL?
  • From: cnlanbo@xxxxxxxx
• how to get all the controls in a window
  • From: anony
• Re: Debug mode hang on STPC x86 platform
  • From: Remi de Gravelaine
• Re: USB RNDIS installation in PC
  • From: Henrik Viklund
• Re: I am really lost
  • From: Valter Minute
• Re: Intel PXA27x CS5
  • From: Valter Minute
• Re: Problems with PB 5.0 on Windows XP Laptops
  • From: Valter Minute
• Can not format NAND FLASH Disk in WinCE 5.0
  • From: Microsoft
• problem with sboot
  • From: Ole
• Re: Stop REATILMSG O/P at application Level
  • From: Manish
• Re: how to power manager
  • From: snow_holgi
• Intel PXA27x CS5
  • From: CiticPacific
• Re: USB RNDIS installation in PC
  • From: Henrik Viklund
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: marco
• USB RNDIS installation in PC
  • From: Tarun
• Re: WinCE 5.0 RAM configuration
  • From: Microsoft
• Re: WinCE 5.0 RAM configuration
  • From: Microsoft
• Re: CE device to act as USB Keyboard
  • From: GadgetmanStewart
• Re: CE device to act as USB Keyboard
  • From: Paul G. Tobey [eMVP]
• Re: StreamDriver XXX_Init() question
  • From: bluesphere
• Re: CE device to act as USB Keyboard
  • From: GadgetmanStewart

• Windows
• Science
• Usenet

• Archive
• About
• Privacy
• Search
• Imprint